Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Defender Mudguard Set (M1 & M2)Keep yourself protected from dirt and mud spray when tackling tough terrain thanks to the Defender Mudguard Set. Including the M1 & M2 Defender models, both integrate seamlessly with your bike and are incredibly lightweight at only 190g for the M1 and 230g for the M2, so you don't have to worry about them weighing you down. The M1 is compatible with standard front forks including reverse arch designs and its quick release fork attachment fixes the M1 easily onto your bike. DeFender™ M2 has an ultra-secure quick release mounting system that easily adjusts from 25.4 to 34.9mm easily fitting standard and oversized seatposts. The two-pivot arm articulates for improved tyre coverage and perfect bike fit. A stiff engineering grade plastic support frame is co-moulded to a softer more flexible material at the trailing edge for greater durability.Features:Rear angle adjustableMaterial: Two Tone injected nylonAttachment (Front): Quick Release Fork attachment fits diameter 19.6 – 26mmAttachment (Rear): Slip join clamp fits diameter 25.4 – 34.9mm seatpostSize: 60 x 10 x 12cm (M1), 40 x 10 x 12cm (M2)Weight: 190g (M1), 230g (M2)Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
SKS Velo 65 Mountain Mudguard Set Whether city or off-road, no matter where you travel, the SKS VELO mudguards are a reliable companion for you. Extra features are their sporty look and a very quick slide-on and off attachment.For more stiffness optional stainless clip-in U-stay. Features: Rim: 26'' Colour: black Weight: 263g Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Optional mud guard designed specifically for the new 36 and 38 (2021 models only).,Proprietary and sturdy 4-point direct-mount attachment..
Motivating yourself to ride in the rain is hard enough but to do it without mudguards is even harder! Trying to get comfy on your saddle when your behind is soaking wet and covered in mud is almost impossible. The best way to prevent this is with a clip on fender and the Topeak Defender XC11 Rear Mudguard has all the features to keep you and your bike protected from the elements. Constructed from impact resistant plastic this fender is lightweight and attaches to your seat post in seconds thanks to the quick release mounting system. Unlike lots of rear fenders which stay in one position this one can be adjusted to an angle that suits you so you can guarantee you stay protected.
The Acid Mud Blocker from Cube is all you need to shred for miles in the muddiest conditions. It comes with a set of cable ties to keep the Mud Blocker firmly fixed in place even on super-rough terrain. The included transparent protection foils effectively protect the fork from scratches, while the integrated fork protection fends off mud to keep your fork clean and buttery-smooth. With a width of 87mm, the Mud Blocker fits most 26in, 27.5in and 29in mountain bike forks.Protects the face from front wheel sprayQuality plastic constructionFor 26", 27.5" and 29" tyresMaximum tyre width up to 2.6"Includes 6 cable tiesFork scratch protection foilsIntegrated fork spray protectionOptimised adjustment for maximum stabilityWeight: 107g Long / 89g ShortDimensions: Short (WxL) 87 x 340mm / Long (WxL) 87 x 405mm
The Fox Fork 36 and 38 Mud Guard is an optional mud guard designed specifically for the new 36 and 38 forks (2021 models only).Proprietary and sturdy 4-point direct-mount attachment.Sturdy 4-point attachmentGenuine OE parts
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
Sometimes, the Mucky Nutz Face Fender doesn't quite offer enough protection from mud flying from your front wheel. Enter the Mucky Nutz MudGuard which is designed for bigger, closer coverage, while retaining the sleek look and easy fitting of the legendary Face Fender.Designed to offer better coverage with elongated, 3D shape and recessed bridge area for more tyre clearanceWide upper arm profile protects fork seals and stanchions from dirt & mudCompatible with most suspension forks and 26 , 27.5 & 29 wheel sizes and tyres up to 3 Incredibly easy to fit with supplied Velcro rol, just like the original Face FenderShort Mudguard is 400mm long, Long MudGuard is 600mm for additional coverageAs Mucky Nutz' first entry in the 3D fender market, they wanted to ensure they got it right. The MudGuard has been designed as a fully functional and sharp-looking piece of kit, that keep and mud and spray out of your face, even in the worst conditions. The MudGuard is compatible with most suspension forks, including Boost axle-spacing models and is suitable for 26 , 27.5 & 29 wheels and up to 3 tyres. Safe to say it has the ever-changing industry wheel/tyre size standards under control then! The Guard itself features a forward lip to minimise spray, along with a sharp trailing edge to cut cloggy soil away from your tyre. Despire this and the closer fit, the recessed bridge area means you'll still have plenty of tyre clearance. The wide upper arm profile is also designed to keep mud and dirt away from your fork seals and stanchions, keeping them cleaner and prolonging intervals between services. The MudGuard fits in seconds with the supplied Velcro roll, just like the original Face Fender. Another trait it shares with the Face Fender is the multitude of fastening slots, giving you a wide range of adjustment for different forks, as well as as the possibility of using it as a rear mudguard on some full suspension bikes. With the Short version weighing just 75g, the MudGuard is also super light. Offering excellent coverage and a versatile fitting system, the Mucky Nutz MudGuard is a worthy addition to their range for when you need maximum protection from mud & spray in the worst conditions.
A low cost, yet high quality mudguard, the SKS Commuter's full length design offers maximum protection in adverse weather conditions and is built to withstand years of punishment on a commuter bike.The 3.0mm twin-parallel stainless steel stays are lightweight, strong and provide secure support for the PET plastic guards. Fitting to any bicycle equipped with standard eyelets, the Secu-Clip system features an emergency breakaway function to prevent trapped objects causing spoke damage or locking the front wheel. Supplied fully assembled, the mudguards come complete with a full fitting kit, Allen key, braze on bolts and a snap-fit sliding bridge for the rear. With 3 width options they are suitable for road, hybrid and mountain bike tyre profiles.
A low cost, yet high quality mudguard, the SKS Commuter's full length design offers maximum protection in adverse weather conditions and is built to withstand years of punishment on a commuter bike.The 3.0mm twin-parallel stainless steel stays are lightweight, strong and provide secure support for the PET plastic guards. Fitting to any bicycle equipped with standard eyelets, the Secu-Clip system features an emergency breakaway function to prevent trapped objects causing spoke damage or locking the front wheel. Supplied fully assembled, the mudguards come complete with a full fitting kit, Allen key, braze on bolts and a snap-fit sliding bridge for the rear. With 3 width options they are suitable for road, hybrid and mountain bike tyre profiles.
A low cost, yet high quality mudguard, the SKS Commuter's full length design offers maximum protection in adverse weather conditions and is built to withstand years of punishment on a commuter bike.The 3.0mm twin-parallel stainless steel stays are lightweight, strong and provide secure support for the PET plastic guards. Fitting to any bicycle equipped with standard eyelets, the Secu-Clip system features an emergency breakaway function to prevent trapped objects causing spoke damage or locking the front wheel. Supplied fully assembled, the mudguards come complete with a full fitting kit, Allen key, braze on bolts and a snap-fit sliding bridge for the rear. With 3 width options they are suitable for road, hybrid and mountain bike tyre profiles.