Accurately gauge the straightness of any size disc brake rotor while the wheel is mounted in a TS-2 Professional Wheel Truing StandThe DT-3 features an infinitely adjustable and finely threaded indicator gauge to get perfect results every timeNot compatible with any other wheel truing stand
Park Tool Threadless Saw Guide SG-6The SG-6 Threadless Saw Guide ensures a straight, clean cut on 1", 1-1/8", and 1-1 4" threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksaw blade.The SG-6’s non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.NOTE: SG-6 is intended for use with a steel hacksaw blade.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
It also works great when cutting handlebars or other round tubes from 22mm to 33mm. Simply clamp the SG-6 onto the tube and cut, letting the SG-6 guide the hacksaw blade. The SG-6’s non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.
The perfect tool to remove stubborn freewheelsLong tubular handle for maximum leverageHex shaped end accepts all Park freewheel remover toolsLocking knob holds freewheel tool securelySuper strong investment cast steel
The Park Tool FRW1 Freewheel Remover Wrench securely holds freewheel and lockring tools (FR-1 through FR-8) for removal and installation. Features an investment cast head and a long, round, vinyl dipped handle for superior leverage.
Top quality cable cutters for inner wires and outer casing, including index gear cablesPrecision ground cutting jaws make for a clean cut every timeCold forged and heat treated steel handles for massive strengthDual density moulded grips are contoured for comfort and controlBuilt in crimper for cable end capsForming hole for reforming cable housing and ferrulesA wire latch holds the handles together for storage
The strength of the Park Tool CN10 comes from its heat-treated and cold-forged steel handles, which feel powerful and dependable in your hand. Its precision ground cutting jaws ensure the smoothest and sharpest cut with every bite, making for that level of quality workmanship that Park Tool wants its users to experience. Providing comfort with quality, the handles are covered by dual-density moulded grips. These are contoured for supreme ergonomic control while you cut your inner or outer cables or crimp your end caps with the tool's built-in crimper. Held tightly together when not in use with its wire handle latch, this is a precise and durable cable cutter that any garage or home workshop should not be without.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
Key Features: The DF-1 Dummy Fork is an essential companion for any scenario that requires dropping the fork from a bicycle, enabling complete removal of the fork while keeping the handlebars, headset spacers, and brake caliper organized,The DF-1 installs into the headset and is held in place using the bike's stem,The brake holder features threaded and unthreaded holes for attaching disc brake calipers as well as most rim brake calipers, while the included pad spacer protects hydraulic disc brakes from accidental engagement,The DF-1 is nickel plated and powder coated for long life.
Park Tool Oversized Adjustable Saw Guide SG-7.2 Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75"" (70mm), as well as fork steerer tubes and other round tubes from 1-1/16"" to 1-3/4"" (27mm to 45mm). The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.Features: The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided, one for standard saw blades and one for thicker, carbon specific blades Hardened steel body with moulded contact points to protect tubes and frames Made in the USA and covered by Park Tool's legendary limited lifetime warrantyBuy Park Tool Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
These workshop quality tools are made from chrome vanadium steel making them tough and durable so they last a lifetime of use.
Park Tool Preset Torque Driver (PTD-5)This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-5 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 5 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.
This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components.
It features a complete metal internal construction, ensuring reliability and durability.
The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deepThe guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameterTwo cutting slots are gived, one for standard saw blades and one for thicker, carbon specific bladesHardened steel body with moulded contact points to priotect tubes and frames.
Key Features:Designed and built to install and remove BB30 bearings,The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings into the bottom bracket shell,The included BB30 bearing remover works from inside the shell to easily push out bearings,Updated to also remove PressFit 30 (PF30), EVO 386, BBright-Ö and PF121,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Socket and Bit Set (SBS-1.2)Coming with all the common sized tool heads for getting the job done, Park Tool has created its SBS-1.2 18-piece Socket and Bit Set from a strong and hard-wearing steel so you can rely on it for many years to come. This bike-specific kit also comes in a convenient plastic tray so you can keep all the pieces organised and held together in your toolbox drawer.Features: Material: Chrome Vanadium Steel 3, 4, 5, 6, 8 and 10mm hex bits Long Reach 5 and 6mm hex bits Long Reach T25, T30 and T40 Torx style bits 8, 9, 10, 13, 14, 15mm and 1" sockets (The 1" socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools) Convenient bit and socket holder tray included All sockets and bits are 3/8" drive Sockets Available To Purchase Separately: YesBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Preset Torque Driver PTD-6This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-6 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 6 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.