The Zero100 Handlebars are just about the most reliable and classic handlebars out on the market today. Made to the same tried and tested RHM shape as their top end Alanera bar, it ensures comfort, and speed of movement, whether you're on the drops or on the flats. The RHM shape is a design that has weathered the ages, and will do so for a long time to come. It features a very shallow drop, which is especially designed for riders with a high out of saddle position. A compact reach makes it perfect for modern brake/gear controls. The patented multi-position Continuous Incremental Radius design overcomes the limitations of the anatomical shapes, which has just one position. These bars feature a drilled entry hole for installation of Di2 bar-end junction box. Key Features: Finish: Black On Black (BoB), Black Anodised,Shape: RHM (Rapid Hand Movement) ,Material: Triple Butted Alloy 7075,Handlebar Dia: 31.7mm,Reach: 75mm,Drop: 130mm,Di2 Compatible,Weight: 248g (42cm outside to outside).
Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Key Features: Manufactured from UD Carbon with matte clearcoat.,Carbon optimized flex for improved small bump compliance.,. Specification: Built for: XC / Trail.,Dimensions: 760mm width, 8° rearward, 5° upward.,Rise: 20mm.,Weight: 180g.,Bar Diameter: 35mm..
Unrivalled lightweight control and durability Oversized 35mm clamping diameter for extra strength Robust, featherweight carbon fibre layup tuned for the perfect balance of stiffness and compliance Rise: 5mm Width: 740mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. This junction A is required to connect the shifters via E-tube wires to the down tube junction wire, 5 Port design specifically for TT setup and 3 port design specifically for drop handlebars.
Staying stiff and responsive through the toughest of terrains, this carbon-built bar has the lightness and strength to deal with the abuse of hardy mountain riding. Measuring 800mm-wide, it comes with staged cutting marks to let you customise its size to suit your own comfort. The 20mm height makes for comfortable hand positioning and precision handling, allowing you to weave and swoop from trail to trail with ease.
The Handlebar-Pack Plus closes the gap between bike trip and bikepacking. This is because the waterproof handlebar bag can be used with all separately available handlebar brackets according to the intended purpose and your personal preference.The outer mesh pockets attached at the side offer you the option of taking an additional bottle or stowing the things you need to access quickly such as keys or smartphone. The tried and proven roll closure allows for easy loading of this practical bag while an integrated zippered pocket keeps the contents well organized on the inside. Once you’ve reached your destination, the shoulder strap with carabiner attachment allows you to conveniently carry the Handlebar-Pack Plus with you. The PVC-free bag made of abrasion-resistant Cordura fabric is of course produced sustainably in Germany.PLEASE NOTE!The handlebar mount is available separately and not included with the bag.Fabric: PS36CHeight: 22cmWidth: 26/32cmDepth: 18cmVolume: 11LWeight: 500gWaterproof handlebar bag with carrying strap,Easy and quick access from the top to the inside of the bag thanks to roll closure with closure hooks,Ideal for mounting on road bike handlebars,2 lateral flexible mesh outer pockets for food or small parts,2 hooks with CamLock closure for compression on the front side,2 compression straps inside the bag,Lightweight, durable PU-coated polyester fabric,Detachable shoulder strap,Flat rear panel,Reflective ORTLIEB logo and reflector in diamond shape 3M Scotchlite,Including integrable mesh inner pocket with zipper: for wallet, snacks, cell phone, keys and small items.
E Thirteen Race 35 HandlebarThis mountain bike (MTB) riser handlebar features a lightweight carbon fibre construction that offers optimal stiffness, strength and an overall low weight. This makes it well-equipped for the demands of racing, as it strikes a balance between durability verses weight, giving you tough and dependable steering performance without any excess grams holding you back. Thanks to this model's nine degrees of backsweep, it's also easier on your wrists in comparison to most traditional handlebar bends, so you can enjoy increased comfort and support. With its five degrees of upsweep, it ensures comfort at all angles for a confident hold as you battle for the finish line. One final highlight is its 20mm rise option weighs in at only 225g, and its 35mm rise option weighs in at 230g, making it a lightweight choice of upgrade for your ride.Features: Material: Carbon Fibre Use: MTB Compatibility: 35mm clamp diameter Rise: Multiple options available to select Backsweep: 9 degrees Upsweep: 5 degrees Width: 800mm standard (760mm minimum width) Weight: 20mm Rise Option: 225g; 35mm Rise Option: 230gManufacturer's Part Numbers: E13HB2005 Black 800x20mm E13HB2006 Black 800x35mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a lightweight carbon fibre build, this MTB riser handlebar uses its engineered carbon layup to deliver optimal stiffness, strength and an overall low weight. This makes it well-equipped for the demands of racing, as it strikes a balance between durability verses weight, giving you tough and dependable steering performance without any excess grams holding you back. Thanks to this model's nine degrees of backsweep, it's also easier on your wrists in comparison to most traditional handlebar bends, so you can enjoy increased comfort and support. With its five degrees of upsweep, it ensures comfort at all angles for a confident hold as you battle for the finish line. One final highlight is its 20mm rise option weighs in at only 225g, and its 35mm rise option weighs in at 230g, making it a lightweight choice of upgrade for your ride. Manufacturer's Part Numbers: E13HB2005 Black 800x20mm E13HB2006 Black 800x35mm
The Handlebar-Pack Plus closes the gap between bike trip and bikepacking. This is because the waterproof handlebar bag can be used with all separately available handlebar brackets according to the intended purpose and your personal preference. The outer mesh pockets attached at the side offer you the option of taking an additional bottle or stowing the things you need to access quickly such as keys or smartphone. The tried and proven roll closure allows for easy loading of this practical bag while an integrated zippered pocket keeps the contents well organized on the inside. Once you’ve reached your destination the shoulder strap with carabiner attachment allows you to conveniently carry the Handlebar-Pack Plus with you. The PVC-free bag made of abrasion-resistant Cordura fabric is of course produced sustainably in Germany. PLEASE NOTE! The handlebar mount is available separately and not included with the bag. Fabric: PS36C Height: 22cm Width: 26/32cm Depth: 18cm Volume: 11L Weight: 500g + Waterproof handlebar bag with carrying strap + Easy and quick access from the top to the inside of the bag thanks to roll closure with closure hooks + Ideal for mounting on road bike handlebars + 2 lateral flexible mesh outer pockets for food or small parts + 2 hooks with CamLock closure for compression on the front side + 2 compression straps inside the bag + Lightweight durable PU-coated polyester fabric + Detachable shoulder strap + Flat rear panel + Reflective ORTLIEB logo and reflector in diamond shape 3M Scotchlite + Including integrable mesh inner pocket with zipper: for wallet snacks cell phone keys and small items
This is Zipp’s innovative all-road handlebar the Service Course SL 70 XPLR. The bar’s moniker XPLR exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle… from paved roads onto gravel mud dirt and even single track. The Service Course SL 70 XPLR help you go faster by placing your body starting with your hands in an optimal “comfort zone” position for hours of rough riding over mixed terrain. Today’s riders demand a few things out of their cockpit whether they are doing a two-hour training ride from home or a 200-mile gravel adventure: comfort control and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops specifically focusing on two crucial metrics—outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. FEATURES Updated distinctive Zipp cosmetics 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops position 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods Ergonomic top with 3° backsweep Matte Black nano blast aluminium Lifetime warranty SPECIFICATIONS MATERIAL (HB) AL-6061 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Bead Blast Black Bright Silver
Identical in alloy and construction to Thomson s Downhill bar, the new Trail bar is 750mm wide with 20mm of rise, 8° of back sweep, and 5° of up sweep. The clamping area is 50mm, allowing a different bend profile for a more compliant ride. The Trail bar gives you a light Aluminium all-around bar for your Mountain Bike.750mm width / 31.8mm7050 Aluminium AlloyVery durable and extremely strongThickened ends from 1.4 to 1.6mmDeveloped by Hydraulic Press FormingLightweightPerfect addition to Thomson's Elite X4 Stem or Direct Mount Stem
The Thomson Elite DH bar is 800mm wide with 20mm of rise, 9° of back sweep, and 5° of upsweep. It s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.800mm width / 31.8mm7050 Aluminium AlloyLong, straight middle sectionThickened ends from 1.4mm to 1.6mmDeveloped by Hydraulic Press FormingLow weight, high fatigue lifePerfect with Thomson Elite X4 or Direct Mount StemsWeight 325gBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground. Bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high. Together with a Thomson stem, this is the best Aluminium cockpit you can get. It s the perfect addition to your Elite X4 Stem or Direct Mount Stem.