Covered by Park Tool's legendary limited lifetime warranty
Made from investment cast steel and reinforced with extra material at the highly stressed openings for a shop quality pedal wrench made to last. 15mm and 9/16 inch precision openings and an extra long, round, vinyl dipped handle that won't dig into your hand like flat pedal wrenches
Park Tool Professional L-Shaped Hex Wrench Set HXSImportant for working on any bicycle the Professional Hex Wrench Set has everything you need for any type of maintenance that requires a hex key.The Part Tool tools are shop quality, made from industrial quality Bondhus Protanium™ high torque steel, ensuring a long life of wrenching. A ball driver tip on the long arm gives easier access to hard-to-reach bolts while the long arm has a standard tip for high torque applications.Features:Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes hex keysMaterial: Made from industrial quality Bondhus Protanium™ high torque steelPopular home and professional workshop item, providing a set of all popular Allen wrenchesBondhus Balldriver tip on the long arm (except on 10 mm size) allows access to awkwardly placed boltsHinged holder features tapered holes for easy locationBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Compact Bottom Bracket Tool BBT-18The BBT-32 is a heavy duty, investment cast tool for installing and removing the following eight-notch bottom bracket cups:Features:Shimano ISIS Drive ISIS OverdriveNote: The BBT-32 is an updated version of the current BBT-8. The outside diameter of the tool has been changed so it provides a universal fit on all Shimano and ISIS Drive eight-notch cups. The BBT-32 has 8 notches with an outside diameter of nominally 43.4mm. The inside-to-inside width is approximately 38mm. Each notch is approximately 3.9mm wide. The hole in the center of the casting is 22.5mm, and will not fit over the 30mm spindles.Buy Park Tool Workshop Toolsfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Shop Screwdriver Set (SD-SET)The essential kit for your workshop, this Screwdriver Set from Park Tool includes four Park Tool screwdrivers in one set. Benefiting from dual-density grips and hard-wearing chrome vanadium tips, this is a set that's built to last. Features:Includes two Phillips crosshead size 0 and 2, and two flat blade 3 and 6mm screwdriversBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Pedal Wrench PW-3As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:Made from Cro-Moly steel for a shop quality pedal wrench made to last. 15mm and 9/16” precision openings and a long, round, vinyl dipped handle that won’t dig into your hand like flat pedal wrenches. The PW-3 is nominally 32cm (12.5") long.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
A versatile pedal wrench for regular shop use15 mm and 9/16 inch open endsThe extra long tubular section handle will resist flexing, and it is vinyl dipped for comfort and a secure gripMade from Cr-Mo steelReinforced at the spanner openings for a stronger longer life
FeaturesPopular home and professional workshop item, giving a set of all popular Hex wrenches,Includes 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes,Bondhus Balldriver tip on the long arm (except on 8 mm and 10 mm sizes) allows access to awkwardly placed bolts,Speed Bearing system on 3, 4, 5, 6, and 8 mm allows quick fitting of bolts,Super strong 8650 Cr-Vntool steel,Holder features tapered holes for easy location,.
Shop quality screwdriver set designed for comfort and durabilityDual density grips and heated treated vanadium tips and shaftsIncludes two Phillips cross head size 0 and 2, and two flat blade 3 and 6 mm screwdrivers
Heavy duty tyre levers for use on the toughest of tyre and rim combinations8 inch long forged steel for superior leverageMakes removal of downhill tubeless Dutch style and high pressure BMX tyres an almost effortless jobSpecially designed tip lifts the tyre bead safely and smoothlySet of 2
A heavy duty pedal wrench for serious workshop use. Key Features: A heavy duty pedal wrench for serious workshop use. Two 15 mm openings are orientated at 30 degree and 45 degree angles to ensure that you have the best mechanical advantage. The tubular section handle will resist flexing and it is vinyl dipped for comfort and a secure grip. Provides enough leverage to loosen the tightest pedals. Made from Cr-Mo steel for the best strength and durability.
The Park Tool DTD-10 is a precision component Torx-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T10 tip.The DTD-10 is a precision component Torx compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners.The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittingsFeaturing an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T10 tip10 Torx-compatible wrenchNot intended for high-torque applicationsTotal length: 3.75" (95mm)Shaft length: 1.7" (43mm)Weight: 2.22 oz. (63g)
The Park Tool DTD-8 is a precision Torx-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T8 tip.The DTD-8 is a precision Torx compatible driver machined to exact standards to ensure a perfect fit on compatible component fastenersThe stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittingsFeaturing an ergonomic CNC-machined hard-anodized 6061 aluminium handle and a precision T8 tipT8 Torx-compatible wrenchNot intended for high-torque applicationsTotal length: 3.75" (95mm)Shaft length: 1.7" (43mm)Weight: 2.22 oz. (63g)
An accurate way to check for wear of roller and pin on chains1% of wear is enough to affect chainrings and sprockets and allow shifting performance to deteriorateJust insert the chain Checker's pins into two links press the swing arm gauge and then check the gauge window for an accurate readingReads wear from 0.25% to 1%10-speed compatible
The DTD-8 is a precision Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T8 tip. DTD-8 FEATURES T8 Torx®-compatible wrench Not intended for high-torque applications Total length: 3.75' (95 mm) Shaft length: 1.7' (43 mm) Weight: 2.22 oz. (63 g)
The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. DTD-10 FEATURES 10 Torx®-compatible wrench Not intended for high-torque applications Total length: 3.75' (95 mm) Shaft length: 1.7' (43 mm) Weight: 2.22 oz. (63 g)
Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
These bike brushes have “Sure Grip” dual density handles to ensure a positive grip even with wet hands. Each item in this Park Tool Brush Set is specially designed for a specific cleaning purpose: The "Y" brush is for large frame tubes and tyres. It will wrap around these to clean. The wire can also be bent to different shapes for different size tyre and tube shapes. The frame cleaning sponge brush is a combination scrubbing sponge/bristle bush. Very useful between spokes on the rim. Also good for rotors and under the headset, and under the fork. The tapered detail brush also called a "bottle brush" is useful for cleaning hub centres and narrow areas, such as under front derailleurs, behind brakes, etc. The GSC-1 gear brush is for rear derailleur pulleys, rear cogs and any general degreasing. Its comb section is for cleaning between cogs where the bristles cannot reach.
With most manufacturers recommending replacing your chain at 0.75% stretch, the Park Tool chain checker will quickly and precisely let you know if you are over or under. As overworn chains can cause poor shifting and uneven drivetrain wear, having an accurate gauge to hand won't just save your chain, but can also save the full functionality of your bike. Reading wear from 0.25% to 1%, the CC-2 is compatible with 9/10/11-Speed chains and measures the stretch by simply inserting the pins between two links and pressing the swing-arm gauge tight to read your accurate reading in the gauge window. (Note: For 9/10-speed chains, replace the chain at or before the 0.75% reading, and for 11/12-speeds, replace before the 0.5% reading. Always check with the manufacturer for any specific replacement instructions and recommendations.)
With pincers and legs constructed of chromoly steel and heat-treated for durability and strength, Park Tool has made sure that these pliers have been made comfortable for daily use by attaching soft-touch dual density handle grips. Resistance and hold are provided by an 'invisible', concealed spring which gives fantastic control when squeezed, letting you crimp, cut and pull with ease. A fantastic take on a toolbox must-have, the Needle Nose Pliers NP-6 from Park Tool is a hard-working, multi-use tool, in or out of the garage.