Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet DH Clipless Mountain Bike PedalsIt's easy to see why the Mallet downhill (DH) model is the first choice for multiple professional downhill riders. This is because crankbrothers constructs the body from a bombproof 6061-T6 aluminium, adds stainless steel for the wings and adds forged chromoly (CrMo) axles. The fast-engaging clipless system has a 4-side entry design so you can just stamp your foot in and go, plus its open mud-shedding design prevents dirt build-up. Tough enough to withstand the harshest landings, these high grip, strong and smooth operating pedals are ready to attack the trails.Features: Platform Material: 6061-T6 AluminiumWing's Material: 17-4PH Stainless SteelSpring Material: 300 series Stainless SteelAxle Material: Forged Scandium 435 Chromoly (CrMo)Axle Factor: 57mmAxle Size: Standard 9/16" threadInner Bearing: Type igus LL-glide bearingOuter Bearing: Type enduro cartridge bearingTraction Pins: 8mm adjustableRelease Angle: 15°-20°Cleats: Premium brass cleats with shims includedCleat Type: Shimano Pedalling Dynamics (SPD) typePins: Adjustable pins 8 per sideSpare Pins Included: NoMax Rider Weight: No restrictionWarranty: 5 yearsConcave platform for secure footholdTraction pad technologyCustomisable interfaceRibbed body for better traction when unclippedChamfered edges4-sided entrySuperior mud sheddingCustomisable float & release anglePremium bearings & double seal systemWeight: 479g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clipless MTB PedalsDesigned for competition use but excellent for all-round use, the crankbrothers Candy 7 Clipless MTB Pedals feature a clip mechanism that includes four-sided entry, superior mud shedding ability, and a customisable release angle.Durable Body with Increased Service LifeSpecial attention to detail has been paid to create an especially durable body with chamfered edges to reduce the chance of rock-strikes. The wings and springs of the pedals are made from Stainless Steel to resist corrosion and improve durability. Even the end cap has a bash guard to increase the service life of the pedals.Features: Body Material: 6061-T6 Aluminium Spindle Material: Forged scm 435 CrMo Spring Material: 300 series Stainless Steel Wing Material: 17-4PH Stainless Steel End cap: Hex alloy Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Cleats: Premium Brass cleats with shims included Q-Factor: 52mm Release Angle: 15°/20° Integrated traction pad technology to optimise the shoe/pedal interface Ribbed body for better traction when unclipped Chamfered edges to reduce rock-strikes Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap and bashguard Premium bearings & double seal systemWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.