Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels, Featuring an unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Sliding T-handle creates increased leverage and multiple access positions.
Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels, Featuring an unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Sliding T-handle creates increased leverage and multiple access positions.
An updated version of the original and best selling Park Master Link pliersMany non-Shimano derailleur chains use a master link that allows the chain to be installed and removed by handWhile this type of masterlink doesn't require a traditional chain tool over time dirt and corrosion can make it very difficult to separate by handMLP-1.2 Master Link Pliers have cleverly redesigned tips allowing them to be used to rejoin stiff or corroded master links as well as split themSimply insert the specially sized jaws into the masterlink and squeeze the handlesMade in the USA and covered by Park's legendary limited lifetime warranty
When the conditions haven't been the best and your bike arrives home looking like it has been placed behind a muck spreader there is only one thing for it, a darn good clean! There is no need to get dirt under your finger nails as the Park Bike Cleaning Brush Set has been put together for you to get your bike looking its showroom finest! With 4 brushes designed for each specific area of your bike there won't be a spot that has been untouched.Official Park Tool Brush SetGear Clean Brush, Tapered Detail Brush, Frame Cleaning Sponge / Bristle Brush, Soft Bristle Soaping BrushErgonomically DesignedDual Density Sure Grip HandlesCovered By Park's Limited Lifetime Warranty
A lightweight apron to keep your clothes clean when at work in the workshopConstructed from a durable 7 ounce poly-cotton twillPouch pockets for stashing tools and chocolate barsProtects the front of the bodyTo save dignity please wear with other clothes
Key Features:Double ended tools save space in the workshop.Features the proven Y-head design that puts metal where it is needed for strength.Combined lockring tool, with a single hook on one end for the greatest versatility, and 3 pins on the other end for maximum engagement.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Park Tool Single Speed Spanner SS-15Designed and built especially for single speed bikes, the SS-15 is a forged, multi-purpose ride saver.Just the right size and length (17cm/7”) to take along or to wrench in the garage, the SS-15 is destined to be a single speeder’s favourite.Park Tool Single Speed Spanner Includes: 15mm socket wrench for axle nuts. 15mm open end wrench for pedals. Tire lever. Bottle opener.Buy Park Tool Single Speed Spanner from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Made for the rigors of everyday shop use with precision ground components and vinyl dipped handles for comfort.Fits most metric taps from M1.6-M8 and standard taps from 0-5/16 inch.Covered by Park Tool's legendary lifetime warranty.
A great time saver for anyone who builds wheels, neatly designed to self-centre and drive conventional alloy or brass nipples during wheel lacing. The comfortable dual density grip delivers easy handling as the offset driver bit rotates on precision bronze bearings for a long, smooth running life. Works with rims up to 50 mm in depth.
Park Tool Big Wheel Pizza Tool II PZT2What’s better than pizza after a good day of wrenching or riding? An update of one of the all-time greats, the PZT-2 Pizza Tool is bigger (for better hand position), better (super sharp, large diameter stainless steel cutting wheel cuts through even the toughest terrain), and stronger!Amaze your friends, show off to your in-laws. It’s a bicycle…it’s a pizza cutter!Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool HBH2 Handlebar Holder is designed to prevent the handlebar and front wheel from rotating when a bike is mounted in a Park Tool Repair Stand. Updated to fit handlebars with a diameter up to 32mm and oversized top tubes up to 50mm, the HBH2 works on almost any road or mountain bike.
Park Tool Utility Knife (UK-1) Park Tool's Utility Knife UK-1 is a straight-forward cutting tool, designed with safety and precision in mind. Housed in a Park Tool signature blue handle, the UK-1 folds out to utilise its stainless steel and aluminium blade, folding back on itself for secure and easy portability ion your saddlebag or tool box. Compact and Convenient Utility KnifeGreat for general workshop use or for necessary cutting when out-and-about, the UK-1 locks in place for stable and safe use and has a secure, quick-change blade system that allows for removal of old blades and installation of new ones. Compatible with readily available hardware store utility knife blades, you will never need a new knife handle thanks to the UK-1. Features: Material: Aluminium and Stainless Steel How to Use Locking The Blade: Pulling the blade fully open will click it into a locked position, making sure it won't slip or wobble while in use. The body of the knife has an indentation adjacent to the locking mechanism. Pushing the locking mechanism away from the blade allows you to safely push the knife blade closed for your next use. Changing The Blade: Once the knife is fully opened, push the knurled knob above the blade from the logo side of the knife. Pull the blade firmly and it will leave the housing. Reverse the process to install a new blade. Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool ZP-5 Flush Cut Pliers are forged and machined and are a high-quality flush cutter, ideal for closely cutting zip ties, especially in tight spaces.Not suitable for inner and outer gear and brake cable cutting - check out QKCN10 for the heavier jobsRubber coated grips for control and sprung jaws for easy single-handed useCovered by Park Tool's legendary limited lifetime warranty
Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital dial or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. DCA-1 FEATURES Compatible with most standard vernier dial and digital caliper designs
Park Tool Adjusting Cap Tool BBT-10.2This Adjusting Cap Tool from Park Tool has been engineered to work with Shimano Hollowtech II Cranks. Constructed from durable investment cast steel, this hard-wearing tool will help you make light work of any maintenance required.Unique Crank Cap Removal Tool The 2-wing designed Adjusting Cap Tool BBT-10.2 provides great leverage for twisting the caps off and on by hand, with an additional spot for an 8mm hex wrench to be used for loosening seized-on caps. It also features a specially sized hook to lift the crank's safety plate, making the Adjusting Cap Tool BBT-10.2 the perfect companion for Shimano Hollowtech II users.Features: Material: Investment Cast Steel Compatibility: Shimano Hollowtech II cranks Functions: Unique cap fitting, safety-plate hook, 8mm hex wrench slot Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Utility Knife UK-1 from Park Tool has been specially designed for years of long-lasting use, thanks to the robust aluminium and stainless steel material. An Ideal addition to your toolbox and portable to bring with you on your next adventure, the UK-1 is the ultimate compact knife for essential bike maintenance, whatever the situation. Equipped with a quick-change blade system, you can effortlessly change the blade on the knife by removing it from the handle and replacing it with a new one. Fully compatible with hardware store utility knife blades, you won't have to worry about needing to buy another handle again. The Utility Knife UK-1 is the perfect choice for home workshop use or for bringing with you on the move. How to Use Locking The Blade: Pulling the blade fully open will click it into a locked position, making sure it won't slip or wobble while in use. The body of the knife has an indentation adjacent to the locking mechanism. Pushing the locking mechanism away from the blade allows you to safely push the knife blade closed for your next use. Changing The Blade: Once the knife is fully opened, push the knurled knob above the blade from the logo side of the knife. Pull the blade firmly and it will leave the housing. Reverse the process to install a new blade.
The HMR-4 has a fiberglass shaft, a soft touch rubber grip, and a two-sided head—steel on one side and a replaceable plastic head (part #293) on the other side.
Park Tool Shop Hammer (HMR-4)Custom-made for working on bikes, the HMR-4 Shop Hammer has a lightweight fibreglass handle with a grip that’s made from soft and high grip rubber. Park Tool has also equipped it with a dual-purpose steel head, which has a plastic cover on one side for tasks that require a little more finesse. Ideal for combining with other tools for extracting headset and bottom bracket bearings, this bike tool is an ideal addition to your home or shop bike repair and servicing toolkit.Features: Material: Head: Steel with Plastic on one side; Handle: Fibreglass with soft touch Rubber grip Handle Length: 345mm (13.5")Steel Striking Face Diameter: 35mm (1.3/8")Plastic Face Diameter: 43mm (1.11/16")Plastic head is replaceable (Park Tool part number: 293 - sold separately)Head Weight: 680g (24oz)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool TNS1 Threadless Nut Setter is used to install the star-fangled nut found on threadless headset systems.Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the star-fangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
A lightweight apron to keep your clothes clean when at work in the workshopConstructed from a durable 7 ounce poly-cotton twillPouch pockets for stashing tools and chocolate barsProtects the front of the bodyTo save dignity please wear with other clothes