The new Racing 5 DB wheels are the perfect choice for endurance bikes. The lower aerodynamic resistance and decreased stiffness, achieved with the lower 24 mm U-shaped profile, makes them the ideal technical choice for long rideswithout having to worry about climbing, rain or wind, with a consequent saving in energy and increased comfort. In this case to the aluminium rim has seen an increase in the inner channel width, up to 20 mm from the previous model’s 17 mm, and the addition of the innovative 2 Way Fit system, to comfortably fit 25-28 mm tyres, both clinchers and tubeless (tubeless tape installed and valves included). The aesthetics have undergone the same intervention as the Racing 4 DB model, with the new laser etched graphics, ensuring the long life of their striking design.Key Features:TYRE TYPE2-Way Fit™ Ready (Clincher/Tubeless ready) ,TYRE SIZE700c ,DISCIPLINERoad ,ASTM CATEGORY2 ,WEIGHT1660g ,RIM MATERIALAluminium ,RIM MATERIAL DETAILSAluminium ,PROFILE HEIGHTLow ,RIM HEIGHTFront and rear 24 mm ,RIM WIDTH25 mm ,INNER RIM WIDTH (CHANNEL)20 mm ,BRAKING SYSTEMDisc brake ,BRAKING SURFACE/ BRAKES OPTIONSAFS™ ,FRONT AXLE COMPATIBILITYHH12-100 ,REAR AXLE COMPATIBILTYHH12-142 ,FRONT WHEEL SPOKES24, Left 16 - Right 8 ,REAR WHEEL SPOKES 24, Left 8 - Right 16 ,SPOKES: MATERIALStainless steel ,SPOKES: PROFILE TECHNOLOGYRounded, straight pull ,NIPPLESAluminium ,FRONT HUBAluminium, Aluminium flanges ,REAR HUBAluminium, Aluminium flanges ,BEARINGSSealed cartridge bearings, adjustable ,OTHERSLasered + Stickers ,WEIGHT LIMIT (SYSTEM)120 kg ,FWB VERSIONHG11, XDR, N3W .
Di2 internal cable routing compatible. The EC90 SLX is comprised of advanced carbon construction for Easton's lightest road bar to-date. This handlebar features Easton's new MCD shape technology for a unique ride quality and comfort. TaperWall™ technology and Intelligent Flexibility team up to deliver a perfectly tuned bar that weighs just 195g. Shimano, SRAM or Campagnolo levers can be positioned for a smooth transition on the tops and into the bend, with cables wrapped neatly in the bar's designed recesses. Available in five lengths: 38, 40, 42, 44 and 46 centimetres Key Features: Finish - Matte UD Carbon/Water transfer decals., Weight - 195g (42cm)., Clamp Diameter - 31.8mm., Width (cm) - 38, 40, 42, 44, 46cm., Reach - 80mm., Drop - 125mm., Material - Easton EC90 Carbon. , Rise - No., Bend Type - Compact..
The Cubley 14 only weighs 6.12kg making this one of lightest bikes in the world for it’s price point and specification! Less weight helps smaller riders start easier, accelerate faster and handle the bike with more control.Helping a child learn to ride a bike for the first time is one of the most rewarding experiences of our lifetime. The Cubley 14 is designed to make a child’s transition from balance bike to first pedal bike as easy and enjoyable as possible, without relying on stabilisers. You can easily remove the pedals and then introduce the pedalling element as soon as they feel confident steering and braking.Key Features:Narrow handlebar & shorter stem,Junior specific saddle,Light wheels,Kenda Small Block 8 tyres,Narrow & lightweight aluminium tubing,Fully internal headset.Perfect For:Tarmac,Gravel,Grass.
The perfect combination of lightness, performance and comfortKey Features:Weight: S 122 g - L 129 g,Chassis: Carbon rail (+ 10mm),Dimensions: S 130x248 mm - L 145x248 mm,Category: Performance.
E-MTB-friendly toughness at a budget-friendly price; the H 1900's have long been the choice for EMTB riders looking for improved reliability and the latest versions have been upgraded with Ratchet LN technology to provide even more trouble-free lapsE-MTB's are tough on wheels, really tough, not only is there the added weight and higher maximum drive torque but E-MTB riders tend to ride further and more frequently, this adds up to a real challenge for anyone looking to design a truly durable wheel for long term E-MTB use,The result is DT's mission Hybrid, the first wheel engineering project to look specifically at the challenges of heavy duty E-MTB use for wheels,So, what's changed? the short answer... Everything!,The H 1900's hub shells are oversized to improve overall stiffness and the rear hub contains an 18-tooth ratchet LN freehub system, by far and away the most reliable drive mechanism available at this price point,The sleeved alloy rims have reinforced spoke beds to resist fatigue and handle high loads for long periods of time,The straight pull spokes are custom made for Hybrid with an oversized 2.35 mm hub interface designed to protect one of the key points of stress on any wheel,In order for a wheel to pass as Hybrid certified in DT's inhouse testing lab it has to survive 50% more lifecycles, its spokes and rims have to endure 20% higher load tests and the bearings must be able to handle almost twice the maximum load of a standard wheel,Whilst intended for E-MTB use, the Hybrid range is also ideal for larger riders, bike packers or anyone looking for a really durable wheelset with a high weight limit,Available in a 30 mm internal width to support modern high volume trail rubber,System weight limit: 150KG, Come with DT tubeless rim tape and valves included.
Exceptionally lightweight and well-ventilated full-face protection tailored to the challenges of enduro racing.The ultimate in lightweight full-face protection, the new Otocon is a highly ventilated helmet made for the pressures of enduro. A ventilation design that directs air through the helmet helps keep you comfortable whether racing downhill or giving full effort uphill. Features including a patented breakaway peak, the integrated Race Lock adjustment system and a dual-material liner with parts in multi-impact EPP, work together to extend protection and comfort for all kinds of riding. Removable cheek pads and a removable grill over the mouth give more flexibility to control ventilation, ideal while riding the climbing sections during long enduro races.
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position.The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before.The bike may be the most sustainable transportation ever created, but we need to do more. The saddle’s carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we’re building a more sustainable carbon base.With the Power Pro’s titanium rails, Mirror technology is now more durable than ever. It’s so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It’s the perfect reflection of you.Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber.,Titanium rails.,SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.,Approximate weight: 245g (Size 143mm),Approximate weight: 251g (Size 155mm).
The name Crossmax has a long history in the world of XC riding and racing and this new wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim is welded for added reliability and features a 25mm internal width with a hookless profile.The Infinity lighter hub design optimizes lateral stiffness and spokes tension. Our Instant Drive 360 freewheel with a double ratchet system provides fast engagement and top-level reliability. The rear hub is compatible with Shimano HG9, Micro Spline and SRAM XD driver bodies. The Crossmax is available with 6-bolt or center lock brake rotors in 29” and 27" and is compatible with a 15x110 front axle and 12x148 rear. The wheel is delivered with valves, replacement spokes and accessories.Key Benefits:Light and durable Welded rim construction for: a light and strong rim profile and a a perfectly sealed rimDynamic and agile24 double butted spokes Infinity hub platform ID360 double ratchet freewheel? systemTubeless ready technologyA tubeless rim profile and tubeless tape make it easy to ride tubeless tires for more comfort and control
Strong, reliable and tubeless ready, this modern XC wheel lives up to the legendary Crossmax name.Key Features:Efficient, strong and reliable XC performance.,New wider (25mm internal) sleeved rim design is lighter without compromising strength. 24 straight-pull spokes ensure optimum stiffness and reliability.,Smoother ride, increased traction and a reduced risk of punctures.,UST design and tubeless rim tape makes it easy to set up tubeless ready tires.,Trickle-down technology from high-end Mavic XC wheels.,Reliable ID 360 freehub system and lightweight rim design.,The name Crossmax has a long history in the world of XC riding and racing..This Tubeless Ready wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim design features a 25mm internal width with a hookless profile, a sensible setup for tubeless XC tires.The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by our new ID 360 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with included adapters.
The new Ksyrium 30 Disc is a perfect entry point into high-level race performance. This all-new UST Road Tubeless system delivers a smoother ride and improved puncture resistance while retaining a lightweight feel for climbing and accelerating.By removing the tube, we’ve also removed friction, so there’s less rolling resistance, which means it requires less energy to reach higher speeds.The 30mm deep rim optimizes aero performance and improves stability in crosswinds. The alloy rim benefits from our unrivaled experience creating light yet strong rim extrusions. We do this by carefully tuning the thickness of the rim wall to hit the sweet spot between stiffness, strength and weight.The bladed straight pull spokes are laced to our high-end Infinity hub platforms : optimal spoke tension balance is a guarantee for perfect stiffness and great durability, with only 1 spokes length for both wheels to worry about.The Instant Drive 360 ratchet freewheel system is quick to engage and offers low friction.This hub easily converts from Shimano/SRAM to Campagnolo or XD cassette and is compatible with Center Lock disc rotors.Key Benefits:Light and aero rim?30mm deep profile Optimized rim wall thickness WeldedDynamic and agileDouble butted spokes Infinity hub design ID360 freewheel?Refined tubeless technology helps you roll faster and smoother and is easy to set up and maintain?Optimized UST rim bed shape Durable and perfectly airtight tape system
Based on the legendary Flow rims that have won World Cup DH and Enduro World Series events, Flow S2 wheelsets are a great upgrade for riders looking for better tubeless performance and excellent durability. Patented Bead Socket Technology means easier tubeless inflation and more confidence on the trail. An emphasis on durability means a reinforced and eyeletted spoke bed, a quality sleeved joint, and 6061 alloy construction. A 30mm internal width makes the Flow S2 ideal for 2.3-2.6” tires.Durability, serviceability, and value: every E-sync hub is built around these three priorities. From cromoly steel axles and double row Enduro bearings, to special heat treated steel ratchet rings and a pawl design that reduces stress on freehub and bearings, every detail of the E-sync hub is designed for durability. E-sync hubs are also designed for fast engagement, with four pawls needing only 8.18° of rotation to engage simultaneously and put power to the ground. E-sync hubs are perfect for eBikes and riders who demand stronger components, but still want the fast engagement of a high-performance hub.The Flow S2 wheelset is available with Shimano Micro Spline, HG, or SRAM XDR freehub, with options to fit all popular axle configurations.Tubeless ready with rim tape comes pre-installed. S2 wheels are built to last long, but also be easy to service and update with changing axle and cassette standards. Traditional J-bend spokes and lacing have a proven history of ride quality, durability, and serviceability, and matched S2 wheelsets all use a single spoke length, making it even easier to own and service your S2 wheelset for years. The Flow S2 with E-sync hub is the perfect wheelset for riders who value durability and tubeless performance.Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6 tiresLow-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6” tires,6061 aluminum with sleeved joint and stainless steel rim eyelets,Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal,Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability,E-sync hubs offer fast 8.18° engagement with reinforced pawls,Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs.
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, axle spec of either 9QR, 15x100mm, or 15x110mm, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.Key Features:New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm),New graphics are easy to read and make a fresh impact,Motion Control™ damping featuring low speed compression adjustment to lockout,Fit Tires up to 2.8" (15x110mm, without fenders; the use of a full fender will reduce tire clearance),Fast Black finished 32mm steel upper tubes couple stiffness with a premium look.Specifications:Model designator (SF): RL,Wheel size: 29",Travel (mm): 100mm, 120mm, 130mm,Damper Type: Motion Control,Fork offset: 51mm (29"),Maxle included: Maxle Stealth,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1.5" Tapered,Axle: 15x100mm,Axle to Crown (mm): 505, 529, 539,Brake type (FD): Disc,Crown Material: Forged, hollow aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 32mm straight wall steel,Damper adjust: Crown,Damping adjustments: Extl rebnd, low speed comp to lock,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 755,Max Tire Width (mm): 62,Maximum Rotor Size: 220mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 53,Part Weight (g): 2058.
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, axle spec of either 9QR, 15x100mm, or 15x110mm, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.Key Features:New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm),New graphics are easy to read and make a fresh impact,Motion Control™ damping featuring low speed compression adjustment to lockout,Fit Tires up to 2.8" (15x110mm, without fenders; the use of a full fender will reduce tire clearance),Fast Black finished 32mm steel upper tubes couple stiffness with a premium look.Specifications:Model designator (SF): RL,Wheel size: 27.5",Travel (mm): 100mm, 120mm, 130,,,Damper Type: Motion Control,Fork offset: 42mm (27.5"),Maxle included: Maxle Stealth,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1.5" Tapered,Axle: 15x100mm,Axle to Crown (mm): 486, 506, 520,Brake type (FD): Disc,Crown Material: Forged, hollow aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 32mm straight wall steel,Damper adjust: Crown,Damping adjustments: Extl rebnd, low speed comp to lock,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 710,Max Tire Width (mm): 62,Maximum Rotor Size: 220mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 53,Part Weight (g): 2038.
For the Ultimate, we held nothing back. Our engineers sculpted the finest materials - titanium and carbon fiber - to make this our lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalization is quick and intuitive. And for performance - well, our test riders didn't dub it the "Mini-Code" for nothing.FEATURESMore caliper stiffness and a new pad compound with bite.,Pivot bearings for crisp lever feel and a fatigue-free ride.,SRAM's best power to weight ratio in a four-piston brake..
The Vapour GXC wheelset is the lightest in the Vapour range. Crafted for the longest distance gravel races, ultra-distance adventure riding, XC racing, road plus as well as lightly loaded touring.Built with a 21mm internal width rim the Vapour GXC wheel is ideal for a gravel, road plus and narrower MTB tyres.As well as a lightweight and dependable rim, the Vapour GXC wheels utilise our all new GXC hubs specifically designed for this wheelset. The GXC hubs feature instantaneous 120 point engagement, centre lock, sealed bearings and wide spaced flanges for increased stiffness and durability.We have used non-proprietary J-bend spokes to ensure should the worst happen, you have a great chance of being able to fix your wheel and carry on your adventure.Supplied pre-taped the Vapour GXC is tubeless ready from the box.SpecificationsRims: Vapour,Hubs: GXC Supadrive ,Rim Depth: 22.5mm,Internal Width: 21mm,External Width: 26mm,Front Hub Spacing: 100mm qr and 15mm Thru included (12mm thru adaptor available aftermarket),Rear Spacing: 135 x QR5/10mm and 142 x 12mm Cr-mo tube thru axle,Drillings: 28H front, 32H rear,Disc Mount: Centerlock (optional 6 bolt adaptor available aftermarket).
The CX241 is the culmination of all our experience, advanced materials and shoe making techniques to make a shoe that offers the best fitting solution for any foot type. With a heat moldable heel counter and a uniquely designed upper that has enough adjustability to accommodate feet with any instep height or foot volume without sacrificing comfortOUTSOLELake Race 100% Carbon Fibre SoleUPPERFull grain leather and Nufoam lining. The upper is segmented into 4 independent zones for the most flexible fit to accomodate narrow or wide feet as well as high instep and low instep feet. The mouldable heel counter doubles the heel hold for a secure fitCLOSUREFull grain leather and Nufoam lining. The upper is segmented into 4 independent zones for the most flexible fit to accomodate narrow or wide feet as well as high instep and low instep feet. The mouldable heel counter doubles the heel hold for a secure fitLASTCX Competition
A full-featured bicycle workstand designed and built for the home mechanicThe PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment,Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability,The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach,Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair, The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage, Durable, textured powder coat finish, Integrated height-adjustable parts tray, Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), Maximum weight capacity*: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever, Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) ,Folds down to 45 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs,.
All new for 2019 Sidi Dragon 5 SRS in a stunning Matt finish adding style to performance and durability.Ultra tough build quality suitable for the rigours of MTB and Cross racing the Dragon 5 feature stiffened supportive heel cup and reinforced toe guard and are stud compatible.The Dragon 5 also features a fully re-buildable sole tread and replaceable fastening meaning no matter the abuse you give them they can always come back for more.MICROFIBRA TECHPRO is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high-performance levels. TECHPRO MICROFIBER incorporates features of resistance, stability, lightness, water-repellency and eco-friendliness.The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly centre the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable.SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all-new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment.HIGH-SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable.The reinforced heel keeps the foot in an optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure.In 1999, SIDI revolutionized mountain bike shoe design with the SOLE REPLACEMENT SYSTEM (SRS), owing mountain bikers to replace the most wear-heavy part of the shoe—the sole. The MTB SRS CARBON COMPOSITE Sole consists of four inserts screwed, easily removable and replaceable. In addition, an optional toe guard can be installed using the same screws as the insert. The SRS tread panels and screws are available as spare parts. It is toe spike compatible.
The Sidi Ergo 5 Road Shoe combining great comfort and classy good looks, Techno 3-push fastening and light and stiff carbon fibre sole's make this is a road shoe ideal for racers or long distance cyclists.MICROFIBRA TECHPRO Matt fabric is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high-performance levels. TECHPRO MICROFIBER incorporates features of stability, lightness, water-repellency and eco-friendliness.TECHPRO MICROFIBER has a Hydro and anti-mould treatment, which eliminates the onset of moulds and bacteria. TECHPRO MICROFIBER is Oeko-Tex certified, does not contain harmful substances and respects law restrictions.The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly centre the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable.SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all-new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment.HIGH-SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable.The reinforced heel keeps the foot in an optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure.TWELVE CARBON COMPOSITE sole is made with two different materials blended together, nylon and carbon fibre. It is made out of injected Carbon Fiber in a matrix of Nylon. The Nylon used doesn’t absorb water and doesn’t lose rigidity in hot or humid weather or as it ages. The result is a significantly lighter and stiffer sole.
The Sidi Ergo 5 Road Shoe in Mega wide fitting. This Sidi road shoe has more volume for wider feet or higher arched riders. But manages to combine that with sleek looks and high end features like Techno 3 Push dials a carbon fibre sole and vented captive heel cap.The Sidi MEGA LAST is 4 mm wider across the ball of the foot with more volume, a high instep and a wider heel cup. Mega lasts are EE to EEE width fitting.Key Features:• 4 mm wider across the ball of the foot• More volume, a high instep and a wider heel cup• Mega lasts are EE to EEE widthMICROFIBRA TECHPRO Matt fabric is a microfiber PU Made in Italy. It is considered a highly technological and innovative, eco-friendly leather suitable for technical and sports products which require high-performance levels. TECHPRO MICROFIBER incorporates features of stability, lightness, water-repellency and eco-friendliness.TECHPRO MICROFIBER has a Hydro and anti-mould treatment, which eliminates the onset of moulds and bacteria. TECHPRO MICROFIBER is Oeko-Tex certified, does not contain harmful substances and respects law restrictions.The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly centre the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable.SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all-new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment.HIGH-SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmoveable.The reinforced heel keeps the foot in an optimal position and avoids the shoe being deformed by extreme performance or prolonged pressure.TWELVE CARBON COMPOSITE sole is made with two different materials blended together, nylon and carbon fibre. It is made out of injected Carbon Fiber in a matrix of Nylon. The Nylon used doesn’t absorb water and doesn’t lose rigidity in hot or humid weather or as it ages. The result is a significantly lighter and stiffer sole.