A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit as well as a quick-release height adjustment lever for easy secure adjustment. Featuring 18' (460mm) of height adjustment and 360 degrees of clamp rotation positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability with tubular support braces a locking support yoke and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg) which allows for compatibility with virtually all two-wheeled pedal-driven bicycles including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8' to 3' (22mm - 76mm) diameter tubes and seat posts of any shape and material including aero posts and dropper posts Narrow clamping jaws (2.7'/70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39' to 57' (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36' x 36' x 48' (920mm x 920mm x 1210mm) Folds down to 45' x 14.5' (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs
Key Features: The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots,A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters,Combined with our proven bearing press design, the SBK-1 quickly and easily pushes ,the old bearing out of the linkage, and reinstalls the new bearing precisely and squarelyOrganized in a convenient storage case to keep everything in one place,NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
The PRS25 workstand from Part Tool is a fantastic stand for putting up in the corner of the workshop as your "at home" stand or with it's easily foldable legs it is a great stand to have in the van as your trailside mate that is quick to put up and for those pre ride checks or quick fixes.Fully adjustable clamping pressureNarrow clamping jaws (2.7 inches / 7 cm) fit into tight areas or on short seat posts.360 degree clamp rotation
Base for Park Tool PRS2OS Deluxe Double Arm Repair Stand
The Wheel Truing Stand TS-2.3deal for wheel truing up to 29""+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup. Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs, spring-loaded calipers, and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
Park Tool Professional Wheel Truing Stand TS-2.3The Professional Wheel Truing Stand TS-2.3 from Park Tool is a workshop-quality wheel truing stand that is ideal for building bike wheels. Ideal for wheel truing up to 29"+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup.Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason.With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters.The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.Features: Wheel Capacity: Maximum wheel size: Up to 29"+ with or without tyre Maximum Hub Width: 200 mm (7.87") Maximum Rim Width: 102 mm (4") Hub Compatibility: Accommodates quick release and solid axle hubs - also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: Bolt to benchtop - mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center Clamp in vise - base is 76 mm (3") deep Install in TSB-2.2 Truing Stand BaseBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface.Weight Limit: The PRS-4.2-1 and PRS-4.2-2 Deluxe Bench Mount Repair Stands have a 100 lb. (45kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners can handle this amount of weight.Clamping height can be raised from 6.5 (16cm) to 16.25 (41cm) above the bench surfaceIncludes 100-3C Adjustable Linkage Clamp (clamps tubes up to 1-3/8)Clamp rotates 360 degreesHeavy gauge steel tubingChrome plated for durabilityMade in the USA and covered by Park Tool's legendary limited lifetime warranty
A full-featured bicycle workstand designed and built for the home mechanicThe PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment,Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability,The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach,Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair, The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage, Durable, textured powder coat finish, Integrated height-adjustable parts tray, Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), Maximum weight capacity*: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever, Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) ,Folds down to 45 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs,.
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repairIt features 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability,The PCS-9.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-9.3 is the perfect way to upgrade your home shop !, The new PCS-9.3 features: Fully adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Durable textured powder coat finish, Maximum weight capacity: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm), Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm), Folds down to 44 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), QK2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray, Note :The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs, .
A workshop quality repair stand for mounting onto a wall.Key Features:Uses the same 100-3C heavy duty adjustable clamp as the PRS-2OS1 and PRS-3 OS1 deluxe oversize workshop stands.Heavy duty adjustable linkage clamp fits frame tubes up to 1-5/8inches (41 mm).Designed to be wall mounted>Clamp rotates 360 degrees.Mounts easily to any flat surface.Mounting bolts not included.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle
Park Tool Deluxe Wall Mount Repair Stand PRS-4W-2Simple to mount on to posts or walls, the PRS-4W-2 Repair Stand benefits from Park Tool’s renowned quality and easy to use design. Once your bike is held in the clamp, this advanced bike work stand has a rotatable design, so you can position the bike at any angle for accessing hard to reach areas. Ready for frame sizes up to 76mm (3”) in diameter and aero shaped frames, the clamping pressure of the quick release clamp can be carefully adjusted to prevent damage to expensive carbon frames and seatposts. Features: Material: Steel with powder coat finish Clamp Type: 100-3D Grips nearly any tube from 23-76mm (7/8" - 3"), including aero tubes Cam-actuated adjustment system for quick entry, adjustment and exit Fully adjustable clamping pressure prevents damage to thin-walled tubes Narrow clamping jaws (7cm / 2.7") designed to clamp securely yet fit into tight areas or on short seat posts Durable replaceable clamp covers (#1960) Wall mount extends 14cm (5-1/2") from mounting surface, centre of clamp sits 33cm (13") from mounting surface when installed Mounting bolts not included Weight Limit: 45kg / 100lbs Wall Mounting Plate Size: 15x6cm (6" x 2.5") Mounting Hole Sizes: 13mm (0.5") in diameter and 100mm (4") apartManufacturer's Part Number: QKPRS4W2 Weight: 4.5kg (10lbs)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a powder coat finish, the The Park Tool wall mount repair stand is designed to be fitted easily to any post or wall stud, and places the clamp approximately 13 inches from the wall. Note: Mounting bolts not included.
Park Tool PRS4W - Deluxe wall-mount repair stand with 100-3D clampTop quality wall Mounted Repair Stand
Park Tool Adjustable Crown Race Puller CRP-2The CRP-2 from Park Tool is a highly-precise workshop tool for the accurate, simple and safe removal of fork crown races. This fully adjustable and easy to use tool allows for accurate adjustment of the individual blades, which are positioned around the edges of the crown race, once set tight, the crown race can be pulled off efficiently without any risk of damaging the fork. This tool is very versatile and fits around most possible interferences caused by fork top caps and crown protrusions.Features: Material: Steel Compatible Steerer Diameter: 1", 1-1/8", 1-1/4", 1.5 forks - Suspension and Rigid Compatible Steerer Tube Length: 14 to 43cm (5.5 to 17 inches)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Perfect for taking to races and weekend events the PB-1 is a workbench that folds for easy transport and storageFeatures a large 36 x 23 inch work surface (91.5 x 58.5 cm) with specially sized slots holes and ports for holding tools shop towels and lubesHeavy duty steel legs provide a rock solid base for heavy tools and suppliesFolded dimensions: 42.5 x 23 x 7 inches (108 x 58.5 x 18 cm)Optional accessories include PB5 hand truck and DPB7 repair stand and wheel truing stand
A full-featured bicycle workstand designed and built for the home mechanic The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7 /70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable, textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) Folds down to 45 x 14.5 (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the leg.
If room is minimum and having a normal floor stand is out of the question, then how about a wall mounted workstand from Park Tool. Park Tool has developed the PRS4W wall mounting cycle stand that enables the user to securely bolt the stand to any solid wall or post. The PRSW4 is a shop quality stand that is designed to be used day in day out by pro cycle mechanics, what better stand is there for you to pro-up your humble bike shed and turn it into the pro workshop your bike deserves for its weekly pre ride health check.
Introducing the Park Tool 10.3 Deluxe Repair Stand; a full-featured bicycle work stand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 36 kg Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 7.2kg (16lbs)*Please Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centred below the clamp and between the legs.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes*.The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.