Key Features: Made from a carefully selected combination of Chrome Vanadium and S-2 tool steels,Unique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortless,Machined, chamfered tips allow easier insertion into hex fittings,Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy,Sliding T-handle creates increased leverage and multiple access positions.
Designed and built especially for single speed bikes, the SS-15 is a forged, multi purpose ride saverJust the right size and length (17 cm / 7 inches) to take along in a saddle bag or jersey pocket or to keep for wrenching in the garageFeatures a 15 mm socket for axle nuts and a 15 mm open end for removing or installing pedalsSmooth, curved spoon tyre lever to get you out of a jamBottle opener included to ensure he SS-15 remains a single speeders favourite.
The Park Tool BBT-18C is a heavy duty, investment cast tool for installing and removing all Shimano, SRAM, and ISIS Drive eight-notch bottom bracket cups. This tool also includes 36mm wrench flats for ease of use.
Features:A great time saver for anyone who builds wheels.Neatly designed to self-centre and drive conventional alloy or brass nipples during wheel lacing.Comfortable dual density grip for easy handling.Offset driver bit rotates on precision bronze bearings for a long, smooth running life.Works with rims up to 50 mm in depth.Made in the USA and covered by Park's legendary limited lifetime warranty
Just the right size and length (17cm/7”) to take along or to wrench in the garage, the SS-15 is destined to be a single speeder's favourite.
Key Features: The RPP-1 offers simple but effective protection for your service area,This 32ÔÇØ tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand,Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease,Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3,Easily removed and installed with hook-and-loop material.
The MT-10 is a high quality, folding take-along tool.Key Features:Features forged aluminum side plates.Hardened and plated tools.Smooth ergonomic operation.3, 4, 5 and 8mm hex wrenches.T25 Torx® compatible driver.Combo cross/straight tip screwdriver.Key ring holder.76 grams.
Specially designed tool to gently adjust bent or damaged brake rotorsTwo different slot depths are laser cut from high quality stainless steelCompatible with any size and make of disc rotorCentre handle is vinyl dipped for extra comfortNo need to put up with disc brakes that drag any more
The Park Tool Sliding T-Handle Hex Wrench is a professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Carefully selected combination of Chrome Vanadium and S-2 tool steelsUnique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortlessMachined, chamfered tips allow easier insertion into hex fittingsIntegrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easySliding T-handle creates increased leverage and multiple access positions
A chain tool that is small enough to go anywhere yet which performs like a full size workshop toolFine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivetsIncludes a loosening shelf to release stiff links after assemblyReplaceable driving pin headWorks on most bicycle chains including 10-speedWeighs just 77 grams
The BBT-19.2 is a heavy duty shop quality tool for installing and removing Shimano SRAM Truvativ Race Face FSA and Campagnolo 16-notch external bottom bracket cups with an outside diameter of 44 mmUpdated to be more accurate and longer lasting the BBT-19.2 can be turned with a 3/8 inch drive torque wrench or ratchet a 1 inch wrench or a Park Tool FRW-1 Freewheel Remover Wrench
Park Tool Crank Puller (CCP-44)With its long handle and fine thread to engage fully with compatible cranksets, the CCP-44 Crank Puller gives you the grip and control for removing even the most stubborn crank arms. Park Tool has made this easy to use pulling tool compatible with a wide range of Shimano Octalink and FSA ISIS Drive models.Features: Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a "self-extracting" system22 x 1mm fine thread provides leverage needed to remove tight crank armsStrong rotating tip system ensures smooth operation and long life Not suitable for use with square taper type cranksetsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-22)With its long handle and the finely threaded head, the CCP-22 crank arm removal tool quickly attaches and gives you the advantage you need for removing stubborn crank arms. Park Tool has made it to be compatible with a wide range of models, making it ideal for home mechanics and professional mechanics alike.Features:Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt The strong rotating tip system ensures smooth operation and long lifeNOTE: For cranks using the ISIS Drive or Octalink system, look for the CCP-44 or the CWP-7 models.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. The unique "floating tip" ensures smooth operation and long life. As with most Park Tool products, it also features a hole specifically designed for hanging on a tool wall.
Key Features: The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset,The 768 is used with the 690-XL facer and the 750 centering cone adapter,Facing the head tube will improve the alignment of the bearings,The 768 pilot fits the Park tool HTR-1 Head tube Reamer and Facer Set.
The Park Tool CCP-44 is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a self-extracting system.
What more could you want than pizza after a good day of wrenching or riding? An update of one of the all-time greats the PZT-2 Pizza Tool is bigger (for better hand position) better (super sharp large diameter stainless steel cutting wheel cuts through even the toughest terrain) and stronger! Amaze your friends show off to your in-laws; a bicycle and also a pizza cutter! Covered by Park Tool's legendary limited lifetime warranty
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a One Key Release systemIt uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank armsUnique rotating tip design has been updated over the CCP-4 and ensures even smoother operation and longer lifeNote: The CCP-44 will not work on crank arms that fit standard square, tapered bottom bracket spindles
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal