Park Tool Metric wrench set - 6 7 8 9 10 1112 13 14 15 mmWorld famous Park Tool quality wrapped up in a great set of metric combination wrenchesThe metric wrench set includes 6 to 15 mm 12-point box and open end wrenchesForged from Chrome Vanadium steel then chrome plated meticulously polished and centre dipped in Park Tool blue vinyl for a positive gripStrong comfortable and great value for money
Forged from Chrome Vanadium Steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.
A versatile digital scale built to accurately weigh bikes, frames, and componentsFeatures a unique hexagonal design enabling the scales to be clamped solidly into a repair standAlternatively the scales can be hung from a ceiling hook or branchMeasures in both pounds and kilograms to the tenth and includes a dual position, silicone coated hanging hookRequires three AAA batteries which are not includedMaximum weight limit 25 kg (55 pounds)
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
Uniquely designed to be clamped solidly into a repair stand or hung from a hook or branch.
A versatile digital scale built to accurately weigh bikes frames and componentsFeatures a unique hexagonal design enabling the scales to be clamped solidly into a repair standAlternatively the scales can be hung from a ceiling hook or branchMeasures in both pounds and kilograms to the tenth and includes a dual position silicone coated hanging hook
If you want the strongest, long lasting wheels, then you'll need to have tight and uniform spoke tension, and what better way to ensure they are tight than with the Park Tools TM1 - spoke tension meter Fitting almost any size, shape or material spoke the meter gives you a clear reading of the relative and and absolute spoke tension within a wheel. A must for every serious wheel builder.
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
Park Tool Adjustable Torque Driver (ATD-1.2)Precisely adjust the pressure applied to your components, with this Adjustable Torque Driver from Park Tool. This tool will prevent any unnecessary harm through overtightening. Made from durable metal and including a comfortable handle with exceptional grip, it's an essential item for your workshop. Features:Adjustable: 4, 4.5, 5, 5.5, or 6 Drive: ¼ inch hex driveIncludes: 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Shop quality, adjustable torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components,Adjusts to apply 4, 4.5, 5, 5.5, or 6 Newton Meter (Nm) of torque when rotating clockwise,All metal construction for long life,Comfortable ergonomic composite moulded grip,Includes 3mm, 4mm, 5mm and T25 bits (stored in handle),1 1/4 inch drive,Magnetic socket retains bits,Assembled and calibrated at the Park Tool factory in St. Paul, Minnesota.
Shop quality adjustable torque driver that limits torque applied to fasteners preventing overtightening and damage to lightweight components. Adjusts to apply 4 4.5 5 5.5 or 6 Newton Meter (Nm) of torque when rotating clockwise All metal internal construction for long life Comfortable ergonomic composite molded grip Includes 3mm 4mm 5mm and T25 bits (stored in handle) 1 1/4 inch drive Magnetic socket retains bits Assembled and calibrated at the PARK TOOL factory in St. Paul Minnesota
Fully adjustable to make work on your fasteners and bolts easier, this Park Tool Torque Driver features a metal construction and a comfortable, ergonomic composite moulded grip. The rotating torque gauge on the tool's handle can be turned by hand or by hex for the optimum fastening force. Four magnetic bits (3mm, 4mm, 5mm, and T25) are stored in the tool's handle for easy access, ready for attachment to the driver's socket. An all-metal internal construction, housed in an ergonomic composite material for exceptional grip, makes the Adjustable Torque Driver ATD-1.2 a brilliantly durable and efficient workshop companion.
The Park Tool CRS1 Crown Race Setting System has taken a fresh new approach to crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to set the race in place. The CRS1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS1 set includes one universal setting tube, three 1 inserts, and three 1-1/8 inserts.
The Park Tool DS1 Digital Scale is a versatile digital scale built to accurately weigh bikes, frames, and components. Uniquely designed to be clamped solidly into a repair stand or hung from a hook or branch. Measures in pounds to the ounce and kilograms to the hundredth. Includes a dual position, silicone coated hanging hook. Requires three AAA batteries which are not included. Maximum weight limit 25 kg (55 pounds).
Park Tool Centering Gauge 1554-1As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:The 1554-1 represents a dished rear wheel to assist in centering the TS-2 truing stand The 1554-1 will help align the TS-2 stand, but for accurate work with the TS-2, working with a dishing tool such as the WAG-4 or WAG-5 is recommendedBuy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
Industry standard cone wrenches with unmatched performanceThe Y-head design puts material where it is needed for strength and durabilityMilitary grade phosphate finish ensures an accurate fit and consistent qualityThin enough to be used on the narrowest of conesHigh strength tool steelLong vinyl dipped handle for leverage and comfortIncludes 13 14 15 16 17 18 19 20 21 22 23 24 26 and 28 mm sizesMade in the USA and covered by Park's legendary limited lifetime warranty
Key Features:The 1554-1 represents a dished wheel to assist in centering TS-2, TS-2.2, TS-3, TS-4, or TS-4.2 truing stands,
The P-Handle Torx Compatible Wrench Set from Park Tool is a great versatile Torx wrench set that have been engineered to provide high quality easy to use tools. They have been constructed form high-torque industrial steel for superior performance and durability as you now come to expect from Park Tool.Torx compatible drivers at each endIncludes T6, T8, T10, T15, T20, T25, T30, and T40Comfortable, ergonomically designed nylon handles fit perfectly in your handDurable wall/pegboard mount tool holder allows easy access and organizationIdeal for your workshop or a home mechanic s tool kit this Torx wrench set will give you a perfect fit every time with its two drivers per wrench, a shorter driver on the handle and the longer driver for those hard to reach jobs. The nylon handle has been ergonomically designed to fit perfectly in your hand and provide a secure grip. It also comes with a holder which can be wall or pegboard mounted with easy to read size slots for each tool.