Best protection with high luminosity! The SKS NightBlade Mudguard for the rear wheel is an enlightening example of integrated bicycle solutions. It not only provides optimal splash protection; it also ensures greater safety in road traffic from the integrated rear light. Material: PlasticColour: BlackWeight: 265g / 275gWheel size: 26", 27,5", 29 Tyre width: 3.0"Length rear fender: 550mm / 620mmThe rear light with its integrated rechargeable battery can be removed and charged with a USB connection. The spoilers of softer plastic serve as edge protectors when getting on or off the bike. The simple quick-release mounting system enables the NightBlade to be mounted on almost all seat posts using power straps and the 2-joint technology enables them to be optimally adjusted to mountain bikes. The mudguards are suitable for mounting with 26 , 27.5 and 29 tyres.
Best protection with high luminosity! The SKS NightBlade Mudguard for the rear wheel is an enlightening example of integrated bicycle solutions. It not only provides optimal splash protection; it also ensures greater safety in road traffic from the integrated rear light. Material: PlasticColour: BlackWeight: 265g / 275gWheel size: 26", 27,5", 29 Tyre width: 3.0"Length rear fender: 550mm / 620mmThe rear light with its integrated rechargeable battery can be removed and charged with a USB connection. The spoilers of softer plastic serve as edge protectors when getting on or off the bike. The simple quick-release mounting system enables the NightBlade to be mounted on almost all seat posts using power straps and the 2-joint technology enables them to be optimally adjusted to mountain bikes. The mudguards are suitable for mounting with 26 , 27.5 and 29 tyres.
Key FeaturesEasy To Fit Mudguard,Suitable For 20 To 22 Inch Bikes,Light,Suitable For Unicrown And Cantilever/Caliper Brake Systems .
MudHugger Front Gravel Hugger MudguardThe Front Gravel Hugger is a gravel bike-specific mudguard that protects you from trail debris flicking up, water splashing over you and anything else your tyres may kick up towards you. Wide Gravel Bike MudguardFollowing the tried and tested tyre hugging design of the MTB Mudhuggers, the GravelHugger is designed to fit most fork, wheel and tyre (up to 50mm wide) combos for your gravel bikes. To reduce single-use plastic waste and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be used if you'd prefer to fit the guard and leave on your bike at all times. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Fork Compatibility: Suits all solid 650b and 700c forks Includes O rings for non-permanent installation Weight: 150g (approx)Buy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fits MTB 26” Tires Up To 26” x 2.6”DeFender™ XC11 is an elegant, lightweight, and compact removable rear fender. A secure quick release clamp adjusts from ø25.4 mm to ø34.9 mm while multiple pivots articulate the fender for a perfect fit. High impact plastic is co-molded with flexible material for greater durability and the highly polished underside helps prevent dirt buildup and aids in cleaning. Fits MTB 26” tires up to 26” x 2.6”Attachments QR Slip Joint Clamp Fits ø25.4 - ø34.9 mm Seatpost.Adjustable Multiple Angles Adjustable.Material Two Tone Injected High Impact Resistant Plastic.Added Features Highly Polished Underside.Size (L x W x H) 56 x 10.2 x 6.8 cm,22" x 4" x 2.7".Weight 202 g / 7.11 oz.
High quality clip-on MTB mudguard set for 650B and 29” wheels. Key Features:The set consists of the X-Blade which is a 2-component dirtboard for the rear wheel of mountain bikes. ,Due to the quick-release mounting, the X-Blade can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. ,The X-Board is an innovative front guard with rubber straps fitting on the downtube, and the same 2-component construction as the X-Blade to form a matching pair. ,Supplied with adjustable cable spacers..
The X-GUARD is a universal mudguard for any wheel size. It is attached using two straps on the lower bar, so fat bikes and bicycles with oversized tyres in particular can rest assured of absolute all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-GUARD suitable for any frame shape and all commonly marketed battery models. Key Features:Material: Plastic,Colour: black,Weight: 145g,Wheel Size: 26", 27,5", 28", 29 ",Profile Width: 141 mm,Length Front Fender: 480 mm,.
Topeak Defender XC11 Rear Bike MudguardWith its simple tool-free seatpost mounting collar meaning it can be fitted in seconds, the Defender XC11 gives your back wheel excellent coverage for riding on wet and muddy terrain. Topeak has made it from impact-resistant plastic so it’s ready for all the abuse that the trails can hand out. Plus, the easy to use mount on this mudguard is compatible with seatpost sizes ranging from 25.4-34.9mm. It’s also suitable for tyre widths up to 2.5”, ensuring compatibility with wide mountain bike (MTB) tyres.Features: Material: Injection Moulded High Impact Resistant Plastic Wheel Size: Separate options for 27.5" and 29" wheels Maximum Tyre Width: 27.5": 27.5x2.5"; 29": 29x2.5". Highly polished underside Quick Release Seat Tube Attachment Two-Tone Injected High Impact Resistant Plastic Multiple Angles Adjustable Dimensions: 27.5": 62x10.2x7cm / 24.4 x 4" x 2.8"; 29": 67x10.2x7.5cm / 26.4" x 4" x 3" Weight: 27.5": 215g/7.57oz; 29": 220g / 7.74ozBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
3.0mm twin-parallel, stainless-steel stays are light and strong and provide secure support. Stays slide in adjustable brackets for an optimal and easy fit. Secu Clip 'break-away' fittings on front stays offer a secure yet safe union with the fork. Fenders are constructed from PET plastic and carry an aluminium foil insert, making them durable and light. Mud flaps front and rear provide enhanced protection. Pre-assembled for an easy fit. Supplied with everything you need to fit the mudguards, including a full fitting kit, allen key, braze-on bolts and a snap-fit sliding bridge for the rear.
RapidRacerProducts ProGuard Rear MudguardSuper-protective against the mud, muck and spray of the enduro run, this rear mudguard does all it can to keep you clean on every ride. Dotted with 43 snap-off top holes to fit straight braces between the seat stays and an optimised indent which increases tyre clearance by 4mm, it is the ideal mudguard for a variety of wheels. Made from a durable polypropylene, it protects your rear suspension as well as the rest of your back end, making it a perfect choice for the daring downhill rider.Features:Material: Polypropylene with gloss finishProtection: Seal ShieldWheel Compatibility: 26", 27.5", 29"Tyre Compatibility: Up to 3"Length: 352mmWeight: 64gBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
SKS Commuter Hybrid Mudguard SetA high quality, low cost, full length mudguard set with high quality, stainless-steel fittings. Multiple sizes to suit several different wheel or tyre sizes.Features:3.0mm twin-parallel, stainless-steel stays are light and strong and provide secure support. Stays slide in adjustable brackets for an optimal and easy fit. Secu Clip 'break-away' fittings on front stays offer a secure yet safe union with the fork. Fenders are constructed from PET plastic and carry an aluminium foil insert, making them durable and light. Mud flaps front and rear provide enhanced protection. Pre-assembled for an easy fit. Supplied with everything you need to fit the mudguards, including a full fitting kit, Allen key, braze-on bolts and a snap-fit sliding bridge for the rear. Weight: approximately 495g per pair. Colour available: Black and SilverFittings: Included
Full length mudguard set with zink-plated and pre-assembled twin-parallel stays.Key Features:Stays slide-in adjustable brackets for an optimal and easy fit,Secu clip break-away fittings on front stays avoid blocking of the wheel when an object gets between tyre and mudguard,Mudguards are constructed from durable PET plastic.