Mudhugger Small Rear MudguardKeeping your rear protected from mud, spray and debris, this mudguard is perfect for 26" hardtail and full suspension bikes as well as most 27.5" wheels on hardtail bikes. This makes it a quick fix for riders who want to upgrade their protection for tackling challenging terrain.Set Includes:FenderZip ties Protective/non-slip tape and instructionsFeatures:Part Number: MMU03Dimensions: Approx. 560mm long, approx. 100mm wide at the widest part, Braces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderWheel Size: Ideal for 26" hardtail and full suspension bikes and most 27.5" wheels on hardtail bikesWeight: Approx. 208g excluding fittingsBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Rear Gravel Hugger MudguardIdeal for gravel riding, wet weather cycling for blasting down muddy routes, the MudHugger Rear Gravel Hugger protects your back from rear wheel spray, gravel and grit.Secure, Strong and LightweightThe Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. See fitting vid below, fitting the new GH is the same as the tried and tested MTB Rear Mudhugger. Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Weight: approx 150gBuy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for bikes without mudguard eyelets, the M Part QDR Mudguards offer excellent coverage in an incredibly quick and easy to fit package. Perfect for bikes without mudguard eyelets and can be fitted or removed in under a minute3.2mm stainless steel stays are highly durable and are quick and easy to assemblePolycarbonate guard material is incredibly tough and virtually unbreakableRubber tail helps to protect riders behind youIncredibly easy to fit, the QDR Mudguards can be fitted or removed in under a minute, perfect for the rare occasions the sun makes an appearance in winter! The durable stainless steel stays and fittings are incredibly durable and will shrug off the worst the winter weather can throw at them. Keeping the elements away are the massively strong polycarbonate guards, which are incredibly tough and virtually unbreakable; they're certainly not afraid of taking abuse from the daily commute! Supplied with all you'll need to get going, the M Part QDR Guards are tough, versatile and incredible value.
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
If you don't like traditional full mudguards then the SKS S-Board and S-Blade Mudguard Set is the perfect solution for keeping you protected during the winter months. With excellent coverage and easy to use mounting system, you'll have no excuses not to head out in the wet!Easy to fit front and rear mudguard setSuitable for road, gravel, adventure and cyclocross bikesSuitable for 700c tyres up to 38mm wideComprising of SKS's popular S-Board Front and S-Blade Rear mudguards, this mudguard set is versatile and great value. The S-Board is a smart clip on front mudguard designed for a maximum of a 38mm wide tyre. Suitable for 700c/28 wheels, the S-Board is mated with the S-Blade rear mudguard for the ultimate in quick fitting protection thanks to its double hinged quick release fitting that even works with aero forks. With the quick release mounting the S-Blade can be fitted in seconds on virtually any bike and the angle can be optimally adjusted to make sure you have the required coverage. If you don't like traditional full mudguards then this mudguard set is the perfect solution for keeping you protected during the winter months.
The SKS Mudrocker Front Mudguard is made of high-performance impact-resistant plastic keeps the focus on the trail and the mud off your face.Made of high-performance impact-resistant plasticMounting with an adapter or hook and loop fastenersIdeal for mountain bikesTube protectionMade in GermanyWeight: 155gLength: 490mmWheel size: 27.5" (650b)", 28", 29 "Tyre width in inches: 2.2"-3.0"Tyre width in mm: 59-76mmLength front fender: 490mmThe mudguard can be quickly mounted on the fork bridge with rubberised, paint-friendly hook and loop fasteners or cable ties and can be removed as quickly. The Mudrocker can also be permanently mounted with a special adapter if threads are present on the fork bridge. The adapter is also compatible with suspension forks with two lateral threaded bushings from the brands Fox, RockShox from model year 2021 and Öhlins. The lateral mounting to the fork legs with hook and loop fasteners or cable ties also ensures high stability. In addition, the tube protection on both sides lets less dirt through to the stanchion tubes. Depending on the suspension fork geometry, this can be adapted using scissors. An adapter and hook and loop fasteners are included.
The Zefal Paragon mudguards are a universal fit so they fit 26'' and 28'' wheels which is great for city and leisure bikes. The mudguards now offer better protection of the rider and following companions by covering more than 80% of the wheel which will no doubt keep everyone happy when your out on a club run! Constructed from technopolymer resin which is extremely durable with U stays which keep the guards rigid so you don't have to worry about them moving or rubbing against the tyre. Both guards offer great protection while the lower extension protects the front derailleur from all the spray that is thrown up while both guards benefit from reflective parts which offer increased visibility in low light conditions.
Designed to help protect your shock, linkages and bearings from getting hammered by mud, dirt and water at high velocity from your back wheel. This helps to minimise cleaning post ride and maximise intervals between services.Key Features:ProGuard REAR’s versatile design allows for easy fitment on a huge range of bikes. ,43 snap-off top holes to fit braces between the seatstays whether they’re straight, rasied or dropped (including those with supporting struts),Indent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike),Side arms designed to fit conventional seatstays (that go to centre of wheel), and offset seatstays (raised up from centre of wheel),Recess to protect sticker allowing you to match your ProGuard FRONT mudguard ,Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength,Same gloss` finish as the ProGuard FRONT. If you prefer a matte finish you can easily do this by spraying it with GT85 (after applying any stickers),6 zip ties are provided,64g,Designed, manufactured and packed in the UK.
The new SKS MUDROCKER FRONT mudguard keeps the focus on the trail – and the mud off your face. The mudguard in a black, matt/shiny design integrates itself perfectly into the mountain bike and promises optimum protection against splashing water due to its length.Product is for front mudguard only
Designed to help protect your shock, linkages and bearings from getting hammered by mud, dirt and water at high velocity from your back wheel. This helps to minimise cleaning post ride and maximise intervals between services. ProGuard rear's versatile design allows for easy fitment on a huge range of bikes43 snap-off top holes to fit straight braces between the seatstays, raised braces, or dropped braces including those with supporting strutsIndent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike)Side arms designed to fit conventional seatstays (that go to centre of wheel), and offset seatstays (raised up from centre of wheel)Recess to protect sticker allowing you to match the sticker on your ProGuard Front mudguardMade of the same thick Polypropylene material used on the ProGuard FrontSame matte textured finish with gloss highlights you see on the ProGuard Bolt On mudguardsZip ties are providedNew for 2023 the ProGuard Rear is now available in two lengths, Mini and Standard. The Mini is the original guard we ve had in the range for a couple of years. The Standard joins the range to offer an extended coverage option. The ProGuard Rear Standard offers an additional 83mm on the rear coverage and 140mm additional length at the front. The material at the front of the guard is made using a slightly thinner material so it can be trimmed to optimise the fit to your specific bike. All RRP mudguards are designed, manufactured and packed in the UK. They are manufactured from a carefully selected Polypropylene designed for durability and optimising the balance of flexibility and stability.
Unmatched protection from mud and spray from the RRP ProGuard V2. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyre clearance and reduces mud clogging unlike other mudguards of this style.Mini: Ideal for good all-year-round good protection that s more discreetStandard: Superb coverage and protectionMax: 21mm longer than standard at the front and 68mm longer at the rear. Offers the very best levels of protectionLonger front minimises high speed sprayFork brace indent allows for greater tyre clearanceSlots and holes for easy installation with cable ties (included) or Velcro straps (sold separately)Rear flick offers even more protection especially whilst corneringSeal protection increased with our acclaimed Seal Shield designCompatible with 26 , 27.5 and 29 forks (reverse arch not compatible) with tyres up to 3 Made with RRP s unique polypropylene mix which gives great flexibility, durability and strengthMatte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protectionDesigned, manufactured and packed in the UKMini: 100g, Standard: 119g, Max: 133g
For 27.5' (650B) Wheel DeFender™ XC11 is a lightweight removable rear fender providing exceptional mud/spray protection. Multiple pivots allow easy fender angle adjustment for a perfect fit while the quick release clamp adjusts to fit ø25.4 - ø34.9 mm seatposts. Advanced high impact plastic is co-molded to a flexible trailing edge for resistance to impacts. Features a highly polished underside to prevent mud buildup and aids in cleaning. ATTACHMENT QR slip joint clamp fits ø25.4 - ø34.9 mm seatposts ADJUSTABLE Multiple angles adjustable MATERIAL Two tone injected high impact resistant plastic ADDED FEATURE Highly polished underside SIZE 62 x 10.2 x 7 cm / 24.4 x 4' x 2.8'' WEIGHT 215 g / 7.57 oz