These Park Tool SD0, SD2, SD3, SD6 Screwdrivers are shop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.SD-0: No:0 Phillips SD-2: No: 2 PhillipsSD-3: 3mm flat bladeSD-6: 6mm flat blade
The Park Tool SPA6C uses hardened, replaceable pins. Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any hanger cup.
The Park Tool PP1 Hydraulic Brake Piston Press has a unique shape perfect for compressing the hydraulic piston by pushing the brake pads apart to speed up servicing and pad replacement. Slide the polished, wedge shaped tool between pads to expand the gap and pre-set the pistons into the caliper.
A selection of essential Torx wrenches in a convenient folding packageOne piece composite handle is comfortable lightweight and slip resistant - and 40% stronger than steelWrenches are made from high torque Bondhus Protanium industrial quality tool steel for a long lifeEasy to recognise on the work bench or tool box as this Torx set comes in green rather than the traditional Park blueThe T7 T9 T10 T15 T20 T25 T27 T30 and T40 Torx sizes supplied cover all the requirement of bikes todayTorx wrenches are becoming increasingly popular on Disc brakes and chainring bolts as they make it harder to round off bolts
The Park Tool Precision Hex Driver is a professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigors of everyday use.Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fastenersFeaturing an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use
The Park Tool 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fastenersMade in the USA and covered by Park Tool's legendary limited lifetime warranty
The Park Tool DH-1 works with all derailleurs and 1/8" chains. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.
Part of a range of combination Headset wrenches that cover all bicycle requirementsThe Y-head design puts metal where it is needed for strength and durabilityThe laser-cut openings are a precise fit, as this operation takes place after the heat treatment processFeatures a 15 mm pedal wrench, and 32 mm wrench for 1 inch Headsets
Key Features: A bespoke pair of snap ring or circlip pliers designed to work with the fittings found on suspension and hydraulic systems,Forged for strength and durability and then dipped in Park blue vinyl for comfort and grip,1.3mm bent internal size,Covered by Park Tool's legendary lifetime warranty.
Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
Park Tool Threadless Nut Setter TNS-1The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.Features:The TNS-1 is for 1” and 1-1/8” headset systemsBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features:Also called a sleeping hub, the DH-1 fits into a frames rear dropouts to replace the rear wheel for chain cleaning and transport.The unique design allows shifting with the DH-1 installed.Works with all derailleur and 1/8 inch chains.Works on frames with both open-type dropouts and 12 mm thru axle dropouts.
The Park Tool Sliding T-Handle Hex Wrench is a professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Carefully selected combination of Chrome Vanadium and S-2 tool steelsUnique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortlessMachined, chamfered tips allow easier insertion into hex fittingsIntegrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easySliding T-handle creates increased leverage and multiple access positions
The BBT-19.2 is a heavy duty, shop quality tool for installing and removing Shimano, SRAM, TruvativÂ, Race Face, FSA and Campagnolo 16-notch external bottom bracket cups with an outside diameter of 44 mmUpdated to be more accurate and longer lasting, the BBT-19.2 can be turned with a 3/8 inch drive torque wrench or ratchet, a 1 inch wrench, or a Park Tool FRW-1 Freewheel Remover Wrench
The handlebar holder is designed to prevent the handlebar and front wheel from rotating when a bike is mounted in a Park Tool repair standFits handlebars with a diameter up to 32mm and oversized top tubes up to 50mmHBH-2 works on almost any road or mountain bike
Park Tool Dummy Hub - DH-1This Dummy Hub from Park Tool allows you to remove your rear wheel so you can enjoy easy access to clean your bike chain. Unique and Easy-To-FitThe Dummy Hub, also known as a sleeping hub, will work with all 1/8" and derailleur chains and is designed to allow you full access to your chain for cleaning and scrubbing. It easily slides into your rear dropout, clipping securely in place to keep the shape of your chain, which also makes it ideal for transporting without the hassle of having to completely break down your bike. Working with thru axle frames up to 12mm and open dropout frames, the Park Tool Dummy Hub is an essential accessory for bike shops, home mechanics and casual riders.Features:Perfect for drivetrain cleaning or transportChain Compatibility: All 1/8" and Derailleur ChainsFrame Compatibility: Open Dropout and Thru-Axle (up to 12 mm)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Eliminate the guesswork out of fitting the star nutFits 1 inch and 1-1/8 inch steerer tubesSets the star nut to 15 mm depth and keeps it straightLong handle prevent pinched fingers
Park Tool Handlebar Holder HBH-2As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:The Handlebar Holder is designed to prevent the handlebars and front wheel from rotating when a bike is mounted in a Park Tool Repair StandUpdated to fit handlebars up to 32mm and oversized top tubes up to 50mm, the HBH-2 works on almost any road or mountain bikeBuy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new CM-5.3 Cyclone Chain Scrubber from Park Tool cleans your bicycle chain quickly, easily and effectively without the hassle and mess of removing the chain from the bike.Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikesStrong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chainSpecial wicking sponge draws solvent from the chain as it exits, minimizing drips and messSturdy handle makes the Cyclone easy to use and controlHolds 2 fluid ounces (59ml) of solventThe Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. It works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes.Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain and a special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess. The sturdy handle makes the Cyclone easy to use and control.
A clean bike is a happy bike! The BCB-4.2 is a four-piece brush set made specifically to clean bicycles. Ergonomically designed with dual density sure grip handles. Includes: 1 GSC-1 GearClean™ Brush 1 Tapered Detail Brush 1 Frame Cleaning Sponge/Bristle Brush 1 Soft Bristle Soaping Brush