Park Tool Freewheel Remover Wrench FRW-1The FRW-1 is a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5/FR-11) for removal and installation. Features an investment cast head with locking setscrew and a long, round, vinyl-dipped handle for superior leverage.Features: One inch socket Securely holds freewheel Investment cast head Lone, round, vinyl dipped handle Note: Always use a skewer or axle nut to hold a cassette/freewheel tool in place during removalBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Thru Axle Adaptor (TS-TA) A fantastic addition to any Park Tool truing stand, the Park Tool Thru Axle Adaptor TS-TA allows for a wider range of wheels and hubs to be worked on, making your stand more versatile and adaptable than ever before. Added Versatility and Adaptability The application of the Park Tool Truing Stand Thru-Axle Adaptor TSTA means that your Truing Stand's capabilities will be increased for working on thru axle front wheels sized 12mm, 15mm, 20mm and 25mm, plus Cannondale Lefty wheels, making it a must-have adaptor for the mechanic looking to expand his workload. With Park Tool's TS-2.2 and TS-3 Truing Stands in mind, the adaptor will see them become more compatible with rear 135mm thru axle hubs, while their other models such as the TS-8, TS-25, TS-15, TS-7 and TS-5 will be able to handle all rear thru axles by incorporating this well-crafted adaptor from Park Tool. Features: Construction: Durable ACME Centre Rod, 2 x Centring Cones, 2 x Turning Knobs Compatibility: All Park Tool Truing Stands including - TS-2.2, TS-3, TS-8, TS-25, TS-15, TS-7 and TS-5 Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Installing cables internally though your frame can test anyone s patience however with this Internal Cable Routing Kit from Park Tool you can get the job done efficiently without any stress.This kit can help you to route gear cables, electric wires, brake cables etc on any type of bike frame whether its carbon, aluminium, titanium etc. This kit has four plastic coated 250cm cables with magnets attached and each with a unique fitting for different cable types. There s also an external guide magnet which allows you to speed up the operation. Opposite polarity magnets on the cables will attach themselves inside the frame tube making it simple to route through the frame.To keep up with new technologies this kit now includes a dedicated e-tube Di2 cable connector that will easily pull through a 6mm frame hole. This makes it easy to route through the frame saving you valuable time and this kit can be used with any frame size including tandems.This kit includes:4 x Plastic coated 250cm Cables with magnetsUnique fittingsExternal Guide Magnet
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
Never let accuracy be your nemesis with this simple yet highly effective toolCan be used with or without the tyre fitted to the wheel, thanks to its innovative designEnsures the rim is centred between the locknuts of the wheel hubAny hub width can be accommodatedFits wheels from 16 to 29 inches
A simple, one position version of the Park Tool WH-1 Wheel Holder. The Park Tool WH-2 is a quick and easy solution to securely hold nearly any wheel to make tyre, wheel, cassettes and hub work a snap. Can be bolted or clamped to a bench or installed in a bench vice. Includes axles and adaptors to fit 12, 15 and 20mm thru axles as well as quick-release and solid axle hubs.Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to:Wheel buildingCassette removal and installationTyre and tube removal and installationTubeless tire workGeneral cleaningHub workAccepts 12, 15, and 20mm thru axles and 5mm skewersE-Nickel finish for durability*Fasteners not included. The holes will accept a fastener that s up to 3/8 in diameter.
The Park Tool DC1 accurately measures seat posts, head tubes, bearings, spoke diameters and just about anything else you can think of. The DC-1 is precision made instrument built with stainless steel mechanisms and a rugged ABS composite body. The tool s ability to measure in inch fractions as well as metric and decimal standard makes it an indispensable shop tool.
Commonly referred to as a “4th Hand” the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten bolts and nuts. A must-have for any shop home or professional. BT-2 FEATURES Thumb lock for one-handed operation Made from chrome plated heat treated steel Cushion grips for comfort
The Park Tool TSB2.2. is the tilting base specifically designed for use with the Park Tool TS2 and TS2.2 Professional Wheel Truing Stands. It allows for adjustment of the truing stand 20 degrees forward or backward for comfortable use at any bench height. The handy bins in the front of the Tilting Base are specially designed to hold Park Tool Spoke Wrenches and other small items such as spoke nipples.
Key Features: Keep your most commonly used tools close at hand with this clever, multi-function tool holder, The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas, Available in two versions, the Tool Kaddie rotates for easy access and is moulded from a durable composite material, Specific slots and holders for 3-way hexes, screwdrivers, P Handles, pliers/cutters, Generic slots and holders to hold a wide variety of tools and small parts, Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately), Built in Receiver Port for PTH-1 Paper Towel Holder (sold separately).
The perfect tool to remove stubborn freewheelsLong tubular handle for maximum leverageHex shaped end accepts all Park freewheel remover toolsLocking knob holds freewheel tool securelySuper strong investment cast steel
The Park Tool QTH-1 Quick Change Bit Driver Set is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on the majority of bikes.Ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bikesThe magnetic quick-change handle allows for one-handed operation and makes changing bits quick and easyThe bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board and also includes empty spaces for 2 extra bitsIncludes the following magnetic 1/4" bits - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex, T25 Torx compatible and #2 Philips cross tipThe QTH-1 is a professional-grade tool built to withstand the rigours of daily shop use, and is fully rebuildableThe magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use, and is fully rebuildable.
Park Tool Flat Faced Socket Set (SKT-6) When it comes to maintaining and tuning your suspension for optimum performance, not only do you require the correct tools, but you need them to offer as precise a fit as possible. The Flat Faced Socket Set SKT-6 provides just that. Shop Quality Precision Sockets These sockets will work with most suspension fork fittings, making them a universally handy tool to have and are perfect for using with park Tool's Torque Wrenches for maximum compatibility. Durable and designed for regular use, the sockets are forged from chrome vanadium steel and are chrome plated to give additional toughness and longevity. Each socket is a 3/8" drive and range from 24mm to 32mm to allow you to work on a number of different sized fittings. The Flat Faced Socket Set SKT-6 is a great addition to any mechanic's toolbox or home workbench. Features: Material: Tough Chrome Vanadium Steel + Chrome Plated Included Sockets: 6 - 24 mm, 26 mm, 27 mm, 28 mm, 30 mm, 32 mm (27 mm is tapered for improved use on Suntour suspension forks) Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
A commonly used and required mechanics aid, this set of Park Tool sockets is made of shop-grade, tough chrome vanadium steel and is chrome plated for added longevity and durability. With each socket featuring a 3/8" drive, they are brilliantly compatible with Park Tool's Torque Wrenches to help you get the best leverage and grip when loosening and tightening your fitting. The set of six sockets range from 24mm to 32mm, letting you work on a variety of fitting sizes, ideal for whatever job you need to take on. The Flat Faced Socket Set SKT-6 is an essential collection of sockets that no mechanic or tinkerer should be without.
A quick and easy way to remove bearings from press fit type bottom brackets with an inside diameter of 37-41 mm (BB90 BB92 Shimano Press Fit SRAM Press Fit GXP)The BBT-90 works similar to a small head cup remover to safely extract low profile bearings from inside the bottom bracket shell as the tool slides through the shell it expands behind the bearing once the tool is in place the bearing is removed by tapping on the top cap with a hammer such as the Park HMR-3The BBT-90.3 set also includes installation cups to be used in conjunction with the Park Tool HHP-1 2 or 3 Headset Cup Press to quickly and precisely press the bearings into the bottom bracket shell
Key Features: The DT-3i.2 Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results,Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1 and 1-1/8 inch threadless headset systemsUsing a durable steel driver and built-in guide the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every timeThe unique design virtually eliminates pinched fingers
The Park Tool WAG4 Wheel Dishing Gauge. For a wheel to perform properly, it is important for the rim to be centred between the locknuts of the hub, or dished . To check this, and to make precision adjustments, a wheel alignment gauge (also called a dishing tool ) is a must.The WAG4 allows easy checking of the dish on road, mountain, or BMX wheels from 16 to 29 . It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
Park Tool Beam Type 0-14Nm Torque Wrench TW-1.2The Park Tool Beam Type TW-1.2 is a high-quality torque wrench for precise fitting of low-torque bike components, including carbon fibre parts. With a max torque output of 14 Nm, it's ideal for use when tightening bolts on stems, levers and other small component fittings. And it has a 3/8" drive head while being compatible with all Park Tool sockets, bits, and crow feet.Safe and Accurate Beam Type Torque WrenchAn economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fibre components. Plus, it features a 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet.Features: Drive Head: 3/8" Max Torque Reading: 14 Nm Left- and Right-hand thread compatible Ideal for fitting stems, levers and Carbon Fibre components For Low-Torque fittings Compatible with all Park Tool sockets, bits, and crow feetBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a max torque output of 14 Nm, it's ideal for use when tightening bolts on stems, levers and other small component fittings. And it has a 3/8" drive head while being compatible with all Park Tool sockets, bits, and crow feet. Safe and Accurate Beam Type Torque Wrench An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fibre components. Plus, it features a 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet.