Available in a range of colours to match your frame or components colour scheme, the Wolf Tooth bolt-on seatpost clamp has a self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.
Wolf Tooth Seatpost ClampWith its high-quality CNC machined construction and anodised finish, this tough and lightweight seatpost clamp gives that premium touch to finish of your bike. Available in a range of colours to match your frame or components colour scheme, it has Wolftooth’s self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.Features: Material: CNC Machined 6061 Aluminium Clamp Height: 11mm Not compatible with Ibis brand bike framesPlease Note: The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:The wolf tooth trainer caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Simply screw the caps into a wolf tooth 12mm rear thru-axle and get training.,Ideal for winter workouts when you want to stay on top of your game.,*only compatible with wolf tooth rear-axles and do not fit onto santa cruz nomad (2014 - present), hightower (2016 - present), blur (2018 - present).
Machined From 7075-t6 Aluminium At Wolf Tooth's Hq In Minneapolis, Usa, These 1x Chainring Bolts Are Beautifully Crafted To Top-tier Standards. If You're Looking To Adorn Your Bike With Precision Engineered Components Down To Even The Finest Details, These Are An Ideal Choice.
The Wolf Tooth B-Rad Bottle Shift mount is designed to offset a bottle to a more optimal location on your MTB, or simply introduce more mounting options on your road or gravel bike.Commonly, dual suspension frames have awkward bottle mount positions that interfere with the top tube or shock. By shifting the bottle position off centre and tilting it outward, while providing up to 18mm of centreline adjustment, the B-Rad Bottle Shift improves clearance and avoids this problem. On some full suspension bikes, it may not be possible to fit a bottle at all under the frame shock without this offset.Many brackets for mini pumps don’t clear the frame on mountain bikes, but the B-Rad Bottle Shift also offsets pump bracket mounting holes allowing the mounting of mini pumps on most mountain bikes. Key Features: Allows you to move a bottle mount or mini pump mount to the optimal position,Made from aluminium with stainless mounting hardware,Weight 24g,Maximum load 1700g,Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts,Made in the USA.
B-RAD Titanium Bolts are replacement bolts for use with B-RAD bases and mounts. Titanium is known for its high strength-to-weight ratio and corrosion resistance. These bolts are ideal for cyclists who carry cargo on their rides. Use these bolts as an upgrade for the stainless steel bolts that are included with B-RAD bases and mounts.Key FeaturesCompatible with Wolf Tooth B-RAD bases and mounts,Compatible with bikes with standard water bottle cage braze-ons,Max torque: 6 Nm,Wolf Tooth recommends applying a small amount of copper grease to threads before installing.
The Wolf Tooth Alloy Bar End Plugs add a precision engineered flash of colour to your handlebars.Made in the USA and machined from lightweight and durable 6061-T6 aluminium, these beautiful anodised bar end plugs use an expanding wedge to ensure a secure fit, holding grips or tape in place.Thanks to the wedge design, the Wolf Tooth Alloy Bar End Plugs are compatible with most inner bar diameters for both MTB and road bikes.The perfect finishing touch for your bike build, they give a clean, pro look colour-matched to the rest of the Wolf Tooth range of headsets, stem caps, seatpost clamps, bolts and more to tie your whole bike's style together. Key Features: Weight: 17g for a set of two,Alloy plug diameter: 26.6mm,Compatible handlebar inner diameter range: 16mm - 21.5mm,Material: 6061-T6 aluminum cap, black anodized 7075 aluminum bolt, glass-filled nylon expanding wedge,Made in the USA,Tightened with a 3mm hex key (not included). Tighten until snug – do not overtighten.
Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Karv Cam GripsGreat for longer rides, this fantastic duo is equipped with a 6.5mm thickness which reduces hand fatigue and finger numbness. They feature a dual-density silicone compound which provides you with excellent vibration damping. This makes these grips conform to your hand for amazing comfort while maintaining durability. Coming complete with bar end plugs, these are a perfect choice of upgrade for riders who want a more ergonomic set of components with efficient padding. Features: Material: 100% Silicone Use: MTB Profile: Cam Diameter: 32mm Thickness: 6.5mm Length: 135mm Includes: Bar end plugs Weight: 56g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Wolf Tooth Crown Race Installation Tool adapter fits the three common sizes of crown races and allows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. The 30mm fits 1 1/8", the 33mm fits 1 1/4", and 40mm fits 1 1/2". Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminium billet in-house at Wolf Tooth's Minnesota HQ.
The Wolf Tooth 8-Bit Tyre Lever and Rim Dent Remover Multi-tool is a companion tool to the brand’s bestselling 8-Bit Pack Pliers, which reimagines the humble cycling multi-tool into an innovative, slim and multifunctional design.Paired to the 8-Bit Pack Pliers with magnets and pins, the Wolf Tooth 8-Bit Tyre Lever and Rim Dent Remover Multi-tool features a two-ended design for essential roadside or trailside repairs combining ease of use and maximum leverage.At one end, the thin, nylon composite tyre lever is designed to easily slip under the tyre bead – whether you’re running slimline road tyres, wider gravel rubber or full-on knobbies. With a secure hook and ultra-strong construction, it only takes this one tyre lever to wrest tyre from rim.At the other end is a rim dent remover, which is specially shaped to fit over the lip of metal rims and tested for strength and robustness in harsh Minnesota conditions. The dent remover is designed to help you restore metal rims to rideable condition at the trailside in case of a rock or pothole hit that dings your rim.Key Features:Part of the Wolf Tooth 8-Bit tool family,Nylon composite plastic tyre lever,Specially shaped rim dent remover,Secures to the Wolf Tooth 8-Bit Pack Pliers with magnet/pin interface,Created for cyclists by cyclists.
The Wolf Tooth Remote Clamp Conversion Kit allows you to attach a Wolf Tooth Dropper Lever to a specific handlebar diameter or brake lever.By attaching the dropper level to a brake calliper this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means the the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, and SRAM Matchmaker X.The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. The Hope conversion kit is also compatible with Tech3 Hope brakes. Key Features: Conversion kit to fit Wolf Tooth Remote Action Dropper Lever or Remote Light ,Action Dropper Lever to different brake levers and handlebar diameters,22.2mm clamp for flat mtb bars and 31.8mm for drop road bars,Conversion kit for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, SRAM Matchmaker X,Delrin and aluminium parts.
Wolf Tooth Seat Clamps Are Precision-engineered At Wolf Tooth's Hq In Minnesota – Perfectly Aligned Threads And A Consistent Clamping Force Offer A Great Way For You To Care For Your Beloved Frame Whilst Adding A Flash Of Anodised Colour.The M5 Bolt Includes A Spherical Washer Which Meshes Seamlessly With The Cylindrical Barrel Anchor For An Unrivalled Clamp. Constructed From Premium-grade 6061-t6 Aluminium And Weighing Only 20g.
Because details matter when tricking out your bike, don't stack spacers. Buy the right size instead! Introducing the mate to our beautiful stem caps, the Wolf Tooth headset spacers are precision machined right here in Minneapolis. They come in your favourite anodized colour options and in the lengths of 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, and 30mm so you don't have to stack spacers anymore. Length is laser marked on the end so you don't have to guess. Available in a rainbow of colours these are the perfect way to customize your ride.Key Features:Compatibility: 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g,Kit Sizes: 3/5/10/15mm,Material: 6061-T6 Aluminium,Handcrafted By Wolf Tooth In Minneapolis, USA.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Fat Paw Cam GripsReady for off-road pursuits, this stunning duo delivers a unique cam profile which allows you to choose the position which best supports your hand position and riding style. Keeping you in control, their dual-density silicone compound provides effective vibration damping while maintaining durability. Equipped with a boisterous 9.5mm of grip thickness, these reduce hand fatigue and finger numbness which makes them an ideal choice of upgrade for riders with large or gloved hands. Features: Body Material: 100% Silicone Use: MTB Diameter: 36mm Thickness: 9.5mm Length: 135mm Profile: Cam Includes: Bar end plugs Weight: 93g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Manufacturer's Part Number: WTISABCONVKIT Black Option 1 IS-AB WTISEVCONVKIT Black Option 2 IS-EV WTISIICONVKIT Black Option 3 IS-II
This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gear set quiet and slows down component wear. All Conditions Chain Lube WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving the overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance Anywhere As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
Wolf Tooth WT-1 All Conditions Chain Lube - 2ozThe Wolf Tooth WT-1 Chain Lube is a top-quality synthetic lube for use in all riding conditions and is compatible with all chains. This versatile lubricant gives you exceptional drivetrain performance in both wet and dry conditions, keeping your gear shifts smooth, gearset quiet and slows down component wear.All Conditions Chain LubeWT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. Synthetic Lube Ensures Smooth Drivetrain Performance AnywhereAs a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications. Features Cleans, lubricates, and protects chains Peak performance in all conditions Optimal choice for complex modern drivetrains Easy to use Quick to apply Compatible with all chains Also works on other places of your bike, including hubs, cables, and pulley wheelsBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.