Search found 928 products for Park Tool

Park Tool PW3 - Pedal Wrench - 15mm And 9-16 inch
  • £24.64
  • RRP £28.99
  • Saving you £15

The Park Tool PW3 Pedal Wrench is made from Cro-Moly steel for a shop quality pedal wrench made to last. 15mm and 9/16 precision openings and a long, round, vinyl dipped handle that won t dig into your hand like flat pedal wrenches.

VIEW ITEM
Park Tool RT2 - Head Cup Remover - 1-1.4 inch - 1-1.2 inch
  • £43.99
  • RRP £49.00
  • Saving you £10

The Park Tool RT2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Strong, heat treated alloy steel with nickel finish.Fits 1-1/4 and 1-1/2 head cups as well as some low profile and internal head cups.

VIEW ITEM
Park Tool SA1 - Park Tool Shop Apron
  • £18.70
  • RRP £22.00
  • Saving you £15

The Park Tool SA1 Shop Apron protects your clothes and gives you the advantage of large pouch pockets whenever you work in the shop. These full-length, shop quality aprons are made of a heavy 7-ounce cotton twill for comfort and durability. Navy blue with white embroidered Park Tool logo.

VIEW ITEM
Park Tool SBC1 - Spoke - Bearing and Cotter Gauge
  • £9.89
  • RRP £10.99
  • Saving you £10

The Park Tool SBC1 Spoke, Bearing and Cotter Gauge is a handy shop aid and is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. Spoke lengths are in both metric and fractional markings. Made of anodized aluminium with embossed markings to allow easy reading and long life.

VIEW ITEM
Park Tool SCW - Shop Cone Wrench - 14mm
  • £8.99
  • RRP £11.99
  • Saving you £25

These Park Tool SCW Shop Cone Wrench Range set the standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.The special Y head design puts more material where it s needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use.

VIEW ITEM
Park Tool SCW - Shop Cone Wrench - 17mm
  • £8.99
  • RRP £11.99
  • Saving you £25

These Park Tool SCW Shop Cone Wrench Range set the standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.The special Y head design puts more material where it s needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use.

VIEW ITEM
Park Tool SCW - Shop Cone Wrench - 22mm
  • £8.99
  • RRP £11.99
  • Saving you £25

These Park Tool SCW Shop Cone Wrench Range set the standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.The special Y head design puts more material where it s needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use.

VIEW ITEM
Park Tool SCW - Shop Cone Wrench - 23mm
  • £8.99
  • RRP £11.99
  • Saving you £25

These Park Tool SCW Shop Cone Wrench Range set the standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.The special Y head design puts more material where it s needed for strength and durability. Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality. Thin enough to use on the narrowest of adjusting cones, the SCW Shop Cone Wrenches have a long, vinyl dipped handle for leverage and comfortable use.

VIEW ITEM
Park Tool Philips and Flat Blade Screwdriver - 1.8 inch - 3.18mm
  • £5.99
  • RRP £7.99
  • Saving you £25

These Park Tool SD series of screwdrivers are shop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.SD-0: No:0 Phillips SD-2: No: 2 PhillipsSD-3: 3mm flat bladeSD-6: 6mm flat blade

VIEW ITEM
Park Tool SG6 - Saw Guide
  • £47.69
  • RRP £52.99
  • Saving you £10

The Park Tool SG6 Saw Guide ensures a straight, clean cut on 1 , 1-1/8 , and 1-1/4 threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksaw blade. The SG-6 s non-scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.

VIEW ITEM
Park Tool SPA2C - Cluster Cone Pin Spanner
  • £8.99
  • RRP £10.99
  • Saving you £18

The Park Tool SPA2C has been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon steel is used on each tool to ensure long life. Handle is vinyl coated to give a good grip. Each Pin Spanner is colour coated for easy recognition.

VIEW ITEM
Park Tool SPK1 - Spork
  • £7.99
  • RRP £10.00
  • Saving you £20

Is it a spoon  Is it a fork It's neither, it's a Spork, no wait that means it's both... That's right, what we see here is years of evolution from the Park Tools cutlery drawer. After having left a spoon in the wrong tray the amorous fork made advances and what we have here is the off-spring, a perfectly formed Spork. Some say it is a spoon with an aggressive bite, others prefer to say it is a fork with a softer side, all we know is that it means that Luke can now have his tea and cake using exactly the same kitchen implement, at least halving his tool carrying weight, and doubling his cake eating abilities.  Ideal for pre race pasta and face interface or just to make tea making a little more aggressive - the options are endless.  Everyone needs a Spork in their life!

VIEW ITEM
Park Tool SR-2.3 Sprocket Remover & Chain Whip
  • £31.99
  • RRP £40.00
  • Saving you £20

This shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette or freewheel.Works on 5-speed to 12-speed mountain and road bike cassettes and freewheelHardened bolts hold securely and make chain replacement easyHeavy duty, heat treated headRound vinyl coated handleThe SR-2.3 is approximately 15" long (38cm)

VIEW ITEM
Park Tool Spoke Wrenches - Black 0.127 inch
  • £6.29
  • RRP £8.99
  • Saving you £30

These Park Tool SW Spoke Tools are professional quality, precision-sized spoke wrenches.They are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of four colours indicating the size at a glance. Park Tool Spoke Wrenches are marked Park Tool USA.

VIEW ITEM
Park Tool Spoke Wrenches - Green 0.130 inch
  • £6.29
  • RRP £8.99
  • Saving you £30

These Park Tool SW Spoke Tools are professional quality, precision-sized spoke wrenches.They are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of four colours indicating the size at a glance. Park Tool Spoke Wrenches are marked Park Tool USA.

VIEW ITEM
Park Tool Spoke Wrenches - Blue 0.156 inch
  • £8.99
  • RRP £10.99
  • Saving you £18

These Park Tool SW Spoke Tools are professional quality, precision-sized spoke wrenches.They are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of four colours indicating the size at a glance. Park Tool Spoke Wrenches are marked Park Tool USA.

VIEW ITEM
Park Tool SW 7.2 Triple Spoke Wrench
  • £8.99
  • RRP £11.99
  • Saving you £25

The Park Tool SW 7.2 Triple Spoke Wrench is a must have for every home mechanic. Updated with a more rounded, smoother shape to fit better in the handMade from nickel plated steel for years of serviceDesigned for the home mechanicCompatible with the three most popular nipple sizes on the market (3.23, 3.30 and 3.45mm). The SW 7.2 is constructed from nickel plated steel to ensure it gives you years of service.

VIEW ITEM
Park Tool SW-9 Double Ended Spoke Wrench
  • £12.79
  • RRP £16.00
  • Saving you £20

Ideal for wheel truing when there s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder. The SW-9 combines two common spoke nipple sizes, 0.127"/3.23mm (SW-0) and 0.136"/3.45mm (SW-2). Forged, machined, heat treated, plated and vinyl dipped for years of dependable use.The SW-9 combines two common spoke nipple sizes, .127 /3.23mm (Park Tool Black SW-0) and 0.136 /3.45mm (Park Tool Red SW-2)Forged, machined, heat treated, plated and vinyl dipped for years of dependable use

VIEW ITEM
"Park Tool SWB-15 3/8" Drive Breaker Bar"
  • £22.94
  • RRP £26.99
  • Saving you £15

The Park Tool 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fastenersMade in the USA and covered by Park Tool's legendary limited lifetime warranty

VIEW ITEM
"Park Tool SWR-8 3/8" Drive Ratchet Handle"
  • £28.04
  • RRP £32.99
  • Saving you £15

The Park Tool SWR-8 is an eight inch (20cm) long ratchet designed to drive any 3/8" drive socket or bit, as well as some Park Tool bottom bracket tools. Forged from alloyed steel and chrome plated for daily use, the SWR-8 is reversible and features a quick-release button to easily switch from one socket to another.Forged from alloyed steel and chrome plated for daily use, the SWR-8 is reversible and features a quick release button to easily switch from one socket to anotherMade in the USA and covered by Park Tool's legendary limited lifetime warranty

VIEW ITEM
expand_less