V12 Mag PedalsOver 18 years of production, the V12 has become the benchmark for flat pedal performance. DMR has redesigned the classic V12 and made it better than ever.Larger Platform AreaThe new DMR V12 Magnesium [Mg] offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.Lower ProfileAt just 16mm deep, the V12 is as slim as possible whilst retaining that legendary concave feel.Lighter WeightThere is a 20% weight saving from the last V12, with the standard version weighing under 430g per pair and the Magnesium at just 350g.The V12 runs on fully sealed bearings and a CroMo axle. All pins on the pedal are replaceable and tuneable for the preferred grip and feel.Tech SpecsFully sealed bearingsCro-mo axleReplaceable pins350g per pair95x100mm platformPlease note: The maximum torque setting at the axle to crank for all DMR pedals is 40-55Nm.
DMR V12 Pedals BlackOver 18 years of production, the V12 has become the benchmark for flat pedal performance for mountain bikes. This latest iteration is lighter and features a greater surface for outstanding grip and stability. FeaturesLARGER PLATFORM AREA - The new V12 offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.LOWER PROFILE - At just 16mm deep, the V12 is as slim as possible whilst retaining that legendary concave feel.LIGHTER WEIGHT - There is a 20% weight saving from the last V12, with the standard version weighing under 430g per pair.Tech SpecsSealed bearings for improved durabilityCro-Mo axleClassic DMR concave shape offers enhanced sole-to-platform engagement 95x100mm for a more stable basePlease note: Maximum torque setting at the axle to crank for all DMR pedals is 40-55Nm.
The KICKR ROLLR revolutionizes the classic ride feel of rollers, with controlled resistance and front stabilizers for a natural indoor training experience.Kickr Rollr + Powrlink Zero BundleKICKR ROLLR + POWRLINK ZERO Single Sided Bundle available. Accurate to +/- 1%, POWRLINK ZERO’s are built on the cutting edge Speedplay pedal platform. Use the pedals indoor or out, for the most connected training ecosystem.Safety Tyre GripperThe KICKR ROLLR safety tire gripper can hold up to a 2.1” (53mm) tire to keep your bike upright and secure, making it easy to get on and off the bike while providing confidence-inspiring stability, even when sprinting.Connect With Powrlink Zero PedalsConnect Wahoo POWRLINK ZERO power pedals to get the benefits of training with power. ROLLR provides power readings to within +/-1% accuracy of the power meter, allowing you to train with the same precision, indoors and outdoors.Ready To RideSimply attach the Safety Tire Gripper, place your bicycle onto the ROLLR, and get riding. Setting up or switching bikes is simple on KICKR ROLLR, making it perfect for use with multiple bikes.Get the most out of your kickr training experienceTrain With SystmMaximize every Moment with KICKR ROLLR + SYSTM. Design your custom training plans, and ride along On Location Videos for an immersive training experience.Stay ConnectedKICKR ROLLR can receive automatic software updates through the Wahoo Fitness App. The ELEMNT GPS bike computer directly controls KICKR with re-riding outdoor routes, importing planned workouts or setting your target watts.KICKR ROLLR Specifications:Rear Wheel Size: 700cc RoadMax Power: 1500 WattsAccuracy: +/- 1%Dimensions: 39.9” x 11.1”//101 cm x 28 cmWeight: 50 lb // 22.6 kgResistance type: ElectromagneticPower Requirements100-240V~1.5A 50-60 Hz
Look SRM Exakt Dual Power MeterThis top-tier power meter is engineered for improving your performance as it delivers precision, control and constant progression. It features a reliable carbon body construction which gives it a superior strength to weight ratio as you manage the intensity that comes with adrenaline-fuelled road journeys. Look has also kitted this version out with a sturdy CrMo axle for a rock-solid connection to your crankset, so you can maintain a power pedal stroke with every rotation. Bluetooth L.E. and ANT+ Pedal Power MeterDesigned to be incredibly simple to use, this stunning component captures data using a dual-sided power meter design. This means you can measure every detail of your right and left leg performance to improve your training habits and to help you discover your limits and progress. This dual-sided version also has extra features such as Torque Analysis and Balance which records your power output, maximum and minimum pedal stroke as well as your pedal stroke smoothness. Lithium Ion BatteryAll set for the long-haul, this fantastic model is equipped with a high-quality lithium ion battery for a straightforward charging experience. Unlike traditional power meters, this type enables you to charge it without even removing your pedals from your bike. It does this by using a magnetic connector to charge both of your pedals simultaneously to ensure a battery lift of up to 100 hours once complete. This is the ultimate upgrade for riders who want fast and reliable results. Features: Body Material: Carbon Contact Surface Material: Stainless Steel Axle Material: CrMo Use: Road Pedal Type: Clip-in Power Meter Type: Dual-sided Platform Area Size: 400mm² Platform Width: 64mm Q-Factor: 54.6mm Stack Height: 11.9mm Battery Type: Lithium Ion Battery Life: 100H Connectivity: Bluetooth L.E. and ANT+ Part Number: PEXAKT18915 Weight: 310g (approx)Technologies: Designed To Face The Elements: The pedal waterproofness has been the focus of attention thanks to the integration of new components - double seals system on the inside and end cap on the external - which guarantee the water tightness of the axle line. Answering IPX6 / IPX7 * standard, the EXAKT will allow you to face the worst weather conditions. *IPX6 Powerful water jets / 1 minute per square meter for at least 3 minutes Water volume : 100 litres per minute Pressure : 100 kPa at distance of 3 m. IPX7 Immersion, up to 1m depth Test duration : 30 minutes. Progress and Passion: The greatest victories are the fruit of modest details, slight but steady progress. The EXAKT allows you to measure every detail of your performance, to improve your training habits to help you discover your limits and progress constantly. Equipped with dual Bluetooth L.E. and ANT + compatibility, the EXAKT gives you the choice to record, analyse and share your data. Power: Independent of environmental factors, measuring the power output allows to manage your training effectively, to define your training zone and to follow precisely the evolution of your performances. Cadence: It is the number of pedal strokes you make in one minute. In other words, your speed of execution. Combined with the force you apply on the pedals it gives the power output. Torque Analysis: Measuring left and right torque for each pedal stroke to know maximum and minimum values as well as pedal stroke smoothness. Balance: The balance function available on the DUAL version give you separate power from right and left leg. This is a gain of precision on the analysis of your performance. Analyze - Compare - Share: Track your day-to-day activities, set your goals, and drive the evolution of your performance from the measured data. The SRM PC8 allows you to display values such as power, heart rate, speed, distance, location as well as training metrics such as Training Stress Score, Normalized power and Intensity Factor.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Coming equipped with a carbon body construction, this power meter allows you to benefit from its exceptional strength to weight ratio as you clock up the miles on your road bike. Look has also kitted this version out with a sturdy CrMo axle for a rock-solid connection to your crankset, so you can maintain a powerful pedal stroke with every rotation. The EXAKT powermeter is the result of a collaboration between two market leaders: LOOK and SRM. Despite enclosing a state-of-the art electronic system, the pedal remains light with a unit weight of only 155 grams per pedal. The carbon body offers unique stiffness while the 400 mm² stainless steel contact area optimized power transfer. Spring tension can be easily adjusted from 9 to 18. All SRM technological elements are enclosed in the steel axle, which is why sealing was taken very seriously. Integrating an oversize ball bearing and a needle bearing, the axle sports a sealed blue cap on the outside, and a double joint system on the inside. IPX6/7-certified, the EXAKT pedal is fit for the toughest racing conditions. DUAL-SIDED POWERMETER The best power transfer-to-weight ratio on the market today, a stand-out characteristic of the LOOK pedals Powerful, light and reliable: a new generation of miniature electronic components fitted in the center of the pedal body Assembled in France and Germany for proven technical know-how and quality control Analyze and share data by connecting the EXAKT powermeter to your smartphone or cycling computer via Bluetooth Low Energy or ANT+ technology Technologies: Designed To Face The Elements: The pedal waterproofness has been the focus of attention thanks to the integration of new components - double seals system on the inside and end cap on the external - which guarantee the water tightness of the axle line. Answering IPX6 / IPX7 * standard, the EXAKT will allow you to face the worst weather conditions. *IPX6 Powerful water jets / 1 minute per square meter for at least 3 minutes Water volume : 100 litres per minute Pressure : 100 kPa at distance of 3 m. IPX7 Immersion, up to 1m depth Test duration : 30 minutes. Progress and Passion: The greatest victories are the fruit of modest details, slight but steady progress. The EXAKT allows you to measure every detail of your performance, to improve your training habits to help you discover your limits and progress constantly. Equipped with dual Bluetooth L.E. and ANT + compatibility, the EXAKT gives you the choice to record, analyse and share your data. Power: Independent of environmental factors, measuring the power output allows to manage your training effectively, to define your training zone and to follow precisely the evolution of your performances. Cadence: It is the number of pedal strokes you make in one minute. In other words, your speed of execution. Combined with the force you apply on the pedals it gives the power output. Torque Analysis: Measuring left and right torque for each pedal stroke to know maximum and minimum values as well as pedal stroke smoothness. Balance: The balance function available on the DUAL version give you separate power from right and left leg. This is a gain of precision on the analysis of your performance. Analyze - Compare - Share: Track your day-to-day activities, set your goals, and drive the evolution of your performance from the measured data. The SRM PC8 allows you to display values such as power, heart rate, speed, distance, location as well as training metrics such as Training Stress Score®, Normalized® power and Intensity Factor®.
Your next power move starts at your pedals. The Garmin Rally Power Meters are designed to seamlessly transfer between bikes to provide advanced cycling dynamics to help you ride more efficiently and improve over time. Rally dual sensing power meters (RK200, RS200 and XC200) measure total power, cadence, left/right balance and where in the pedal stroke you're applying power. What's more, the transferable spindle can be installed in the pedal body kits to keep cyclists riding year-round.Pedal Design: Features a sleek, pod-less design for improved cornering clearance and stack height for smarter ergonomicsSimple Installation: Installs like any other pedal for easy transfer from 1 bike to another - without bike shop assistancePerformance Metrics: Measures total power at +/-1% accuracy and cadenceEcosystem: Fully integrates with the Garmin ecosystem to allow easy data analysis, software or settings updates via compatible Garmin watches, Edge cycling computers, and Garmin Connect. Leverage the power of Garmin Connect to receive training content and get your data where you want it for analysis on 3rd party platforms such as Strava, TrainingPeaks, and TrainerRoadTransferable Spindle: When the seasons change, you can transfer the spindle to Vector 3 or Rally RS/RK/XC pedal body kits (sold separately)Ant+ and Bluetooth Technology: Connect over ANT+ or Bluetooth to your supporting Garmin watch or Edge device. Also supports connections with your popular indoor training application like Zwift or TrainerRoadBattery Life: Up to 120 hours. Easily replaceable LR44/SR44 (x4) or CR1/3N (x2) batteryWeight: RS200: 320 g / RS100: 328 g / RK200: 326 g / RK100: 334 g / XC200: 444 g / XC100: 451 gStack Height: RS and RK: 12.2 mm / XC: 13.5 mmQ Factor: 53 mm (55 mm with supplied 2mm spacers)Cleat Type: RK: Look Keo Rider Weight Limit: 105kg
Rally™ power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally RS200 features SHIMANO SPD-SL cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke. For single-sensing total power and cadence, check out Rally RS100. These durable pedals install like any other pedals and are easy to transfer between bikes. Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone*, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD-SL cleats,Rally™?RS200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin ConnectTM app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app as well as platforms such as Strava, TrainingPeaks® and TrainerRoad,When the seasons change, you can transfer the spindle between Rally™ RK/Rally XC pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours. *When paired with a?compatible smartphone downloaded with the Garmin Connect appTrainingPeaks is a registered trademark of Peaksware, LLC.
Garmin Rally XC200 MTB Power Meter PedalsOffering you accurate, reliable and instant ride data to help you adapt and improve your pedalling performance, the Rally RK200 Pedal Power Meter builds on the technologies of Garmin’s popular Vector 3 series. As easy to install as normal clipless pedals, they adopt the commonly used Shimano Pedalling Dynamics (SPD) cleat system for compatibility with most mountain bike (MTB) shoes.Left and Right Pedalling AnalysisGarmin's Rally power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally XC200 measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. These durable power meter pedals install like any other pedals and are easy to transfer between bikes. Now you can have power readings whether you ride gravel, cross-country (XC) mountain bike (MTB) or even cyclocross (CX). ANT+ and Bluetooth ConnectivityThe ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more. Features: Rally XC200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase Installs like any other pedal and quickly transfers between bikes Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with Shimano SPD cleats Sleek design provides greater cornering clearance and improved stack height Fully integrates with Garmin cycling ecosystem for data analysis Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter Field calibration Adjustable cleat release tension Axle Size: Standard 9/16" thread Cleat Type: Shimano SPD (cleats included) Battery Type: LR44/SR44 (x4) Battery Life: up to 120 hours (with LR44 battery type) Accuracy: +/- 1.0% Communication: ANT+ and Bluetooth Box Includes: 2x Rally XC200 power pedals, cleats with 6 degrees of float, documentationBuy Garmin Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed especially for off-road riders, the dual-sensing Rally XC200 features SHIMANO SPD cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke.These durable pedals install like any other pedals and are easy to transfer between bikes. Now you can have power whether you ride gravel, cross-country mountain bike or even cyclocross.Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Designed for off-road use, superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD cleats (sold separately),Rally™?XC200 durable dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin Connect™ app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app* as well as platforms such as Strava and TrainingPeaks®,Train indoors by connecting with the Tacx® Training app and additional third-party platforms, including TrainerRoad and more1,When the seasons change, you can transfer the spindle between Rally™ RK/Rally RS pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours .*When paired with your compatible smartphone TrainingPeaks is a registered trademark of Peaksware, LLC.?
Left and Right Pedalling Analysis Designed for road cyclists, this component measures total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. These durable Garmin Rally XC200 pedals install like any other pedals and are easy to transfer between bikes. Now you can have power readings whether you ride gravel, cross-country (XC) mountain bike (MTB) or even cyclocross (CX). ANT+ and Bluetooth Connectivity The ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more. Additional Features: · Sleek design provides greater cornering clearance and improved stack height · Fully integrates with Garmin cycling ecosystem for data analysis · Allows for easy software updates via your Garmin watch, Edge cycling computers or the Garmin ConnectTM app on your compatible smartphone · For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad · When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter
Your next power move starts at your pedals. The Garmin Rally power meters are designed to seamlessly transfer between bikes to provide advanced cycling dynamics to help you ride more efficiently and improve over time. Rally dual sensing power meters (RK200, RS200 and XC200) measure total power, cadence, left/right balance and where in the pedal stroke you're applying power. What's more, the transferable spindle can be installed in the pedal body kits to keep cyclists riding year-round.Pedal Design: Features a sleek, pod-less design for improved cornering clearance and stack height for smarter ergonomicsSimple Installation: Installs like any other pedal for easy transfer from 1 bike to another - without bike shop assistancePerformance Metrics: Measures total power at +/-1% accuracy and cadence. Dual-sensing versions also measure left-right balance and advanced cycling dynamics to show how and where you're producing powerEcosystem: Fully integrates with the Garmin ecosystem to allow easy data analysis, software or settings updates via compatible Garmin watches, Edge cycling computers, and Garmin Connect. Leverage the power of Garmin Connect to receive training content and get your data where you want it for analysis on 3rd party platforms such as Strava, TrainingPeaks, and TrainerRoadTransferable Spindle: When the seasons change, you can transfer the spindle to Vector 3 or Rally RS/RK/XC pedal body kits (sold separately)Ant+ And Bluetooth Technology: Connect over ANT+ or Bluetooth to your supporting Garmin watch or Edge device. Also supports connections with your popular indoor training application like Zwift or TrainerRoadBattery Life: Up to 120 hours. Easily replaceable LR44/SR44 (x4) or CR1/3N (x2) batteryWeight: RS200: 320 g / RS100: 328 g / RK200: 326 g / RK100: 334 g / XC200: 444 g / XC100: 451 gStack Height: RS and RK: 12.2 mm / XC: 13.5 mmQ Factor: 53 mm (55 mm with supplied 2mm spacers)Cleat Type: XC: Shimano SPDRider Weight Limit: 105kg
For a comfortable ride, these components are designed with your favourite LOOK KEO cleats in mind. Left and Right Pedalling Analysis Designed for road cyclists, the dual-sensing Garmin Rally RK200 pedals measure total power, cadence and left/right balance. You can even monitor how you apply power throughout the pedal stroke. Thesy install like any other pedals and are easy to transfer between bikes. ANT+ and Bluetooth Connectivity The ANT+ and Bluetooth technology in these smart pedals enables you to instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone and review later on the Garmin Connect app. View your data on popular applications such as Strava, TrainingPeaks and TrainerRoad for further analysis, sharing and more. Additional Features: · Sleek design provides greater cornering clearance and improved stack height · Fully integrates with Garmin cycling ecosystem for data analysis · Allows for easy software updates via your Garmin watch, Edge cycling computers or the · Garmin ConnectTM app on your compatible smartphone · For post-ride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app as well as platforms such as Strava, TrainingPeaks and TrainerRoad · When the seasons change, you can transfer the spindle between Rally RS/Rally XC pedal body kits (sold separately), which are also compatible with the Vector 3 power meter