Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Although it features drops with a 12-degree flare at the ends for better off-road handling, the Deda Gravel100 RHM bar still boats Deda’s “Rapid Hand Movement” drop shaping. This helps to preserve the brake/shifter lever positions for a more natural hand movement, enhancing your comfort and control. Constructed from tough, yet lightweight triple butted alloy, this bar also features a wide clamping area. This means there’s plenty of room for accessories.
Deda Elementi Gravel100 RHM HandlebarInspired by the design of Deda Elementi’s rider favourite Zero100 road bike model, the Gravel100 RHM Handlebar retains the same drop bar lever positioning but places your hands farther apart for increased control on challenging terrain types. This is thanks to the 12-degree flare on its drops, which ensure you’re ready for anything as your route ahead gets even more challenging. Made from a strong triple butted alloy with a black on black finish, this bar will enhance the looks and performance of any modern gravel or cyclocross (CX) bike.Features:Material: Triple butted alloy 7075 Finish: Black on black (BOB) Drop Shape: Rapid Hand Movement (RHM) Stem Clamp Area Diameter: 31.7mmReach: 75mmDrop: 130mm Drop Flare: 12° Lever Compatibility: Standard 23.8mm drop bar lever clamps Use: Gravel, Cyclocross (CX) Width Measurement: Width measured outside-to-outside at the lever position Aero Bar Compatible: Yes, Deda clip-on bars (eg. Deda Parabolica and fastblack2) GPS Mount attachable: Yes Internal Cable Routing: No Wide centre area for mounting accessories Weight: 260g (42cm)Buy Deda Elementi from Chain Reaction Cycles, the World's Largest Online Bike Store.
With the Gravel100 RHM Handlebars, Deda have used their experience and expertise learnt from the Zero100 RHM handlebars which are just about the most reliable and classic handlebars out on the market today. Made to the same tried and tested RHM shape as their top end Alanera bar, it ensures comfort, and speed of movement, whether you're on the drops or on the flats. To make the handlebars more suitable for gravel and cyclocross racing, the Gravel100 handlebars feature a 12 degree flare at the drops to provide more stability while still preserving the typical drop bar feel. These bars feature a drilled entry hole for installation of Di2 bar-end junction box. Key Features: Shape: RHM (Rapid Hand Movement),Material: Triple Butted Alloy 7075,Handlebar Dia: 31.7mm,Di2 Compatible,Reach: 75mm,Drop: 130mm ,Flare angle: 12deg,Sizes: 40-42-44-46cm (Width measured outside-to-outside at the lever position),Weight: 260g,Finish: Black on Black (BoB),. Note: wide centre area for mounting accessories and Deda clip-on bars
ULTIMATE USE RIP Carbon Mountain Bike HandlebarsThe ULTIMATE USE RIP Carbon Handlebars features a completely flat profile, which makes it ideal for use with the modern geometry that's seen on today's cross country and trail orientated mountain bikes. Constructed using high-quality UD carbon fibre, it offers outstanding strength and stiffness in key areas for precise handling and a small amount of flexibility in other areas for increased comfort. The RIP Carbon bars can also be rotated to offer a 5° drop for a more aggressive riding position.Features: Material: Unidirectional Carbon Fibre Finish: Matt UD carbon Backsweep: 8° Flat or 5mm dropBuy ULTIMATE USE Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
You do not need to compromise with the Rip the 8 degree sweep give the aggressive yet comfortable position for all-day rides or fast XC racing. The bars in are finished in Stealth Matt Black UD Carbon specially designed to have the perfect layup to create strength, stiffness and flexibility to give you the best ride.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.