The Deda alloy armrests are compatible with Deda extensions and are constructed from a lightweight alloy. Offering multiple mounting positions, they'll help you to obtain the perfect arm/riding position on the bars.
Ritchey Comp Trail Riser HandlebarComing kitted out with a high-quality alloy build that's double-butted for extra strength and durability, this riser handlebar is engineered for the demands of mountain bike (MTB) trail riding. Ritchey has also equipped this model with an 800mm width, 10 degrees of backsweep, and 20mm rise for a comfortable and controlled feel as you weave from trail to trail.Double Butted Alloy MTB Riser BarWith a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the Comp 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning.All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favourite trails from Moab to Houffalize or your local runs, the Ritchey Comp 10D Rizer bar will help deliver a lifetime of great mountain bike experiences.Tom Ritchey has been making off-road mountain bike handlebars for decades, and his designs have not only been a staple on the World Cup cross country circuit but have often dominated it, claiming multiple World Championship titles along the way. A perfect blend of lightweight and strength, Ritchey MTB handlebars intelligently blend low weight, strength and ergonomics to deliver a comfortable ride experience where performance and reliability are critical.Features: Material: Double-butted 6061 Alloy Use: Mountain Bike (MTB) Type: Riser handlebar Width: 800mm Clamp Diameter: 31.8mm Rise: 20mm Backsweep: 10 degrees Bar End Compatible: Yes Weight: 385gManufacturer's Part Number: 30435317029 Black 800mmBuy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prepared for clocking up the miles on your road bike, this sleek drop handlebar boasts a hard-wearing 6061 aluminium build that makes it strong and reliable wherever your next ride takes you. Zipp has also equipped this version with comfortable geometry including seven degrees ramp angle and four degrees outsweep, which allows for smooth and supportive steering as you put the power down. Another highlight is it's clip-on compatible, so you can add clip-on extensions (available separately) for an even greater choice of positioning. Coming complete with an eye-catching finish, this is a great choice of upgrade for performance-focused steering with stylish looks that complement your ride. Aluminium Drop Handlebar with 80mm Reach The Service Course 80 bar provides what today’s riders demand—comfortable and efficient positions on the tops or hoods or that aero and efficient position in the drops. The bar allows a neutral wrist position on the drops and a flat brake hood transition for the athlete even while riding with a more upright position. Drops are angled outward by 4 degrees to reduce wrist strain. Named after its 80mm reach, the bar brings the hoods and control levers back where you want them, while keeping the drops close. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. All of this performance results in greater speed at a price that won’t break your budget. Manufacturer's Part Numbers: ZP8164001 Silver 40cm ZP8164002 Silver 42cm ZP8164003 Silver 44cm ZP8164000 Silver 38cm
Topeak Ridecase Handlebar & Stem MountCompatible with RideCase, SmartPhone DryBag and Topeak Phone Packs. Allow RideCase or SmartPhone DryBag to be used on your another bike.Features:Material: Machined Aluminum/ Engineering Grade Plastic.Added Features: Angle Adjustable Rotates for Landscape or Portrait Viewing. Compatible with all Topeak Phone Packs.Size (L x W x H): 9.6 x 3.2 x 2.4cm/3.8” x 1.3” x 0.9” (stem cap mount).3.2 x 3.2 x 2.4cm/1.3” x 1.3” x 0.9” (handlebar mount adapter).Weight: 48g/1.69oz (stemcap mount).20g/0.70oz (handlebar mount adapter).Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Funn Kingpin Mountain Bike Riser HandlebarThe Kingpin Mountain Bike Riser Bar has been designed with MTB (mountain bike) use in mind as it offers an incredibly lightweight, durable and high-performance as you tackle the toughest trails. Featuring a Supreme 7 alloy build, this riser bar is immensely strong and ideal for riding in rough terrain. Sandblasted Riser BarReady to tame any trail, this robust model also features an ultra-fine sandblasted finish. As a result, you'll enjoy the advantages of its fantigue resistance on longer rides and in all weather conditions.Features:Material: Supreme 7 AlloyFinish: Ultra-fine sandblastedUse: MTBDiameter: 31.8mmWeight: 180gBuy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Butano Gravel Bike HandlebarErgonomically designed to make the most of every multi-surface ride, the 6061 alloy Comp Butano Gravel Bike Handlebar puts you in the perfect position as you explore far off the tarmac. Angled with comfortable geometry in the drops and across the top, finding your optimum riding spot is easy, with the 12-degree drop flare adding an extra level of control when riding in the drops on rough terrain. Dependable and strong for all-out attacks on varied surfaces, the Butano is a reliable choice from Ritchey.Features: Material: 6061 Alloy Stem Clamp Area: 31.8mm Reach: 73mm Drop: 118mm Drop Flare: 12° Top Section Backsweep: 4° Top Section Flare Out: 2° Drop Bend Shape: Compact Top Section Shape: Ergonomic Use: Adventure, Cyclocross (CX), Gravel Lever Compatibility: Standard 23.8mm lever clamps GPS Mount Compatible: Yes Internal Cable Routing: No Clip-On Aero Bar Compatible: Yes Compatible with Shimano EW-RS910 junction box Compatible with Ritchey C260 stem Manufacturer's Part Number: 30335008009 Weight: 295g (42cm)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Ride flat & riser bars offer Race Face engineering & quality at a value price point.Key Features:Manufactured from cold drawn, seamless 6061 material.,Shot peened for increased fatigue life.,Gradual external swaging & internal taper give increased strength & durability without adding weight.,The RIDE flat & riser bars offer Race Face engineering & quality at a value price point..Specification:Colour: Black.,Built For: XC / Trail.,Sweep: 5° rearward, 6° upward.,Bar Diameter: 31.8mm.,Rise: 1".,Weight: 325g.,Width: 710mm..
Allowing you to find your ideal handlebar height, this riser kit allows for 20mm, 40mm or 60mm of height adjustability for your Prime Noosa TT Aero handlebar. 60mm stack height needs the additional span to secure the setup, so you can enjoy superior comfort and control as you clock up the miles. Featuring an immensely tough, forged, and machined alloy body construction, this model is great at handling all the challenges that come with a long day out on the road. Prime has also equipped this version which marine grade steel bolts, so you can enjoy a stable and secure hold on every ride.
Funn G-Wide Gravel Bike HandlebarFunn components has over 20 years of making tough and durable mountain bike components and is now bringing that experience to the cyclocross and gravel riding world. Manufactured from super-strong 6061 triple-butted aluminium, the G-Wide Gravel Handlebar offers an optimized flank angle and 6° of backsweep for better comfort and control when riding on the top or hoods. Plus with their super-wide 25° flare on the drops, they offer maximum stability over loose terrain.Features: Material: AL6061 Triple butted Backsweep: 6° Reach: 110mm Flare Angle: 25° Drop: 130mm Weight: 480mm: 333g; 500mm: 337gBuy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This extended length plastic mount allows you to take full advantage of all the data that your Edge provides. The Edge is out in front of you for easier, heads up positioning and increased safety.
Prime Noosa TT Aero Handlebar Riser Kit Allowing you to find your ideal handlebar height, this riser kit allows for 20mm, 40mm or 60mm of height adjustability for your Prime Noosa TT Aero handlebar. 60mm stack height needs the additional span to secure the setup, so you can enjoy superior comfort and control as you clock up the miles. Featuring an immensely tough, forged, and machined alloy body construction, this model is great at handling all the challenges that come with a long day out on the road. Prime has also equipped this version which marine grade steel bolts, so you can enjoy a stable and secure hold on every ride.Features: Body Material: Forged and machined Alloy Bolt Material: Marine grade Steel Use: TT Compatibility: Prime Noosa TT Aero Handlebar Includes: One riser block and all necessary boltsBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 800 Riser HandlebarsThese hard-wearing Riser Handlebars have been designed with Downhill (DH) riding in mind. Benefiting from a durable alloy construction for a sturdy and responsive handlebar that offers enhanced manoeuvrability. Incredibly versatile, it features cut marks so you can adjust it to 740mm and is finished off with shotpeen anodised finish and Spank decal logos.Features:Material: Magnesium Super Six AlloyDiameter: 31.8mmLength: 800mm (adjustable to 740mm)Upsweep: 4 degreesBacksweep: 8 degreesFinish: Shotpeen anodised, decal logosRise: 15mm; 30mm; 50mmWeight: 340g (15mm); 350g (30mm); 360g (50mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.