Zipp's Service Course SL 70 XPLR help you go faster by placing your body, starting with your hands, in an optimal comfort zone position for hours of rough riding over mixed terrain. Today s riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need.Flared Aluminium adventure & Gravel HandlebarLightweight 7050 Aluminium ConstructionFlared drops with 70mm Reach and short 115mm Drop31.8mm Clamp DiameterWeight From 275gWith technology trickled down from Zipp s Service Course SL range, the Service Course SL 70 XPLR uses the same light and durable 7050 aluminium construction that is both tough and comfortable, giving great comfort over longer rides that can be troublesome with stiffer bars. A superb all-rounder, the Service Course SL 70 XPLR is a modern classic that will grace the front of any gravel or adventure bike in style.
Made for speedy attacks on the track or tarmac, this lightweight and streamlined bar is constructed with an RHM (Rapid Hand Movement) design to give you unparalleled hand comfort, no matter where you hold on. The unidirectional carbon build ensures a stiff and responsive performance as you swoop for the finish line, while strategically-placed cable ports allow you to use advanced shifting systems such as Campagnolo EPS and Shimano Di2. The 130mm drops also provide a supportive and strong spot for your forearms as you take up a lower, more aerodynamic position on your way to the podium.
Fit for both experienced road runners and amateur enthusiasts alike, this triple-butted aluminium bar boasts a comfortable range of reach and drop to make riding upright or with your head down as enjoyable as can be. A 6-degree flare also allows for a more ergonomic elbow and wrist support while riding in the drops. The egg-shaped centre section on top features a full 180-degree roll through into the forward extension, letting your hands find a natural position near the brake hoods and drops, for minimal movement and easy control. A fabulous choice for the fast and focused roadster.
Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Features: Manufactured from UD Carbon with matte clearcoat. Carbon optimized flex for improved small bump compliance. Specification: Built for: XC / Trail. Dimensions: 760mm width, 8° rearward, 5° upward. Rise: 20mm. Weight: 180g. Bar Diameter: 35mm.
Deda Elementi Superzero Carbon HandlebarSpecially designed with a Rapid Hand Movement (RHM) shape, this carbon racing bar is streamlined for a drag-reducing performance when hurtling to the finish line. Equipped with an aero profile and ergonomic grip, riding tall is superbly comfortable and composed, while the 130mm drops provide a dynamic spot when you need to pick up the pace. Stiff and compact for easy handling and kitted out with internal cable ports, the Superzero is primed to steer you to the podium. Features: Material: Carbon UD Shape: RHM - Rapid Hand Movement Diameter: 31.7mm Drop: 130mm Compatibility: Campagnolo EPS - Shimano DI2 cable routing, Full internal cable routing Buy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Box Maximus Handlebars are the first, modern, 31.8, oversize bars designed specifically for BMX racing. When used with the BOX Delta or Hollow, or Promax Banger OS or Impact OS stems (currently the only BMX stems on the market compatible with the Maximus bars), you get the stiffest cockpit available. ###section### Product Specs Width: 28.5" Up Sweep: 2° Backsweep: 7° Bar Clamping Diameter: TBC Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
Ultra-lightweight X Carbon bars are made using the world's best carbon fibre bicycle component technology. Designed for smaller BMX racers, they feature a unique profile that increases stiffness and strength, while keeping the weight low. Please note, the rider weight limit for these bars is 100 lbs. ###section### Product Specs Rise: Multiple Options Width: 21" Up Sweep: 2° Backsweep: 6 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 162g - 3" 182g - 4.5" 285g - 6 ###section### ###shogun-image-section###
3T Ergosum OE Team Stealth HandlebarBenefitting from a high-quality carbon construction, this drop handlebar provides a fantastic combination of stiffness, durability and low weight performance for your road bike. 3T has also kitted out this model with a unidirectional (UD) matte finish for a smooth and stylish appearance as you clock up the miles. Another highlight is this version's 128mm drop and 89mm reach, which delivers comfortable ergonomics for finding your racing position and putting the power down. Weighing in at only 195g (42cm option), this is a great choice of upgrade for road racers who want reliable steering without adding any unnecessary excess weight to their ride.Features: Material: Carbon Finish: Unidirectional (UD) Matte Use: Road Clamp Diameter: 31.8mm Drop: 128mm Reach: 89mm Weight: 195g (42cm option)Technologies: 3T created the Ergosum bend to fit the latest brake-shifter levers. The bends tight radius at the brake lever mounts makes it easy to accurately adjust the reach. Ergosum is shallower than traditional drop bars, with a little more reach.Manufacturer's Part Numbers: 4501AEAN41V Black 42cm 4501AEAM41V Black 40cm 4501AEAO41V Black 44cmBuy 3T Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R1 Road HandlebarThe Cyrano R1 is the mid-range handlebar from fi'zi:k. Made from uni-directional carbon, this is both strong and lightweight.Just as your choice of fi'zi:k Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi'zi:k offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.These products are being ridden at UCI World Tour level by AG2R Pro Cycling Team.The application of The Spine Concept to handlebar shape is the result of fi'zi:k's research with riders of 3 UCI World Tour Teams that were riding fi'zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Handlebar Options:Your shoulders' width should determine your handlebar width. Choose from the following centre-centre measurements: 400/420/440/460mm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop. The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. You are better able to reach further, but perhaps you can't get down quite as low on the handlebar drops as a Snake would be able to.You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop. The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to.You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar drop. Features:Material: Uni-Directional Carbon Flare of Drops: 3 degreesGraphics on both sides to mark where STIs should be placedGraphics on both sides to mark where to finish wrapping bar tape Weight: 205g (size 420mm, centre to centre) Its design is a perfect complement with:-Fizik Cyrano R1 Seatpost.Fizik Cyrano R1 Stem.Buy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R1 Road HandlebarThe Cyrano R1 is the mid-range handlebar from fi'zi:k. Made from uni-directional carbon, this is both strong and lightweight.Just as your choice of fi'zi:k Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi'zi:k offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.These products are being ridden at UCI World Tour level by AG2R Pro Cycling Team.The application of The Spine Concept to handlebar shape is the result of fi'zi:k's research with riders of 3 UCI World Tour Teams that were riding fi'zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Handlebar Options:Your shoulders' width should determine your handlebar width. Choose from the following centre-centre measurements: 400/420/440/460mm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop. The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. You are better able to reach further, but perhaps you can't get down quite as low on the handlebar drops as a Snake would be able to.You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop. The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to.You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar drop. Features:Material: Uni-Directional Carbon Flare of Drops: 3 degreesGraphics on both sides to mark where STIs should be placedGraphics on both sides to mark where to finish wrapping bar tape Weight: 205g (size 420mm, centre to centre) Its design is a perfect complement with:-Fizik Cyrano R1 Seatpost.Fizik Cyrano R1 Stem.Buy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 777 FR Bearclaw Riser HandlebarSpank's collaboration with such a respected pro has resulted in a handlebar that is extremely low in weight, but also has an unprecedented stiffness and durability to ensure it can handle the extreme jumps, flips and drops of Freeriding.Due to the ever increasing demand for wider and lighter bars for more aggressive riding styles, Spank has developed the Dual XGT (Extreme Gradual Taper) technology with Impact Ends. The Spike 777 FR Bearclaw benefits from this Dual XGT technology, which enables extreme precision during manufacture for consistent wall thickness. Spank has optimised the spread of material to counter high stress areas on the bars under extreme use through FEA (Finite Element Analysis) and rigorous real-world testing. The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts.Features: Material: Work-hardened 2-series Alloy (20% stronger than 777 EVO) Diameter: 31.8mm Length: 777mm Upsweep: 4 deg Backsweep: 8 deg Dual XGT Taper Technology with impact ends Reinforced, shot-peened clamp area Weight: 310gBuy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 35 Vibrocore™ Riser HandlebarsThe Oozy 760 LTD Vibrocore Riser Bar is a big and burly Downhill (DH) and Freeride bar that’s stiffer, stronger, and easily absorbs vibration for a smoother journey, no matter what the terrain. These qualities are thanks to the Vibrocore™ injected proprietary foam, help to reduce arm fatigue and hand numbness so you can just concentrate on the path ahead.Features: Material: Zirconium Doped 7-Series Alloy Finish: Shot peen-anodized Width: 820mm Rise: 25° Geometry: 5° Upsweep/8° Backsweep Key Technologies: Vibrocore™, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design Adjustable to 760mm (cut guides at ends of bar) Vibrocore Impulse & Vibration Dampening Core Impact ends Use: Downhill and Freeride Weight: 300gTechnologies:Vibrocore™ Technology: Alloys have a very high density, and in turn transmit vibrational energy very effectively. Vibrocore is a complex, low-density material that fills the core of the handlebar, reducing the frequency, amplitude, and duration of energy waves. Where competitors have been forced to design unwanted flexibility into their bars, Spank's Vibrocore system also acts to reinforce the handlebar from the inside, resulting in a more responsive performance and improved sensitivity. The result is a handlebar that feels incredibly strong and rigid and acts to reduce impulse and vibrational fatigue.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.