The high-quality 2-component dirtboard for the rear wheel of mountain and trekking bikes. Whether you ride 26 27.5″ 28″ or 29″ we have the right X-BLADE for you in the range.Due to the quick-release mounting the dirtboard can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.”
High-quality 2-component front mudguard for mounting on the fork of mountain and trekking bikes. The Shockblade is available in sizes 26”/27.5” and 28”/29”.The chuck cone disappears almost invisibly into the steerertube
Unmatched protection from mud and spray from the RRP ProGuard V2. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyre clearance and reduces mud clogging unlike other mudguards of this style.Mini: Ideal for good all-year-round good protection that s more discreetStandard: Superb coverage and protectionMax: 21mm longer than standard at the front and 68mm longer at the rear. Offers the very best levels of protectionLonger front minimises high speed sprayFork brace indent allows for greater tyre clearanceSlots and holes for easy installation with cable ties (included) or Velcro straps (sold separately)Rear flick offers even more protection especially whilst corneringSeal protection increased with our acclaimed Seal Shield designCompatible with 26 , 27.5 and 29 forks (reverse arch not compatible) with tyres up to 3 Made with RRP s unique polypropylene mix which gives great flexibility, durability and strengthMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionDesigned, manufactured and packed in the UKMini: 100g, Standard: 119g, Max: 133g
Unmatched protection from mud and spray from the RRP ProGuard V2. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyre clearance and reduces mud clogging unlike other mudguards of this style.Mini: Ideal for good all-year-round good protection that s more discreetStandard: Superb coverage and protectionMax: 21mm longer than standard at the front and 68mm longer at the rear. Offers the very best levels of protectionLonger front minimises high speed sprayFork brace indent allows for greater tyre clearanceSlots and holes for easy installation with cable ties (included) or Velcro straps (sold separately)Rear flick offers even more protection especially whilst corneringSeal protection increased with our acclaimed Seal Shield designCompatible with 26 , 27.5 and 29 forks (reverse arch not compatible) with tyres up to 3 Made with RRP s unique polypropylene mix which gives great flexibility, durability and strengthMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionDesigned, manufactured and packed in the UKMini: 100g, Standard: 119g, Max: 133g
Designed to help protect your shock, linkages and bearings from getting hammered by mud, dirt and water at high velocity from your back wheel. This helps to minimise cleaning post ride and maximise intervals between services. ProGuard rear's versatile design allows for easy fitment on a huge range of bikes43 snap-off top holes to fit straight braces between the seatstays, raised braces, or dropped braces including those with supporting strutsIndent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike)Side arms designed to fit conventional seatstays (that go to centre of wheel), and offset seatstays (raised up from centre of wheel)Recess to protect sticker allowing you to match the sticker on your ProGuard Front mudguardMade of the same thick Polypropylene material used on the ProGuard FrontSame matte textured finish with gloss highlights you see on the ProGuard Bolt On mudguardsZip ties are providedNew for 2023 the ProGuard Rear is now available in two lengths, Mini and Standard. The Mini is the original guard we ve had in the range for a couple of years. The Standard joins the range to offer an extended coverage option. The ProGuard Rear Standard offers an additional 83mm on the rear coverage and 140mm additional length at the front. The material at the front of the guard is made using a slightly thinner material so it can be trimmed to optimise the fit to your specific bike. All RRP mudguards are designed, manufactured and packed in the UK. They are manufactured from a carefully selected Polypropylene designed for durability and optimising the balance of flexibility and stability.
Motivating yourself to ride in the rain is hard enough but to do it without mudguards is even harder! Trying to get comfy on your saddle when your behind is soaking wet and covered in mud is almost impossible. The best way to prevent this is with a clip on fender and the Topeak Defender XC11 Rear Mudguard has all the features to keep you and your bike protected from the elements. Constructed from impact resistant plastic this fender is lightweight and attaches to your seat post in seconds thanks to the quick release mounting system. Unlike lots of rear fenders which stay in one position this one can be adjusted to an angle that suits you so you can guarantee you stay protected.
Featuring an adjustable clamp, which also pivots for ultimate versatility; it is compatible with virtually any frame style, geometry and trail conditions. Constructed from a high impact plastic, which is a co-molded flexible material for greater durability and features a highly polished underside to help prevent dirt buildup and aids in cleaning.
These guards are very easy to install and adjust, making protection from the elements simple. Whether in town or on meadow tracks – the SKS VELO 55 CROSS mudguards are the ideal companions. After initial assembly, the clip-on mudguards can be attached to almost any frame tubes without tools using the practical universal fastening. Durable and Stylish Mudguard Set U-stays equipped with an ESC safety system are also available as an option. Made of black high-performance impact-resistant plastic with an integrated SKS logo, the mudguards also visually enhance your bike. Please Note: SKS U-Stays are sold separately.
Topeak Defender XC11 Rear Bike MudguardWith its simple tool-free seatpost mounting collar meaning it can be fitted in seconds, the Defender XC11 gives your back wheel excellent coverage for riding on wet and muddy terrain. Topeak has made it from impact-resistant plastic so it’s ready for all the abuse that the trails can hand out. Plus, the easy to use mount on this mudguard is compatible with seatpost sizes ranging from 25.4-34.9mm. It’s also suitable for tyre widths up to 2.5”, ensuring compatibility with wide mountain bike (MTB) tyres.Features: Material: Injection Moulded High Impact Resistant Plastic Wheel Size: Separate options for 27.5" and 29" wheels Maximum Tyre Width: 27.5": 27.5x2.5"; 29": 29x2.5". Highly polished underside Quick Release Seat Tube Attachment Two-Tone Injected High Impact Resistant Plastic Multiple Angles Adjustable Dimensions: 27.5": 62x10.2x7cm / 24.4 x 4" x 2.8"; 29": 67x10.2x7.5cm / 26.4" x 4" x 3" Weight: 27.5": 215g/7.57oz; 29": 220g / 7.74ozBuy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
SKS Velo 55 Cross Mudguard SetWhether city or off-road, no matter where you travel, the SKS VELO mudguards are a reliable companion for you.Whether in town or on meadow tracks - the SKS VELO 55 CROSS mudguards are the ideal companions. After initial assembly, the clip-on mudguards can be attached to almost any frame tubes without tools using the practical universal fastening. Durable and Stylish Mudguard SetU-stays equipped with an ESC safety system are also available as an option. Made of black high-performance impact-resistant plastic with an integrated SKS logo, the mudguards also visually enhance your bike.Features: Made of high-performance impact-resistant plastic Rim: 28" Universal fastening without any tools after the initial assembly Optionally also with stay mounting clamps Ideal for all surfaces Made in Germany Weight: 232gPlease Note: SKS U-Stays are sold separately.Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The special design allows the rear mudguard to be adjusted to fit both hard-tails and full suspension bicycles. Quick release attachments means installing and removing them takes seconds.Durable injection-moulded nylon construction,Wide profile for maximum coverage,Rear is fully adjustable,Font and rear Quick release mounts,180g (Front), 200g (Rear)..
The 2 pivot arm of the M2 articulates for improved coverage and a perfect bike fit. A stiff engineering grade plastic support frame is co-moulded to a more flexible edge for greater durability.The unique quick release attachment system integrates seamlessly.Quick release for front and rear,Fits 25.4mm to 34.9mm seatpost,190g.