MudHugger Front Gravel Hugger MudguardThe Front Gravel Hugger is a gravel bike-specific mudguard that protects you from trail debris flicking up, water splashing over you and anything else your tyres may kick up towards you. Wide Gravel Bike MudguardFollowing the tried and tested tyre hugging design of the MTB Mudhuggers, the GravelHugger is designed to fit most fork, wheel and tyre (up to 50mm wide) combos for your gravel bikes. To reduce single-use plastic waste and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be used if you'd prefer to fit the guard and leave on your bike at all times. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Fork Compatibility: Suits all solid 650b and 700c forks Includes O rings for non-permanent installation Weight: 150g (approx)Buy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Ziptie Clip-On Front MudguardThe EVO Ziptie Front Mudguard from Mudhugger is a stiff and durable mudguard that's held in place with zip ties. And, it's ideal for use with downhill (DH) and enduro bikes in all weather and trail conditions.Are you ready? The world's fastest mudguard is evolving, the Mudhugger EVO Ziptie, designed with the help of DH World Cup and EWS racers. With the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost (not reverse fork brace forks though). Optimum length, not too short, no longer than needed. Plus, it features a subtle kicker to keep the length as short as possible without compromising spray protection and is strong enough for DH racing at the highest level. Features: Length: 515mm - Rear extension 330mm, front extension 185mm Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full compression 100% recycled PP Designed, made and packed in the UK Weight: 120g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Bolt-On Front MudguardThe Mudhugger Shorty EVO is a shorter variant of the Mudhugger EVO mudguard/fender that's compatible with modern mountain bike (MTB) suspension forks.The Mudhugger EVO is designed around the latest Fox 36 and 38's and Rockshox Zeb (not compatible with 38mm offset Zeb) to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for Zeb, see options) but still compatible with older (2017) onwards Fox forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Also compatible with Ohlins RXF and Downhill (DH) forks (adapter bracket required, see options). Please Note: For all Downhill forks see the options for FOX and Ohlins DH version. Features: Length: 400mm total - Rear extension 265mm, front extension 105mm Weight: 105g, without fittings Bolts directly to the back of the fork brace. Default FOX kit supplied with rubber pads, bolts, washers and hex key to install to your Fox forks. For RockShox Zeb and Ohlins an Adapter Pack is required, sold separately Shorty version of the Long EVO More mud clearance No more crown fouling at full-compression Subtle kicker to keep length as short as possible without compromising spray protection 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Shorty EVO Ziptie Front Mudguard The Mudhugger Shorty EVO Ziptie is an easy to install mudguard/fender that's compatible with modern suspension forks. Ideal for downhill (DH), enduro and trail riding, this mudguard keeps trail spray and mud away from your face, so you can focus on the ride.The Shorty Mudhugger EVO Ziptie was designed with the help of DH World Cup and EWS racers. The Mudhugger Shorty EVO Ziptie is designed around the latest Fox 36 and 38's and RockShox Zeb to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. Features: Length: 400mm - Rear extension 265mm, front extension 105mm Weight: 100g, without fittings Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full-compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UKBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof SRAM Universal Derailleur Hanger UDHThe SRAM Universal Derailleur Hanger UDH from Nukeproof is a replacement derailleur gear hanger that's compatible with any frame that uses the SRAM UDH standard.This is a replacement SRAM Universal Derailleur Hanger (UDH) made by Nukeproof. This hanger is fully compatible for any frame which uses a SRAM UDH hanger including the 2021 Nukeproof Mega & Giga bikes. The UDH is designed to rotate rearward in the event of an impact and features the ability to “re-rail” the chain back onto the small cog The UDH works with all brands of drivetrain, not just SRAM. Please note: If your frame does not currently have a UDH hanger fitted, this will not be compatible Features: Genuine Replacement SRAM UDH Gear Hanger from Nukeproof Fully compatible with any frame which uses a SRAM UDH hanger The UDH works with all brands of drivetrain, not just SRAMBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof SRAM UDH Alloy Tough HangerThe SRAM UDH Alloy Tough Hanger from Nukeproof is an upgraded version of the highly popular and convenient UHD rear derailleur hanger. Manufactured using tough 7075 T6 alloy and no plastic parts whatsoever, this updated hanger is robust and reliable while also still being very lightweight.Durable and Lightweight Alloy UDH Derailleur HangerThe same UDH Hanger but tougher, this updated hanger still fits your UDH equipped bike but is now manufactured fully from aluminium alloy. The current UDH hanger from SRAM has plastic components and most UDH equipped bikes will have this co-moulded plastic / alloy hanger. If you are looking for a more durable option to keep your days riding going after a derailleur strike, then this hanger is a fitting upgrade. This hanger is manufactured from durable 7075 T5 alloy, has no co-moulded plastic and still retains a sensible weight. Also, this hanger is fully compatible with any frame which uses a SRAM UDH hanger including the 2021 Nukeproof Mega, Megawatt & Giga bikes. The UDH is designed to rotate rearward in the event of impact and features the ability to “re-rail” the chain back onto the small cassette cog The UDH works with all brands of drivetrain, not just SRAM. Please note: If your frame does not currently have a UDH hanger fitted, this will not be compatible Features: Material: 7075 T6 Alloy Genuine Replacement SRAM UDH Gear Hanger from Nukeproof Fully compatible with any frame which uses a SRAM UDH hanger The UDH works with all brands of drivetrain, not just SRAM Weight: 26g approxBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Pilo Engineering Replacement Sram UDH Derailleur Hanger -This derailleur hanger features a completely re-engineered design that boasts a 100% alloy construction without any plastic, allowing you to benefit from maximum durability. Pilo Engineering has also equipped this version with an anodised coating for additional protection against corrosion during wet riding conditions. Compatible with a wide range of bike manufacturer's listed below, this is an easy to install replacement and it comes complete with mounting hardware. Whether your original derailleur hanger has broken, or you simply want an extra one to keep as a spare, this model is designed for reliable performance.Features: Material: 6061 T6511 ASTM B221 billet Aluminium Finish: Anodised coating Axle Thread: M12x1mm 100% Alloy construction - no plastic Manufactured using CNC technology Mounting Hardware Included: YesCompatibility:This replacement derailleur hanger is compatible with the following bike models: Canyon: 2021 Exceed CF SLX M075-01 Exceed CF SLX 8 Exceed CF SLX 9 2021 Exceed CF M076-01 Exceed CF 5 Exceed CF 5 WMN Exceed CF 6 Exceed CF 7 Exceed CF 7 WMN 2021 Exceed CFR M112-01 Exceed CFR LTD Exceed CFR Team 2021 Lux CF SLX M063-01 Lux CF SLX Frameset MVDP 2021 Spectral CF M121-01 Spectral 29 CF 7 Spectral 29 CF 8 Spectral 29 CF 9 Spectral 29 LTD Orbea 2021 Oiz OMX 2021 Alma OMR 2021 Alma OMX Santa Cruz: 2021 5010 V4 Specialized: 2021 Stumpjumper Evo Transition: 2021 Patrol Trek: 2020 2021 Procaliber 9.7 2020 2021 Fuel EX 9.9 ABP 2020 2021 Rail 9.8 2021 Powerfly FS 4 2021 Rail 9.7 2021 Rail 7 2021 Rail 9.9 XTR 2021 Powerfly FS 9 Equipped 2021 Rail 9.9 X01 AXS 2022 Session 8 GX, Session 9 X01, Session 9.9 29 er Whyte: 2021 E-150 S 29ER, E-150 RS 29ER, G-180 S, G-180 RS, G-180 RS 29ER, G-180 WORKS 29ER, T-160 S, T-160 RS Yeti: 2021 ACR YT: 2021 Capra MK3 Manufacturer's Part Number: D798Buy Pilo Engineering Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Mega Carbon Mountain Bike UDH Stop BoltThe Mega Carbon UDH Stop Bolt is a replacement stop bolt from Nukeproof that's compatible with the 2021-2022 Mega and Giga Carbon Frame.Features: Genuine Nukeproof Spare Parts Part Number: 1x FB-GAN-127 - UDH Stop Bolt Compatibility: 2021-2022 Mega and Giga Carbon FrameBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Medium Rear MudguardProtect yourself from mud and spray with this rear mudguard from Mudhugger. Designed for 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degrees, this is a helpful option for protecting yourself from unwanted mud spray when tackling tough terrain. The Medium Rear Mudhugger is nearly identical to the Small Rear Fender, but 80mm longer. This longer version is ideal for most 27.5 full-suspension frames. And 29” hardtail bikes.If your bike has seat stay angles 28- 31 degrees then the Medium Rear Mudhugger is probably the best choice, this applies to the vast majority of bike designs. Think Cannondale, Whyte, Lapierre, Transition, Rose, Commencal, Calibre, Kona, GT, Canyon, Giant and Marin.The rear fender braces are designed to be custom cut around cable stops/guides and other unique seat stays/swingarm shapes and features. Some frames have asymmetrical stays, like found on EVIL bikes, and may not fit or will require extensive customization to fit.Kit includes fender, zip ties and protective/non-slip heli tape.Features:Ideal for most 29" and 27.5+ full-suspension bikes with seat stay angles above 27 degreesApprox. 640mm longApprox. 100mm wide at the widest partBraces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.