Park Tool Professional Travel and Event Kit EK-3 Built for portability and neatly organised in our world-famous Blue Box Tool Case, the Park Tool EK-3 Professional Travel and Event Kit is jam packed with 56 of the finest tools. This makes it the ideal kit for team, event or even the home mechanic. Features:A wide variety of essential tools suitable for a wide variety of modern bikesHigh-quality materialsCan be used for general maintenance, cleaning, repairs and fine-tuningBomb-proof Blue BoxTidy and organised storage with additional pockets, pouches, straps and open space allowing additional tools and parts to be added Contains 56 of Park Tool's most commonly used items: ATD-1.2 Adjustable Torque DriverAWS-1 Three-Way Hex Wrench Set: 4, 5, 6mmBBT-9 Bottom Bracket Tool for 16-Notch External Bearing CupsBBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS DriveBO-2 Bottle OpenerCC-4 Chain CheckerCN-10 Professional Cable and Housing CutterCNW-2 Chainring Nut WrenchCP-1.2 Cassette PliersCT-3.3 Chain ToolCWP-7 Compact Universal Crank PullerDCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mmDSD-2 Derailleur Screwdriver: Cross TipDSD-4 Derailleur Screwdriver: Flat BladeDT-2 Rotor Truing ForkFR-5.2H Cassette Lockring Tool with HandleGSC-1 GearClean BrushHCW-15 36mm/32mm Headset WrenchHMR-8 8oz Shop HammerHT-8 8mm Hex ToolHXS-1.2 Hex Wrench SetLP-7 Utility PliersMLP-1.2 Master Link PliersMW-8 Metric Wrench: 8mmMW-9 Metric Wrench: 9mmMW-10 Metric Wrench: 10mmPAW-12 12" Adjustable WrenchPW-4 Professional Pedal WrenchRR-12 Tape MeasureSW-0 Precision Spoke Wrench: .127"SW-2 Precision Spoke Wrench: .136"SZR-1 Shop ScissorsTL-6.2 Steel Core Tire LeversTWS-1 Torx Compatible Wrench SetUP-SET Utility Pick SetVC-1 Valve Core ToolZP-5 Flush Cut Pliers Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Neatly organised in our world-famous Blue Box Tool Case and built for portability this EK-3 Professional Travel and Event Kit is packed with 56 of our finest tools, allowing hundreds of repair and maintenance tasks to be carried out. Kit Includes ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive BO-2 Bottle Opener CC-4 Chain Checker CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1.2 Cassette Pliers CT-3.3 Chain Tool CWP-7 Compact Universal Crank Puller DCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mm DSD-2 Derailleur Screwdriver: Cross Tip DSD-4 Derailleur Screwdriver: Flat Blade DT-2 Rotor Truing Fork FR-5.2H Cassette Lockring Tool with Handle GSC-1 GearClean™ Brush HCW-15 36mm/32mm Headset Wrench HMR-8 8oz Shop Hammer HT-8 8mm Hex Tool HXS-1.2 Hex Wrench Set LP-7 Utility Pliers MLP-1.2 Master Link Pliers MW-8 Metric Wrench: 8mm MW-9 Metric Wrench: 9mm MW-10 Metric Wrench: 10mm PAW-12 12" Adjustable Wrench PW-4 Professional Pedal Wrench RR-12 Tape Measure SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TL-6.2 Steel Core Tire Levers TWS-1 Torx® Compatible Wrench Set UP-SET Utility Pick Set VC-1 Valve Core Tool ZP-5 Flush Cut Pliers
A professional-level toolset designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in our world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of our best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Includes: ATD-1.2 Adjustable Torque Driver — 4 to 6 Nm AWS-1 3-Way Hex Wrench – 4mm/5mm/6mm BBT-9 Bottom Bracket Tool – 16-Notch 44mm OD BBT-32 Bottom Bracket Tool – 20-Spline BO-2 Bottle Opener CC-4 Chain Checker CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1.2 Cassette Pliers CT-3.3 Chain Tool CWP-7 Compact Universal Crank Puller DCW-1 Double-Ended Cone Wrench – 13mm/14mm (qty. 2) DCW-2 Double-Ended Cone Wrench – 15mm/16mm (qty. 2) DCW-3 Double-Ended Cone Wrench – 17mm/18mm DSD-2 Derailleur Screwdriver DSD-4 Derailleur Screwdriver DT-2 Rotor Truing Fork FR-5.2H Cassette Lockring Tool with Handle GSC-1 GearClean™ Brush HCW-15 Headset Wrench – 32mm/36mm HMR-8 8 oz. Shop Hammer HT-8 8mm Hex Tool HXS-1.2 Professional L-Shaped Hex Wrench Set LP-7 Utility Pliers MLP-1.2 Master Link Pliers MW-8 8mm Metric Wrench MW-9 9mm Metric Wrench MW-10 10mm Metric Wrench PAW-12 12-Inch Adjustable Wrench PW-4 Professional Pedal Wrench RR-12 Tape Measure SW-0 Spoke Wrench SW-2 Spoke Wrench SZR-1 Scissors TL-6.2 Steel Core Tire Levers TWS-1 Torx® Compatible Wrench Set UP-SET Utility Pick Set VC-1 Valve Core Tool ZP-5 Flush Cut Pliers
A precision tool that provides a piloted means of tapping threads in a Bottom bracket shellIncludes English taps 1.370 inch x 24 tpi right hand thread (for adjustable cup) and 1.370 inch x 24 tpi left hand thread (for fixed cup)Italian thread taps 36 mm x 24 tpi right hand thread are also availableAfter tapping the taps act as a guide to allow the facing tool (included) to clean up the faces of the Bottom bracket shell keeping them square with the axleInvaluable top quality tool for every workshop
After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell.
Park Tool Bottom Bracket Tapping+Facing Set BTS-1 The BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. Features:The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693), for the adjustable and fixed cups are available as accessories.Buy Park Tool Bottom Bracket Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Built to withstand the rigours of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the worldStand height and clamp position are firmly secured in place using Park Tools proven lock block system,Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use,The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp, with narrow clamping jaws and a dual-stage cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size,For a complete system, please order either QK130 base or QKFP2 to mount the stand directly to the floor,Features include:Maximum weight capacity: 120lbs. (54kg),Clamp capacity: 0.875 to 3 (22-76mm) diameter tubes, including aero tubes,Clamp jaws are nominally 2.75 (70mm) wide,Clamp height: adjustable from 50 to 62 (128-158cm),Includes #105 Cast Aluminium Work Tray and RPP-1 Repair Stand Post Protector.
Proper frame preparation is very importantThe HTR-1B combines reaming and / or facing of the head tube to create a perfect fit for most sizes of headset cupsThe HTR-1B comes complete with a 33.8 mm reamer and four different size pilots (29.8 mm 30.0 mm 33.8 mm and 36.8 mm)The reamer is used to clean out or increase the diameter of the head tubeMost often facing of the head tube for good cup fit is the objective and no reaming is required in which case the pilots can be used in place of the reamersThe unique quick-release quick-adjust feature allows you to slide the bottom portion on and off easily without the long threading processThis threading function of the tool can still be fine tuned whilst in useThe tapered centring cone unit rides on a bearing for extra smooth operationAll cutting surfaces are top quality and extra sharp
The Park Tool HTR1 Head Tube Reaming and Facing Set allows for proper frame preparation. The HTR1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR1 is the quick-release, quick adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation. All cutting surfaces are top quality and extra sharp.
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.Key Features:Use of the DT-5.2 helps ensure proper disc brake setup and performance.Faces any IS Mount, Post Mount or new Shimano.Flat Mount, including low clearance, chainstay mounts.Telescoping axle adapters allow use with any configuration of open or thru axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles).Precision machined parts.Includes two facing cutters--one for IS mounts and one for Post and Flat Mounts.
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Perfect for facing any thru-axle dropout setup and width, IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 accurately faces front and rear disc mounts to maintain and improve your braking quality. With telescopic axle adaptors for easy and adaptable use, and including a pair of IS Mount, post and Flat Mount cutters within its robust and convenient carry-case, this is a great bit of kit for any workshop or garage.
Key Features: Park Tool have put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle,A perfect way to start or add to your collection of shop quality bicycle tools,Now includes the latest volume of the Big Blue Book, BBB-4,The AK-5 includes a tough toolbox to protect your investment,All tools covered by Park Tool's legendary limited lifetime warranty.
Park Tool Professional Wheel Truing Stand (TS-4.2)Park Tool's TS-4.2 is a pro-level, workshop-quality truing stand that ensures you can get your wheels spinning true with accuracy and hassle-free precision. This new innovative model is compatible with an even wider range of hubs, wheels and tyre sizes. It is built to provide more clearance than ever before and is optimised for faster and easier calibration while being more robust and durable.Compatible with Wheel Sizes from 16" to 29"Ingeniously designed to accurately self-centres virtually any diameter wheel size, this Truing Stand is compatible with wheel sizes from 16” to 29” and gives clearance for tyres widths all the way up to 5” without needing to remove disc brake rotors.Direct-Action Truing Caliper for Precise Wheel CentringIt features precise adjustment while keeping wheels centred thanks to its tall and movable uprights, plus, it also is equipped with direct-action truing calipers. These super-accurate calipers enables you to perfect the performance of the narrowest rims with outstanding accuracy. Also, it's equipped with everything required for the greatest-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptor fittings, and it features removable and replaceable nylon caliper tips to protect painted and anodised rims.Features:Rim Diameter Compatibility: 16" - 29"Hub Width Compatibility (O.L.D.): 75mm to over 250mmTyre Width Compatibility: Up to 5"+Built-in thru-axle adaptorsRemovable, replaceable nylon caliper tips to protect painted/anodized rimsSpeed knob to quickly change axle widthsPlease note, this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Optimised to be more accurate and easier to calibrate and setup, this versatile pro-level truing stand is robust and durable. It’s engineered to accurately self-centre virtually any diameter of wheel size (16" to 29") and any tyre width up to 5"+ without having to remove disc brake rotors. Precise, Accurate and Reliable Professional Wheel Truing Performance Featuring an immensely reliable and long-life construction, this Wheel Truing Stand is built of chrome-plated powder-coated heavy gauge steel and provides flex-free performance. Precisely adjustable and keeps wheels centred with its tall and movable uprights, this immensely accurate design also features direct-action truing calipers. These additional truing calipers allow you to work on the narrowest of rims to the fattest of tyres with superior accuracy with hassle-free functionality. Plus, it is equipped with all the frills you require for the ultimate-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptors, and it's equipped with removable and replaceable nylon caliper tips to protect painted and anodised rims.
Park Tool Team Issue Repair Workstand (PRS-25)Highly adjustable to suit all bike types including those with aero-shaped frames and seatposts, the PRS-25 Team Issue Repair Workstand is ideal for those that work on various bikes and need a stand that packs away easily. The strong hexagon shaped aluminium tubes ensure it gives you the stability you need when making fine adjustments and the 360° rotatable clamp head enables you to access hard to reach areas. Park Tool has been careful to think of all the details with this repair stand, even including soft rubber pads on the clamp to prevent any damage to the bike’s frame or seatpost. This means it’s ideal for home mechanics and busy shop mechanics too.Features:Material: Proprietary "Hexatube" hex-shaped Aluminium tubing ensures low flex and no rotationAluminium leg straps ensure all parts slide, fold and unfold together100-25D Professional Micro-Adjust Clamp quickly clamps and releases nearly any tube from 23-76mm (7/8" to 3"), including aero tubesFully adjustable clamping pressureNarrow clamping jaws (2.7”/7cm) fit into tight areas or on short seatposts360º clamp rotationQuickly and easily folds to 119cm (47")Clamping height adjusts up to 152cm (60")Base when open forms a triangle of 92x92x115cm (36" x 36" x 45")Soft, durable composite rubber clamping padsSaddle cradle provides a perfect spot to temporarily rest a bike by its saddleThree-point leg system creates a stable base on smooth or rough surfacesWeight: 6kg (13 lbs)Please Note: The maximum weight holding capacity of the PRS-25 is 45kg (100 lbs). This assumes the weight is centred over the legs.Buy Park Tool Team Issue Stand - PRS25 from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Park Tool portable bike stand is ideal for riders who love their last minute tweaks before races or sportives. Note: The maximum weight holding capacity of the PRS-25 is 100 lbs. (45kg). This assumes the weight is centered over the legs.
The Park Tool AK-5 Advanced Mechanic Tool Kit is a set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bike. A perfect way to start or add to your collection of shop quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment.A perfect way to start or add to your collection of shop quality bicycle toolsNow includes the latest volume of the Big Blue Book, BBB-4The AK-5 includes a tough toolbox to protect your investmentAll tools covered by Park Tool's legendary limited lifetime warrantyThis tool kit contains the following:AWS-1 3-Way Hex WrenchBBB-4 Big Blue Book of Bicycle Repair 4th EditionCC-4 Chain CheckerCM-5.3 Cyclone Chain ScrubberCN-10 Professional Cable and Housing CutterCNW-2 Chainring Nut WrenchCT-3.3 Chain ToolDCW-1 Double-Ended Cone WrenchDCW-2 Double-Ended Cone WrenchDCW-3 Double-Ended Cone WrenchDH-1 Dummy HubDT-2 Rotor Truing ForkFR-5.2 Cassette Lockring ToolGSC-1 GearClean BrushHCW-16.3 Chain Whip / Pedal WrenchHXS-1.2 Professional L-Shaped Hex Wrench SetMLP-1.2 Master Link PliersPAW-12 12-Inch Adjustable WrenchRR-12 Tape MeasureSD-2 #2 Phillips ScrewdriverSD-3 3mm Flat Blade ScrewdriverSW-0 Spoke WrenchSW-2 Spoke WrenchTL-1.2 Tire Lever SetTWS-3 3-Way Torx Compatible WrenchVC-1 Valve Core Tool