The Wolf Tooth Axle Handle Multi-Tool is a stripped-back, portable kit that will enable you to conduct essential road or trailside adjustments and quick fixes.The Axle Handle Multi-Tool comes with a choice of four bits and is hollowed out underneath to create space for two at a time, held securely in place by magnets. An additional hex, with a 5mm Hex End stepped to 6mm closer to the handle, lives permanently within the axle end of the handle.With the help of a receiver nut, this connects the Axle Handle to the any Wolf Tooth axle with a threaded bolt, so that when you need the Wolf Tooth Axle Handle Multi-Tool most it will be right there with you. Please note, the axle is not included with the tool but may be purchased separately.Key Features:Strong, lightweight tool perfect for roadside fixes,Made from 6061-T6 aluminium,Dimensions 10.16cm x 15.24cm,Hex Adapter with 5mm Hex End stepped to 6mm fits into handle and end of axle,Two bits are held inside handle by magnets,Multi-tool comes with choice of four bits,These include double-sided 2.5mm/3mm and 2mm/4mm hexes, T10/T25 Torx-compatible bit, Flat head #3.5/Phillips #2 screwdrivers bit,Receiver nut included to connect Hex Adapter with axle,Axle not included, sold separately,Compatible with threaded Wolf Tooth rear axles and some others with o-rings,Replacement parts available.
The Wolf Tooth Aluminium Single Speed Cog utilises extra tall teeth for reliable chain retention when using a chain tensioner. Fitting perfectly onto any Shimano freehub, this cog is optimised for 9, 10 or 11-speed chains but will work with all chains.Machined in-house at Wolf Tooth's Minnesota HQ from high-grade 7075-T6 aluminium in a variety of vivid colours, this is a great way to add some flair to your beloved single speed.Compatibility:These will fit on any Shimano-type freehub spline (geared or single speed),Designed to work with any chain,Tooth width optimized for 9-,10-, and 11-speed chains.
The Wolf Tooth Echo Lock-On Grips are designed to help you keep a firm hold on your mountain bike handlebars, even over rough terrain or in wild weather conditions. Made from moulded rubber, they’re textured with an alternating pattern that is easy to grasp, with or without gloves. Simply tighten them onto your handlebar with a 3mm hex wrench, and you’re done.Each grip comes with a bar plug to keep out mud and grit, plus a smart anodized aluminium collar, available in a choice of primary colours to match the Wolf Tooth spacers, bottle cage bolts, dropper levers, handlebar plugs and other components that you’ve added over the years. This will lock your handlebars firmly in place, so that they’ll absorb heavy impacts on the trails without budging.These striking, hardy and functional grips will not only look great on your bike and make riding the trails easier and safer, they’re also a great long-term investment. Thanks to Wolf Tooth’s Right to Repair programme, when they finally do show signs of wear, you’ll be able to find the spares you need to have them looking like new in no time. Key features:Made from 20A durometer rubber on a plastic liner,Pattern maximises rider grip,With anodised 6061 aluminium collar in shades to match your Wolf Tooth Components,132mm long, 32mm diameter,Compatible with standard 22.2mm MTB handlebars,Replacement parts available,Kit includes two grips, two lock-on clamps and two bar end plugs.
Make simple repairs while riding with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside bicycle handlebars using an EnCase™ System Storage Sleeve or used as a mainstay on any home workbench.
Wolf Tooth Axle for Fox ForksIdeal for replacing your lost or damaged stock axle, this robust model features a 7075 T6 aluminium construction. This makes it more than capable of handling all the abuse which comes with long rides in the woodland. Unlike similar products, this version uses a captive steel washer under its head to reduce friction on your fork's legs. This protects your expensive forks, transfers more of the tightening torque to clamping load for a stiffer interface and prevents it from sticking. Features: Body Material: 7075 T6 Aluminium Washer Material: Steel Use: MTB Compatibility: Fox forks Diameter: 15mm Tool Interface: 6mm Hex key Torque Specification: 12-15Nm Thread Length: 15mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Axle for Fox ForksIdeal for replacing your lost or damaged stock axle, this robust model features a 7075 T6 aluminium construction. This makes it more than capable of handling all the abuse which comes with long rides in the woodland. Unlike similar products, this version uses a captive steel washer under its head to reduce friction on your fork's legs. This protects your expensive forks, transfers more of the tightening torque to clamping load for a stiffer interface and prevents it from sticking. Features: Body Material: 7075 T6 Aluminium Washer Material: Steel Use: MTB Compatibility: Fox forks Diameter: 15mm Tool Interface: 6mm Hex key Torque Specification: 12-15Nm Thread Length: 15mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Axle for Fox ForksIdeal for replacing your lost or damaged stock axle, this robust model features a 7075 T6 aluminium construction. This makes it more than capable of handling all the abuse which comes with long rides in the woodland. Unlike similar products, this version uses a captive steel washer under its head to reduce friction on your fork's legs. This protects your expensive forks, transfers more of the tightening torque to clamping load for a stiffer interface and prevents it from sticking. Features: Body Material: 7075 T6 Aluminium Washer Material: Steel Use: MTB Compatibility: Fox forks Diameter: 15mm Tool Interface: 6mm Hex key Torque Specification: 12-15Nm Thread Length: 15mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Perfect for replacing your lost or damaged stock axle, this sturdy model features a 7075 T6 aluminium construction. This makes it more than capable of handling all the abuse which comes with long rides in the mountains. Unlike similar products, this version uses a captive steel washer under its head to reduce friction on your fork's legs. This protects your expensive fork's, transfers more of the tightening torque to clamping load for a stiffer interface and prevents it from sticking when you want to remove it.
This kit features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility: 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Part Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI
Wolf Tooth Axle for Fox ForksIdeal for replacing your lost or damaged stock axle, this robust model features a 7075 T6 aluminium construction. This makes it more than capable of handling all the abuse which comes with long rides in the woodland. Unlike similar products, this version uses a captive steel washer under its head to reduce friction on your fork's legs. This protects your expensive forks, transfers more of the tightening torque to clamping load for a stiffer interface and prevents it from sticking. Features: Body Material: 7075 T6 Aluminium Washer Material: Steel Use: MTB Compatibility: Fox forks Diameter: 15mm Tool Interface: 6mm Hex key Torque Specification: 12-15Nm Thread Length: 15mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Anodised Bling KitThis bling kit is designed to elevate your ride's aesthetic by offering a range of colours that match your taste. It features headset spacers, a stem cap, water bottle cage bolts and a stem cap bolt. All of these genuine Wolf Tooth parts are precisely machined from hard-wearing aluminium for maximum hold on your travels. This makes it a great choice of upgrade for adding more style to your bike. Compatibility:1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only. Bolts are for use on water bottle cages only. Never use these aluminium bolts in a structural application. Use the longer stem cap bolt when installing the stem cap Features: Material: 6061-T6 AluminiumMade in the USAKit Inlcudes: 3mm, 5mm, 10mm, & 15mm headset spacers Ultralight stem cap with an integrated 5mm spacer 4 matching Aluminium water bottle cage bolts A black Aluminium stem cap boltPart Numbers: Black: WTBLINGKITBLACK; Blue: WTBLINGKITBLUE; Gold: WTBLINGKITGOLD; Green: WTBLINGKITGREEN; Orange: WTBLINGKITORANGE; Purple: WTBLINGKITPURPLE; Red: WTBLINGKITRED; Silver: WTBLINGKITSILVER; Nickel: WTBLINGKIT_NI Weight: Stem Cap: 12g; Spacers: 3mm: 2g, 5mm: 3g, 10mm: 5g, 15mm: 7g; 4 Cage Bolts: 4gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for simple and seamless drivetrain integration, this ShiftMount adaptor lets you mount your shifter to a specific brake type. This means that you'll benefit from more handlebar space thanks to this model's clever design that easily integrates your brakes and shifters for a clean look. Please note: There are multiple mounting options available for this product. Please select from the menu the mounting option that matches your set-up. Manufacturer's Part Numbers: SHF-MM-IS11 Black SRAM MM - I-Spec II WTSHF22ISII Black 22.2mm I-Spec II WTSHF22ISEV Black 22.2mm I-Spec EV WTSHFISEVMM Black I-Spec EV SRAM MM
Wolf Tooth 11 Speed GoatLink Derailleur HangerIf you want better shifting performance when running larger cassettes with your Shimano SLX, XT OR XTR 11 speed rear derailleur, then the GoatLink Derailleur Hanger from Wolf Tooth is for you. An ideal addition to your 1x11 drivetrain, it will help your mountain bike (MTB) to deliver the clean shifting and power delivery you need for taking on the most technical sections of the trails.This project began with the desire to run 11 Speed Shimano derailleurs and shifters with SRAM 10-42T XD cassettes. Granted the combination can work without modification - but the performance wasn't quite what Wolf Tooth expected from Shimano and SRAM's finest.When used with a 10-42T cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.*Knowing that certain situations call for a range beyond that provided 10-42T or 11-42T cassettes, Wolf Tooth tweaked the GoatLink 11 to also significantly improve Shimano 11 speed rear derailleur performance with extended-range like the Wolf Tooth GCX44 modified 10-44T XX1 or X01 cassette.Features:Material: 6061 AluminiumCompatibility: SLX M700, XT M8000 and XTR M9000 series 11-Speed Shimano rear derailleursSpeed: 11-SpeedIncluded: Stainless Steel boltTorque: 8-10NmMade in the USAOnly mounts to standard derailleur hangersDouble chainrings (2x) are supported and require a long cage (SGS) rear derailleur with no more than a 12T difference in front chainrings (with an 11-46T cassette)Triple chainrings are not supportedDirect Mount native frames and SRAM derailleurs are not supportedManufacturer's Part Number: WT11S44GLINKWeight: 19g*Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Reverb B MTB Dropper Sustain Cable KitThis sustain kit allows you to use your Wolf Tooth ReMote along with your RockShox Reverb B mount seat post. Easy to install, this kit is ideal for riders who want to enjoy improved feedback, increased return speed and reduced leverage from their RockShox Reverb seat post.Features: Fitment: RockShox Reverb B Compatibility: Wolf Tooth ReMote Manufacturer's Part Number: WTSUSTAINBKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.