Wolf Tooth 10 Speed GoatLink Derailleur HangerIf you want to add extra capacity to your Shimano Shadow+ rear mechanism for the ultimate 1x10 speed setup, the Goatlink adaptor is for you. With this carefully machined component installed on your Shimano-equipped mountain bike (MTB), you’ll enjoy better shifting performance and be able to run Wolf Tooth’s Giant Cog (GC) cassette expanders and other brands of larger cassettes.The GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. Made by Lindarets and Wolf Tooth, it re-positions 10-speed Shimano Shadow+ Rear derailleurs to the optimal location when using the GC 40 tooth and GC 42 tooth sprockets.Features: Material: 6061 Aluminium Compatibility: Shimano Shadow+ 10-Speed rear derailleurs (clutch-type only) Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10-Speed Optimised for Wolf Tooth's 40 and 42-tooth GCs and all sizes of Drop-Stop chainrings - but will work with any 11-40T or 11-42T 10-Speed cassette You will never need a longer b-screw with the GoatLink Made in the USA Direct Mount-native frames and SRAM rear derailleurs are not supported Part Numbers: WT10SGLINK Weight: 19g Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Please Also Note: Compatible Shimano Shadow+ 10-speed rear derailleurs (clutch-type only) that have a Direct Mount link (including spacer, if so equipped) or B-pivot knuckle with a thickness of 7.9-8.1mm. Shimano changed to this sometime in 2013. Very early Shadow+ rear derailleurs have a thinner link and are not compatible. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Remote Clamp Conversion KitThis conversion kit allows you to attach a Wolf Tooth Dropper Lever to a Shimano I-Spec brake lever.By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Features: Material: Delrin and Aluminium Use: MTB or Road Compatibility: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu) Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Clamp Conversion KitThe Wolf Tooth Remote Clamp Conversion Kit attaches to bars with a 22.2mm diameter. Featuring delrin and aluminium parts, this kit offers durable and reliable performance alongside your Wolf Tooth ReMote dropper lever (available separately).Features: Material: Delrin and Aluminium Use: MTB Diameter: 22.2mm Type: 22.2mm Flat bar clamp conversion kit Compatibility: Wolf Tooth ReMote seat postTechnologies: Cable clamping bolt is a M4 x 6mm socket head cap screw with an M4 flat washer. Delrin and aluminium parts. For 22.2mm handlebar clamps, attach with 1 NM max (it does not take much!).Manufacturer's Part Number: WTCLMP22KIT Black 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Dropper Remote Clamp Conversion KitThis kit is specifically designed for use with Hope brakes. By attaching the dropper level to a brake caliper, this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means that the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible.Features: Compatibility: Hope brakes Manufacturer's Part Number: WTHOPECONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Remote Light Action Replacement LeverThis replacement lever is specifically developed for use with Wolf Tooth ReMote Light Action dropper seatpost levers. Ideal for replacing the old or lost one on your existing dropper seatpost remote. Genuine Wolf Tooth spare part. Features:Material: 6061 T6 Aluminium Use: MTB Lever Length: 57.1mm Compatibility: Wolf Tooth ReMote Light Action dropper seatpost lever Not Included: Cable and housing Made in the USA Manufacturer's Part Number: WTREMOTELAREPLACEMENTLEVEBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM MatchMaker to I-Spec II Shift MountThe SRAM MatchMaker to I-Spec II Shift Mount is the ideal fitting for attaching your SRAM matchmaker shifters to your Shimano I-Spec II disc brakes. This Shift Mount from Wolf Tooth offers a secure and low-profile fitting with a clean finish for two mount systems that would normally not be compatible.ShiftMounts are adapter mounts that allow you to integrate SRAM Matchmaker shifters with Shimano I-Spec II brakes. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. Designed to work with rear (right side) brakes and shifters.Features: Mount SRAM Matchmaker shifters to your Shimano I-Spec II disc brakes Compatible Shimano Brakes: XTR M9020 XTR M9000 XT M8000 SLX M7000 Deore M6000 Weight: 6gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Remote Replacement Lever, Black.
The Wolf Tooth WT-1 All Conditions Chain Lube is a premium synthetic drivetrain lubricant that lubricates, cleans and protects your bike chain, whether road, gravel or MTB.Designed for optimal drivetrain efficiency in all riding conditions, the Wolf Tooth WT-1 chain lube does away with the need for separate dry chain lube, wet chain lube, chain cleaner and drivetrain treatment – leaving you with a clean, silent and efficient chain.As well as improving the overall mechanical efficiency of your drivetrain, WT-1’s synthetic formula binds so well to your chain that it’ll last three to five times longer than most other chain lubes – giving up to 400 miles between applications.As a drivetrain treatment, WT-1 will push dirt and debris to the surface of the chain, where it can be easily wiped away, leaving long-lasting protection. In fact, after the first few rides using WT-1 chain lube, you’ll see it working as the detergent-like additive gets deep into the chain to displace the grime. Wipe down, reapply and the more you ride, the cleaner and smoother your chain will get.WT-1 can also be used on other moving pieces of the bike, including pulley wheels, hubs, cables, and more. Be sure to wipe away any excess chain lube after applying to other areas of your bike.Key FeaturesCleans, lubricates, and protects chains,Peak performance in all conditions,Optimal choice for complex modern drivetrains,Available in 2.0fl oz (59ml) and 0.5fl oz (15ml) bottles,Easy to use; application takes about 10 minutes,Also works on other places of your bike, including hubs, cables, and pulley wheels.Application ProcessEase of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes about 10 minutes and there is no need to clean your chain before getting started.Here’s how to begin using WT-1 Chain Lube:Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.,Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.,Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.,Wait 5-10 minutes. Pretty simple.,Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.,Ride your bike. Reapply at least once every 400 miles.,
The Wolf Tooth Razer Grips are made from lightweight, low-profile silicone foam – primed for longer adventures and available in striking colourways. Built for those of us who prefer thinner grips and providing a solid alternative to more traditional grips, these are a must-have for your MTB adventures.5mm thick foam gives you balanced comfort whilst the silicone foam maintains just the right level of softness and vibration absorption out on the trails. The tacky texture of the Razer grips makes them perfectly suited to anything from blazing sunshine to torrential rain. Key Features:30mm Installed Diameter Including Handlebar Diameter,100% Proprietary Dual-density Silicone Compound Provides Excellent Vibration Damping And Conforms To Your Hand For Improved Comfort While Maintaining Durability,Tacky Texture Provides Excellent Grip With Or Without Gloves In All Weather Conditions,Includes Bar End Plugs.
Replacement bearings for Wolf Tooth headsets. Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.
These Wolf Tooth chainring bolts come as a pack of four and feature chainring bolts that are made from a rock-solid aluminium construction. This makes them great for holding your single-speed chainring securely in place on your adventures. Compatibility: Any of Wolf Tooth's bolt-on Drop-Stop chainrings with through holes. Works with other brand's single chainrings as well. Manufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NI
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.