SPEEDPLAY Zero PedalsBuilt to take on anything, the SPEEDPLAY ZERO road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel dual-sided bike pedal and integrated cleat system offer peak power transfer and exceptional durability. The customized fit and dual-sided entry will allow you to crank on the pedals confidently and comfortably.Cleats are included.Product FeaturesDual-sided entry: No more fumbling, fussing or kicking your pedal over to clip in; step in and take off with ease.Enhanced walkability: The slim cleat profile and rubber texture make walking in your road shoes easier than ever before.Stack height: Best-in-class stack height decreases the amount of material between pedal and shoe for fluid power transfer.3-Axis Cleat Adjustability: The Standard Tension Cleat can be adjusted fore-aft, left-right and rotationally, allowing between 0-15° of float.Rotational free float: With up to 15° of float, the heel can pivot around the pedal for increased foot, lower leg and knee motion, increasing comfort and pedalling efficiency.Superior cornering clearance: The slim profile of the pedal system allows for a great lean angle when negotiating tight corners.Easy tension cleat compatible: Cross cleat compatibility means that you can purchase the easy tension cleats (sold separately) for less resistance when unclipping.Tech SpecsDimensions: 3.9 x 2 x 2Weight: 222g per pairStack Height: 11.5mm (3 holes) 8.5 (4 holes)Q Factor: 53mm (56mm, 59mm and 65mm may be ordered through your local authorized Speedplay dealer)Body Material: GrivorySpindle Material: Stainless SteelBearing Type: Triple Sealed Cartridge & Needle BearingsCornering Clearance: 39°Max Rider Weight: No restrictionCleats: Standard Tension IncludedRelease Angle: Micro Adjustable from 0° to 7.5°Pedal Float: Adjustable from 0° to 15°Cleat Fore-Aft Adjustability: Up to 13mmCleat Left-Right Adjustability: Up to 8mmWalkable Cleat: Yes (adaptor included)In the BoxPedalsCleatsScrewsQuick start guideImportant documentation
Adjustable Float These pedals feature an adjustable free float that can be fine-tuned to ensure you get the correct float movement, which reduces the cycling strain on your knees. Other pedals only allow a pre-set amount of float or no float at all, but the Zero pedals can be adjusted to your personal preference. This helps to ensure you will be comfortable even at the end of the longest days in the saddle, helps to avoid injury and significantly optimises your power output. Dual-Sided Cleat Engagement Another invaluable feature is the dual-sided entry, which means you can just step down on the pedal and go. No more fumbling or looking down to get into the right position, as the cleat’s design and pedal’s shape ensure that you’ll engage quickly and safely without having to stop and think. Maximum Comfort & Performance Unlike traditional cleats, each of the essential foot positioning adjustments can be changed without affecting each other. Three-Way Adjustment ensures you can set up the cleat’s front/rear and side-to-side positions individually and then choose how much float you want. These unique adjustment settings significantly increase comfort and efficiency while dramatically reducing knee strain and fatigue. Cleat Covers Designed for Safer Walking These Zero pedals come with Speedplay's rubberised cleats, which make those off the bike periods less dangerous if your bike's mechanical problem forces an extended walk on the tarmac, or if you feel the need for a coffee stop. Additional Features: · The Zero cleat positions your foot closer to the top of the spindle for improved power transfer · The thin pedal profile lets you power through corners where your rivals coast · Built-in grease port for easy bearing lubrication Technologies: Large, Stable Pedalling Platform: The Zero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat in engaged Quality Without Compromise: Zero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero pedals and cleats are metal-on-metal for durability and safety, unlike competitors who use engagement edges made of plastic True Locking Mechanism: The Zero's locking mechanism does not rely on spring tension for security, so entering and exiting Zero pedals is easy, but unintended release is virtually impossible
Look X-Track En-Rage Plus Titanium MTB PedalsDesigned for daring downhill and enduro dominance, this pair of high-end clip-ins by Look provides a durable build and wide platform to let you tear it up on every trail with aggression and control. Suitable for use with SPD cleats, each aluminium-bodied piece spins on a titanium axle, making for a sturdy and lightweight pedal that can stand up to the most demanding of journeys. With added grip coming in the form of a ribbed body design and optimally-placed pins, these X-Track models are an excellent multi-terrain pick. Features: Body Material: Forged Aluminium Axle Material: Titanium Angular Float: 6° Triggering Force: 6-14Nm Platform Width: 67mm Q-Factor: 57mm Cleat Type: SPD Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FEEL THE NEW X-PERIENCELOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.Technology:THE BEST POWER TO WEIGHT RATIOAll the energy you produce is transferred to your MTB through your pedals. Their roll is, therefore, crucial.LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.The challenge faced by our engineers was, therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight/contact surface ratio on the market.LATERAL CONTACT SUPPORTLateral contact support guides your foot in finding your pedal and provides you with a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.MECHANISM GEOMETRYThe mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.ADJUSTABLE TENSIONAn adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.Key Features:USE: XC Competition and Leisure,TENSION: 6 to 14,BODY: Carbon,SPINDLE: Titanium,FLOAT: 6°,PLATFORM MATERIAL: Chromoly,PLATFORM AREA: 515 mm²,PLATFORM WIDTH: 60 mm,STACK HEIGHT + CLEATS: 16,8 mm,WEIGHT PEDAL: 150 gr,WEIGHT PAIR + CLEATS: 404 gr,GUARRANTY: 2 years.
This Rally Pedal Body conversion Kit means that you only need one power meter with its multiple pedal platform options it takes away the need for a second power meter. The conversion kit offers the option to switch your Rally power meter between road and off-road pedal platforms with ease. By carrying out the home service routine and transfer pedal bodies so you can take your power on and off road with you on different bikes. These conversion kits are also compatible with Vector 3 so that you can run Rally SPD-SL or Rally SPD pedal bodies as an upgrade.
This Rally Pedal Body conversion Kit means that you only need one power meter with its multiple pedal platform options it takes away the need for a second power meter. The conversion kit offers the option to switch your Rally power meter between road and off-road pedal platforms with ease. By carrying out the home service routine and transfer pedal bodies so you can take your power on and off road with you on different bikes. These conversion kits are also compatible with Vector 3 so that you can run Rally SPD-SL or Rally SPD pedal bodies as an upgrade.
The Wolf Tooth Waveform™ Pedals dial in a concave platform and pin design to give a solid and stable pedal. With tapered leading edges and a low-profile design, they will glance off any trail obstacles you encounter with ease.Their concave design will keep your feet firmly in place, while the pedals’ slim build, just 14mm thick and 12.5mm at the centre, will ensure they’re kept close to the axle and over the centre of the pedals to stop them moving about through rough terrain, delivering excellent stability and security through a reduced centre of gravity.The Waveform Pedals are made from strong 6061-T6 aluminium, while the traction pins are made from 304 stainless steel. There are 11 of these 4.5mm long rear loading pins, and together they offer superb shoe hold, locking your feet into the pedals for maximum control. They will stand up to rough use and, in partnership with the slim platform design, will give excellent ground clearance.Wolf Tooth has gone all out with the Waveform, building three bespoke, high precision, low friction bearings and a light plastic Igus bushing, which will require little maintenance, into them. Wolf Tooth has also designed its own custom radial seal, which will keep the muck out for a longer life and a smooth feel from day one.Should you need to replace any of your traction pins, the Waveform™ Pedals come with six handy replacements as standard. They’re also fully serviceable using hex keys, with replacement parts easily available through Wolf Tooth’s “Right to Repair” scheme, and they come with a five-year limited warranty for added peace of mind.Key Features:Perfect for all-mountain use,Available in two sizes,Large at 112mm x 106mm, weight 400g, or small at 105mm x 99mm, weight 380g,Both sizes are 14mm thick, slimming to just 12.5mm in the centre,Platforms made from 6061-T6 aluminium,Dual concavity keeps your feet in place,11 304 stainless steel, rear-loading pins per side, for extra grip,6 spare pins included as standard,Fully serviceable, with ready availability of spare parts.
DMR Vault Mag SL Flat Mountain Bike PedalsEngineered for the demands of mountain bike (MTB) trail-riding, this high-quality pedal features a special magnesium body construction that was born out of DMR's quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die casting technology, its manufacturing process uses less energy, has zero waste and uses magnesium extracted from seawater.Magnesium MTB PedalThis MTB pedal's magnesium body is more than capable of handling all of the intensity that's associated with long days in the mountains. Another highlight is its titanium nitride axle, which keeps the overall weight reduced to only 332g for a pair of these pedals. Tried and tested at pro level, this model comes complete with replaceable steel pins, a high load DU bush system and a 17mm concave footbed, so you can enjoy powerful and dependable pedal stroke performance wherever your next MTB ride takes you.Please Note: Torque setting at the Axle to Crank, for all the DMR Bikes pedal range, is 40 - 55Nm.Features: Body Material: Magnesium Axle Material: Titanium Nitride Finish: ED painted black finish Use: MTB Type: Flat pedal Platform Size: 105x105mm High Load DU bush system 17mm concave footbed Replaceable Steel pins Single or Pair: Pair Rider Weight Limit: 85kg Weight: 332g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Ideal for repairing and saving damaged threads high-end cranks.Includes one set of tap & five helicoil threads in 9/16”x24TPI for right crank arms, as the left crank arms.With one ergonomic handle to use with tap to enlarge the stripped pedal threads on damaged crank arms.One handle with comfortable rubber grip to install the helicoils threads onto the crank arms.One brush for cleaning.One bottle of cutting fluid (2oz. / 60ml.) .
Look X-Track Race Carbon-Titanium MTB PedalsWith a heavy-duty engagement mechanism, the Look X-Track Race Carbon Ti MTB Pedals have been made to handle the abuses of rocks, roots and mud, providing durable, dependable performance in an extremely lightweight, easy-to-use package. The spindle is equipped with a double weather resitant seal to stand up to the worst conditions that you're likely to encounter on the bike and the platform size has been optimised to provide the best power to weight ratio on the market.Features: Body Material: Carbon Spindle Material: Titanium Intended Use: XC competion and leisure Pedal Stack Height: 16.8mm with cleats Platform Width: 60mm Platform Area: 515mm² Tension: 6Nm to 14Nm adjustable spring Cleats: Supplied with cleats Float: 6° Weight: Pedal: 150g; Pair with Cleats: 404gTechnologies:Optimal Power to Weight Ratio: All the energy you produce is transferred to your MTB through your pedals so their role is absolutely crucial. Look’s objective with the X-Track Race Carbon Ti pedals was to find solutions that would enable the most efficient transfer of rider power possible. That is why Look has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by Look's engineers was to identify the zones that are useful for energy transmission and then optimise the pedal design in order to limit any that are unused. This task allowed Look to engineer a pedal with the best weight/contact surface ratio on the market.Lateral Contact Support: Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.Mechanism Geometry: The forces experienced when riding in wet conditions varies greatly compared to riding in the dry but the highest performance is always expected regardless of weather conditons. The mechanism in the Look X-Track Race Carbon Ti pedals works regardless of external conditions and more space allows for the shedding of mud, dirt and grit. These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.Adjustable Spring Tension: An adjustable tension screw allows you to fine-tune the entry/release resistance of the spring mechanism to suit your personal skill level and preferred feel.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Combining a carbon body with a titanium axle, each of these cleat-ready pedals provide a sturdy base for heavy-duty, varied terrain riding. Built to resist impact from rocks and dirt thrown up from the trail floor, these lightweight and smooth-spinning platforms have a specially designed shape and build to ensure the best power-to-weight ratio possible. Suited to the rigours of XC racing, this is the perfect pair for fast-paced and thrilling riding.
The Nukeproof Horizon CL Ti Pedals have been extensively engineered to exact standards and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance, low weight, and now feature an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's designed to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing.Tough and lightweight Titanium axle.Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair).Low profile contoured chassis with optimised leading edge.Side Support Platform.Dual Engagement Mechanism.SPD compatible.Weight: 430g.