The Wolf Tooth Waveform™ Pedals dial in a concave platform and pin design to give a solid and stable pedal. With tapered leading edges and a low-profile design, they will glance off any trail obstacles you encounter with ease.Their concave design will keep your feet firmly in place, while the pedals’ slim build, just 14mm thick and 12.5mm at the centre, will ensure they’re kept close to the axle and over the centre of the pedals to stop them moving about through rough terrain, delivering excellent stability and security through a reduced centre of gravity.The Waveform Pedals are made from strong 6061-T6 aluminium, while the traction pins are made from 304 stainless steel. There are 11 of these 4.5mm long rear loading pins, and together they offer superb shoe hold, locking your feet into the pedals for maximum control. They will stand up to rough use and, in partnership with the slim platform design, will give excellent ground clearance.Wolf Tooth has gone all out with the Waveform, building three bespoke, high precision, low friction bearings and a light plastic Igus bushing, which will require little maintenance, into them. Wolf Tooth has also designed its own custom radial seal, which will keep the muck out for a longer life and a smooth feel from day one.Should you need to replace any of your traction pins, the Waveform™ Pedals come with six handy replacements as standard. They’re also fully serviceable using hex keys, with replacement parts easily available through Wolf Tooth’s “Right to Repair” scheme, and they come with a five-year limited warranty for added peace of mind.Key Features:Perfect for all-mountain use,Available in two sizes,Large at 112mm x 106mm, weight 400g, or small at 105mm x 99mm, weight 380g,Both sizes are 14mm thick, slimming to just 12.5mm in the centre,Platforms made from 6061-T6 aluminium,Dual concavity keeps your feet in place,11 304 stainless steel, rear-loading pins per side, for extra grip,6 spare pins included as standard,Fully serviceable, with ready availability of spare parts.
Bikepacking.com 2019 Gear of the yearIn-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase™ System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebars inner diameter.The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tire Plug Multi-tool, and two Storage Sleeves.Hex Bit Wrench Multi-Tool:14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible),Magnets & O-rings keep all parts in place,Ball detent swivel head helps access hard-to-reach places,Handle doubles as breaker bar for extra torque when tool head is bent,Store in handlebar with EnCase Storage Sleeve,Magnet on the bottom of the tool for convenient storage on steel bike stands (or refrigerators),.Chain + Tire Plug Multi-Tool:Compatible with all bicycle chains including 12-speed,Inserter tool and bacon strips plug holes in tubeless tires,Five strips included; refills available (EnCase System Extras),Hardened steel pin for lifetime durability,Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench,.Storage Sleeves:Vibration-damping material and snug fit prevents rattling,Durable precision-machined aluminium end caps,Custom-fit rubber flap can be trimmed to fit in smaller diameter bars,Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately EnCase System Extras),Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars,.Compatibility:Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops.,Works with both carbon and aluminium handlebars.,Minimum internal bar diameter is 17.5mm.,.Technical Specifications:Weight:Bar Kit One: 132g,Hex Bit Wrench Multi-tool: 50g,Chain + Tire Plug Multi-tool: 46g,Storage Sleeves: 36g,.Material:Hex Bit Wrench Multi-Tool: 7075-T6 aluminium, CrV steel,Chain + Tire Plug Multi-Tool: 7075-T6 aluminium, CrMo steel, butyl strips,Storage Sleeves: EPDM rubber, 6061-T6 aluminium.
Wolf Tooth EnCase System Bar Tool KitThis handlebar tool kit offers in-bike storage as well as essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customisable rubber flap that can be cut to meet your handlebar's inner diameter.The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tyre Plug Multi-tool, and two Storage Sleeves.HEX BIT WRENCH MULTI-TOOL- 14 functions (spoke wrench for 0.127" (3.23mm) nipples; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible)- Magnets & O-rings keep all parts in place- Ball detent swivel head helps access hard-to-reach places- Handle doubles as breaker bar for extra torque when tool head is bent - Store in handlebar with EnCase Storage Sleeve- Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators)CHAIN + TYRE PLUG MULTI-TOOL- Compatible with all bicycle chains including 12 speed- Inserter tool and bacon strips plug holes in tubeless tyres- Five strips included; refills available (EnCase System Extras)- Hardened steel pin for lifetime durability- Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit WrenchSTORAGE SLEEVES- Vibration-damping material and snug fit prevents rattling- Durable precision-machined aluminium end caps- Custom fit rubber flap can be trimmed to fit in smaller diameter bars- Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately)- Includes Drop Bar Fit Kit to customise fit for larger-diameter road handlebarsCompatibilityFits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the dropsWorks with both carbon and aluminium handlebarsThe minimum internal bar diameter is 17.5mmKnown incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, BMC RCB01, S-Works Hover CarbonFeatures: Hex Bit Wrench Multi-Tool Material: 7075-T6 Aluminium, CrV Steel Chain + Tyre Plug Multi-Tool Material: 7075-T6 Aluminium, CrMo Steel, Butyl strips Storage Sleeves Material: EPDM Rubber, 6061-T6 Aluminium Handlebar compatibility: Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops Minimum Internal Bar Diameter: 17.5mm Works with both carbon and aluminum handlebars Weight: Bar Kit One: 132g; Hex Bit Wrench Multi-tool: 98mm long 15mm diameter 50g; Chain + Tyre Plug Multi-tool: 102mm long, 15mm diameter 46g; Storage Sleeves: 36gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customisable rubber flap that can be cut to meet your handlebar's inner diameter. The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tyre Plug Multi-tool, and two Storage Sleeves. HEX BIT WRENCH MULTI-TOOL - 14 functions (spoke wrench for 0.127" (3.23mm) nipples; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when tool head is bent - Store in handlebar with EnCase Storage Sleeve - Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators) CHAIN + TYRE PLUG MULTI-TOOL - Compatible with all bicycle chains including 12 speed - Inserter tool and bacon strips plug holes in tubeless tyres - Five strips included; refills available (EnCase System Extras) - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench STORAGE SLEEVES - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminium end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customise fit for larger-diameter road handlebars Compatibility Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops. Works with both carbon and aluminium handlebars. The minimum internal bar diameter is 17.5mm. Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, BMC RCB01, S-Works Hover Carbon
The Wolf Tooth ReMote Sustain Dropper Lever for RockShox Reverb dropper posts simplifies the actuation system, accelerating return speeds, improving tactile feedback and reducing level throw, all for better ride quality.In removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever.The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post.Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Sustain Installation InstructionsCompatibility:Compatible with Rockshox Reverb A2 and B Spec Stealth (internal) routing dropper posts.,NOT compatible with A1 spec Reverbs,NOT compatible with non-Stealth (externally routed hydraulic hose),A2 Spec has no marking at the top of the stanchion and the speed adjuster knob is black (vs Silver for the A1),B Spec has gold "Rockshox" written at the top of the stanchion.Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
The Wolf Tooth Direct Mount Chainring for Cannondale Hollowgram CX and Road Offset is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Cannondale Hollowgram CX and Road Offset cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:This direct mount chainring will replace your existing spider/chainring on Road and CX Cannondale Hollowgram SI & SISL cranks.,These are NOT compatible with Cannondale mountain bike cranksets because the chainline will be too far off from optimal.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline 44mm.
The Wolf Tooth 130 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and designed to work your road or cyclocross bike, the Wolf Tooth 130 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 130 BCD 5 arm cranksets. ,Does not fit on the cranksets for Shimano DA 9000 / Ultegra 6800,Not compatible with Campagnolo CX10/11..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12 speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention.,Sram Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. ,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position..38T important note: The chain may contact the spider arm slightly when using the 38T chainringWe recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring....
The Wolf Tooth 110 BCD Flat Top Cyclocross and Road Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Flat Top Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 110 BCD 5 arm cranksets.,They do not fit on the cranksets for Shimano DA 9000 / Ultegra 6800.,Not compatible with Campagnolo CX10/11.,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position.,Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12-speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Optimal chainline varies - these rings can be mounted in either the big or small ring position on double cranksets. The most common mounting is in the big ring position because of chainstay clearance..
The Wolf Tooth 120 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweakerBred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 120 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings fit any 120 BCD crankset or 4-bolt spider.,For SRAM cranksets you must use the stock M10x.75 bolts with a shoulder on them. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings).,The only other supplier of these M10 x .75 bolts is Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones.,36t is the smallest number of teeth that fits on a 120 BCD.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline - 51mm for 36t and 52mm for 38t (38t is wider for more chainstay clearance).
The Wolf Tooth 110 BCD Asymmetric 4-Bolt Chainring for Shimano Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits 110 BCD Asymmetric 4-bolt cranks,Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700,Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. Click here to see Wolf Tooth's instructions for the modification.,Confirmed modification fit with Dura Ace 9100 Power Meter in size 42t or larger,Mounts in the big ring position of the cranks but is offset inward for perfect chainline.,The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline 47.5mm.
Wolf Tooth Pack Hanger Alignment Tool KitThis thru-axle kit is specifically designed to work on 12mm thru-axle and 5mm quick release bikes. Using this handy tool kit, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This tool is suitable for use on 12mm thru-axle and 5mm quick release bikes. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless Steel Use: MTBIncludes: Thru Axle and Quick Release KitCompatibility: Works on 12mm thru axle and 5mm quick release bikesMade in the USAWeight: 324gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack Hanger Thru Axle Alignment ToolThis thru-axle kit is specifically designed to work on 12mm thru-axle bikes. Using this handy thru-axle tool, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless SteelType: Thru Axle Kit - Works on 12mm thru axle bikesMade in the USAWeight: 297gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Any Race Face Cinch™ System Crankset.,Compatible With Shimano 12-speed Hyperglide+ Chains.
The Wolf Tooth 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810,Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains.
The Wolf Tooth Direct Mount Flattop Chainring for SRAM Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with SRAM Cranks and 12-speed Flattop chains, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
The wolf tooth stainless steel single speed cog utilises extra tall teeth for reliable chain retention when using a chain tensioner. Fitting perfectly onto any shimano freehub, this cog is optimised for 9, 10 or 11-speed chains but will work with all chains.Machined in-house at wolf tooth's Minnesota hq from ultra-durable heated treated and electropolished 416 stainless steel, this is a remarkable exercise in top-tier precision engineering. If you're looking for a single speed cog to outlast all others, this is a sure bet.Compatibility:These will fit on any shimano-type freehub spline (geared or single speed),Designed to work with any chain,Tooth width optimized for 9-,10-, and 11-speed chains.
The Wolf Tooth Elliptical 110 BCD 4 Bolt Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Elliptical design,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,.Compatibility:Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703 or 4700, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. ,Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains,.
The Wolf Tooth Direct Mount Chainring for Cane Creek Titanium eeWing cranks with 12-speed HyperGlide+ Chain is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with 12-speed HyperGlide+ chains, this direct mount chainring means more time riding and less time fumbling with dropped chains. The nickel-plated finish looks stunning and works fantastically with both eeWing and SRAM direct mount cranksets.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Cane Creek eeWing cranksets,SRAM 3 bolt direct mount cranksets,. Compatibility:Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing.
Patented drop-stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at wolf tooth's hq in Minnesota, USA,Beautiful anodised finish,.CompatibilityThese rings fit on the shimano xtr m9000 and m9020 1x or 2x cranksets,Use only the stock shimano xtr chainring bolts (m7),You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including sram eagle),Compatible with all 10-, 11-, and 12-speed chains except shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline - 49 mm for 30-34t and 50 mm for 36t..