Key Features: The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups and adaptors,The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact,Also included are eight installation drifts for pressing bearings into pre-installed cups,Organized in a convenient storage case,Full list of compatible bearing inner/outer diameters found on instructions/parts diagram,NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for useMade in the USA and covered by Park Tool's legendary limited lifetime warranty.
A self-contained set for accurate facing of a Bottom bracket shellSimple to use tool which ensures the seating faces of a bottom bracket shell are parallel which is essential for the smooth running and long life of Bottom brackets especially Shimano HollowTech IIComes with threaded inserts to ensure the tool is in the perfect position for accurate facingA powerful spring keeps the cutter at the ideal pressure for a perfect jobHigh quality cutting head is replaceableUse with plenty of cutting oil for a superior job
Key Features: The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components,Utilizing expanding collets, an extendable shaft and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact,The SHX-1 is compatible with cartridge bearings with inner diameters from 6mm to 32mm, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets,Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed.
A dependable workstand for the home mechanic with a deluxe clampWorking height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors
A self-contained set for accurate facing of a Bottom bracket shellSimple to use tool which ensures the seating faces of a bottom bracket shell are parallel which is essential for the smooth running and long life of Bottom brackets especially Shimano HollowTech IIComes with threaded inserts to ensure the tool is in the perfect position for accurate facingA powerful spring keeps the cutter at the ideal pressure for a perfect jobHigh quality cutting head is replaceableUse with plenty of cutting oil for a superior job
Features:A self-contained set for accurate facing of a bottom bracket shell.Simple to use tool which ensures the seating faces of a bottom bracket shell are parallel, which is essential for the smooth running and long life of bottom brackets, especially Shimano HollowTech II.Comes with threaded inserts to ensure the tool is in the perfect position for accurate facing.A powerful spring keeps the cutter at the ideal pressure for a perfect job.High quality cutting head is replaceable.Use with plenty of cutting oil for a superior job.Made in the USA and covered by Park's legendary limited lifetime warranty
Features:A dependable workstand for the home mechanic with a deluxe clamp.Uses the 100-5D Professional Micro-Adjust Clamp.Heavy duty micro-adjustable linkage clamp fits frame tubes up to 3 inches (76 mm) .Working height of clamp adjusts from 53 to 67 inches (34 to 170 cm) .Infinite 360 degree rotation of clamp head for perfect positioning.Tapered rotational locking system.Folds flat for easy storage.Constructed of powder coated steel tubing for durability.Rubber feet are adjustable for uneven floors.Covered by Park's legendary limited lifetime warranty
A dependable workstand for the home mechanic with a deluxe clampUses the 100-5D Professional Micro-Adjust ClampHeavy duty micro-adjustable linkage clamp fits frame tubes up to 3 inches (76 mm)Working height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors
Park Tool Team Issue Repair Workstand PRS-22.2The PRS 22.2 Team Issue Repair Stand from Park Tool has been updated with a super-smooth and solid rotation system! It was designed originally for professional Pro Tour mechanics, to mount bikes for maintenance without clamping the frame, the bike is held in place by supporting the bottom bracket then locking either the front or rear dropouts. This stand functions perfectly with any modern axle standard, including Quick Release and every size of Thru-Axle without the need for adaptors. It is perfect for general cleaning and repair work, and it features a sturdy and solid tripod base, which folds compactly for storage; this stand is the mechanics ultimate partner.Features:Material: 6063 T6 lightweight Aluminium Adjustable BB Height: 76cm to 114cm Horizontal Rotation: 360° Main Beam Adjustment: Fore & Aft for optimised balance points Easily transported in the BAG-20 (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Originally perfected for Pro Tour mechanics, the PRS 22.2 Team Issue Repair Stand helps to mount bikes that are in need of essential maintenance. The solid rotation system allows you to approach your pride and joy from all angles and the fact it can function with any modern axle standard (including quick release and every size of thru-angle) ensures there is no need for adaptors. Extremely sturdy and sporting a solid tripod base, this Team Issue Repair Stand is the mechanics ultimate tool for applying that all-important fix to the bike. Should space be an issue, it also folds compactly.
We started from the ground up to create what we believe is the finest folding stand available. Lightweight stable and packed with features100-25D Professional Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8 inches to 3 inches (23-76 mm) including aero tubesFully adjustable clamping pressureNarrow clamping jaws (2.7 inches / 7 cm) fit into tight areas or on short seat posts360 degree clamp rotationSoft durable composite rubberclamping padsSaddle cradle provides a perfect spot to temporarily rest a bike by its saddleThree-point leg system creates a stable base on smooth or rough surfacesQuickly and easily folds to 47 inchesClamping height adjusts up to 60 inchesProprietary Hexatude hex-shaped aluminium tubing ensures low flex and no rotationAluminium leg straps ensure all parts slide fold and unfold togetherWeighs just 13 pounds (6 kg)
A dependable workstand for the home mechanic with a deluxe clampWorking height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life
Features:Base for Park Tool PRS-33 power lift stand.The height and heft of the PRS-33 requires a whole different level of base support and this forged slab will keep you stable during even the most vigorous wrenching.Drilled specifically for the PRS-33 the 135-33 features threaded height adjusters at each corner for perfect stability on uneven surfaces.Made in a the USA with Park's usual lifetime warranty, if you break this we'll want to know how! .
The PCS4 workstand is a great addition to any keen cyclist or mountain biker's workshop that folds away when you need the space to bring the car into the garage or build that canoe you have always wished for. The PCS-4 is a heavy duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock solid, four-point leg system that folds together for storage, steel powder coated tubing, and a composite horizontal tube.
A workstand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The Home Mechanic Deluxe Workstand PCS10.3 was designed and built using Park Tool's 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, this model of the Park Tool PCS 10 also folds easily for transport or storage. Adjustable, Stable and Convenient Bike Workstand World-famous Park Tool cam-actuated, micro-adjustable clamp that allows quick entry and exit and fits 1" to 3" (25mm–76mm) diameter tubes and seat posts of any shape and material. It features narrow clamping jaws (2.7"/7cm) that fit into tight areas or on short seat posts. This stand's mounting clamp has a 360° infinite clamp rotation that allows the bike to be placed in the optimal position for specific repairs. It features an all-steel structure for maximum stiffness and durability. It's also engineered with teardrop-shaped tubing that adds strength and ensures perfect positioning during use and when folded for storage. In addition, it folds quickly and easily to 43" for storage using aluminium quick-release mechanisms and strong tubular support braces. Additional Item Top Features: Maximum Weight Capacity*: 36 kg (80 lbs.) *NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.
Park Tool Home Mechanic Deluxe Workstand PCS10.3The Home Mechanic Deluxe Workstand PCS10.3 from Park Tool is the ideal repair stand for holding your bike stable when tuning, tooling and optimising your bikes performance.Workshop Quality Bike Repair StandA work stand is the backbone of any shop. Holding the bike at a convenient working height allows easy access for adjustments, cleaning and repair. The PCS-10.3 Deluxe Home Mechanic Repair Stand was designed and built using Park Tool's 50 years of experience creating professional shop stands used in shops around the world. The unique three-point leg system and stout adjustable uprights create an extremely solid platform capable of handling bikes up to 80 lbs. (36kg). Easy to set up and use in a home shop, the PCS-10.3 also folds easily for transport or storage. Adjustable, Stable and Convenient Bike WorkstandWorld-famous Park Tool cam-actuated, micro-adjustable clamp that allows quick entry and exit and fits 1" to 3" (25mm-76mm) diameter tubes and seat posts of any shape and material. It features narrow clamping jaws (2.7"/7cm) that fit into tight areas or on short seat posts. Plus, its mounting clamp has a 360° infinite clamp rotation that allows the bike to be placed in the optimal position for specific repairs. It features an all-steel structure for maximum stiffness and durability. Also, it's engineered with teardrop-shaped tubing that adds strength and ensures perfect positioning during use and when folded for storage. And, it folds quickly and easily to 43" for storage using aluminium quick-release mechanisms and strong tubular support braces. Features: Quick-release height adjustment from 39" to 57" (99cm-145cm) Durable textured powder coat finish Super-strong glass-filled nylon composite fittings and top tube internals creating smooth rotation and secure positioning Includes height adjustable compact tray to hold small parts, a few tools and the PTH-1 Paper Towel Holder (optional accessory) Base when open forms a triangle of 36" x 36" x 48" (92cm x 92cm x 121cm) Maximum Weight Capacity*: 36 kg (80 lbs.) *NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs Weight: 17 lbs. (7.71kg)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs.Key Features:Quick release design for fast tool installation and removal.Includes two bearing presses and precision machined aluminum pilots, bushings and spacers.Works with more than 20 different cartridge bearing sizes and multiple axle configurations.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Features:We started from the ground up literally to create what we believe is the finest folding stand available. Lightweight, stable and packed with features.100-25D Professional Micro Adjust Clamp quickly clamps and releases nearly any tube from 7/8 inches to 3 inches (23-76 mm), including aero tubes.Fully adjustable clamping pressure.Narrow clamping jaws (2.7 inches/7 cm) fit into tight areas or on short seat posts.360 degree clamp rotation.Soft, durable composite rubber clamping pads.Saddle cradle gives a perfect spot to temporarily rest a bike by its saddle.Three-point leg system creates a stable base on smooth or rough surfaces.Quickly and easily folds to 47 inches.Clamping height adjusts up to 60 inches.Proprietary Hexatude hex-shaped aluminium tubing ensures low flex and no rotation.Aluminium leg straps ensure all parts slide, fold and unfold together.Weighs just 13 pounds (6 kg) .Made in the USA and covered by Park's legendary limited lifetime warranty
Height adjustment from 55-inches to 72-inches (1.4m to 1.8m) allow a comfortable working height for any mechanic even when clamping on the seat post of the bike.Quick-adjusting clamp that fits frame tubes from 7/8' (22mm) to 1 5/8' (41mm) diameter….Infinite 360 degree rotation of clamp headQuality constructionTapered rotational locking systemFolds easily for storageConstructed of heavy steel tubing and powder coated for durabilityRubber feet are adjustable for uneven floorsLeg stabilising system creats a solid base that resists tipping.