Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed. Weight approx 16g Wheel Size: 26/29 Colour: Black Material: Plastic
Designed and made in the UK from 100% recycled black polypropylene. Following the tried and tested tyre hugging design of our MTB Mudhuggers the GravelHugger is designed to fit most fork + wheel + tyre combo's for your Gravel Bikes. To reduce single use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Suitable for 700c (Max tyre width 42mm) and 650b wheels (Max tyre width 50mm) depending on wheel/tyre/fork combination. Zipties (sold separately) can be utilised if you'd prefer to fit and leave on at all times. Helitape supplied to protect inside of forks where the GravelHugger could scratch the paint. Weight: approx 70g (without fittings) - Length 490mm - width 60mm
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
Trust in these socks featuring the Infiknit fibres that are stronger than the force itself. With lightweight cushioning and a combed cotton blend.
SRAM's UDH Derailleur makes it easier to replace your broken or bent derailleur. Only compatible with frames designed for the UDH hanger - check with your frame manufacturer if unsure.
This is a replacement SRAM Universal Derailleur Hanger (UDH) made by Nukeproof. This hanger is fully compatible for any frame which uses a SRAM UDH hanger including the 2021 Nukeproof Mega & Giga bikes. The UDH is designed to rotate rearward in the event of an impact and features the ability to “re-rail” the chain back onto the small cog The UDH works with all brands of drivetrain, not just SRAM. Please note: If your frame does not currently have a UDH hanger fitted, this will not be compatible
Whether your original derailleur hanger has broken, or you simply want an extra one to keep as a spare, this model is designed for reliable performance. It features a completely re-engineered design that boasts a 100% alloy construction without any plastic, allowing you to benefit from maximum durability. Pilo Engineering has also equipped this version with an anodised coating for additional protection against corrosion during wet riding conditions. Compatible with a wide range of bike manufacturer's listed below, this is an easy to install replacement and it comes complete with mounting hardware. Compatibility This replacement derailleur hanger is compatible with the following bike models: Canyon: 2021 Exceed CF SLX M075-01 Exceed CF SLX 8 Exceed CF SLX 9 2021 Exceed CF M076-01 Exceed CF 5 Exceed CF 5 WMN Exceed CF 6 Exceed CF 7 Exceed CF 7 WMN 2021 Exceed CFR M112-01 Exceed CFR LTD Exceed CFR Team 2021 Lux CF SLX M063-01 Lux CF SLX Frameset MVDP 2021 Spectral CF M121-01 Spectral 29 CF 7 Spectral 29 CF 8 Spectral 29 CF 9 Spectral 29 LTD Orbea: 2021 Oiz OMX 2021 Alma OMR 2021 Alma OMX Santa Cruz: 2021 5010 V4 Specialized: 2021 Stumpjumper Evo Transition: 2021 Patrol Trek: 2020 2021 Procaliber 9.7 2020 2021 Fuel EX 9.9 ABP 2020 2021 Rail 9.8 2021 Powerfly FS 4 2021 Rail 9.7 2021 Rail 7 2021 Rail 9.9 XTR 2021 Powerfly FS 9 Equipped 2021 Rail 9.9 X01 AXS 2022 Session 8 GX, Session 9 X01, Session 9.9 29 er Whyte: 2021 E-150 S 29ER, E-150 RS 29ER, G-180 S, G-180 RS, G-180 RS 29ER, G-180 WORKS 29ER, T-160 S, T-160 RS Yeti: 2021 ACR YT: 2021 Capra MK3 Manufacturer's Part Number: D798
High-quality replacement Nukeproof spare parts.
Mudhugger Front Mudguard ExtenderThis mudguard extender is engineered to be easy to fit and can be removed when not required. It uses plastic pop rivets to attach and no drilling is needed with the Mudhugger FRX or ShortyX. This front extender makes the back of your Hugger 105mm longer. Features: Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed Weight approx 16gBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Small Rear MudguardKeeping your rear protected from mud, spray and debris, this mudguard is perfect for 26" hardtail and full suspension bikes as well as most 27.5" wheels on hardtail bikes. This makes it a quick fix for riders who want to upgrade their protection for tackling challenging terrain.Set Includes:FenderZip ties Protective/non-slip tape and instructionsFeatures:Part Number: MMU03Dimensions: Approx. 560mm long, approx. 100mm wide at the widest part, Braces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderWheel Size: Ideal for 26" hardtail and full suspension bikes and most 27.5" wheels on hardtail bikesWeight: Approx. 208g excluding fittingsBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Rear Gravel Hugger MudguardIdeal for gravel riding, wet weather cycling for blasting down muddy routes, the MudHugger Rear Gravel Hugger protects your back from rear wheel spray, gravel and grit.Secure, Strong and LightweightThe Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. See fitting vid below, fitting the new GH is the same as the tried and tested MTB Rear Mudhugger. Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Weight: approx 150gBuy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.