Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed. Weight approx 16g Wheel Size: 26/29 Colour: Black Material: Plastic
Designed and made in the UK from 100% recycled black polypropylene. Following the tried and tested tyre hugging design of our MTB Mudhuggers the GravelHugger is designed to fit most fork + wheel + tyre combo's for your Gravel Bikes. To reduce single use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Suitable for 700c (Max tyre width 42mm) and 650b wheels (Max tyre width 50mm) depending on wheel/tyre/fork combination. Zipties (sold separately) can be utilised if you'd prefer to fit and leave on at all times. Helitape supplied to protect inside of forks where the GravelHugger could scratch the paint. Weight: approx 70g (without fittings) - Length 490mm - width 60mm
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
Mudhugger Front Mudguard ExtenderThis mudguard extender is engineered to be easy to fit and can be removed when not required. It uses plastic pop rivets to attach and no drilling is needed with the Mudhugger FRX or ShortyX. This front extender makes the back of your Hugger 105mm longer. Features: Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed Weight approx 16gBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Small Rear MudguardKeeping your rear protected from mud, spray and debris, this mudguard is perfect for 26" hardtail and full suspension bikes as well as most 27.5" wheels on hardtail bikes. This makes it a quick fix for riders who want to upgrade their protection for tackling challenging terrain.Set Includes:FenderZip ties Protective/non-slip tape and instructionsFeatures:Part Number: MMU03Dimensions: Approx. 560mm long, approx. 100mm wide at the widest part, Braces are approx. 140mm longCompatible with Mudhugger's 100mm rear extenderWheel Size: Ideal for 26" hardtail and full suspension bikes and most 27.5" wheels on hardtail bikesWeight: Approx. 208g excluding fittingsBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Rear Gravel Hugger MudguardIdeal for gravel riding, wet weather cycling for blasting down muddy routes, the MudHugger Rear Gravel Hugger protects your back from rear wheel spray, gravel and grit.Secure, Strong and LightweightThe Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. See fitting vid below, fitting the new GH is the same as the tried and tested MTB Rear Mudhugger. Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Weight: approx 150gBuy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
MudHugger Front Gravel Hugger MudguardThe Front Gravel Hugger is a gravel bike-specific mudguard that protects you from trail debris flicking up, water splashing over you and anything else your tyres may kick up towards you. Wide Gravel Bike MudguardFollowing the tried and tested tyre hugging design of the MTB Mudhuggers, the GravelHugger is designed to fit most fork, wheel and tyre (up to 50mm wide) combos for your gravel bikes. To reduce single-use plastic waste and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be used if you'd prefer to fit the guard and leave on your bike at all times. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Fork Compatibility: Suits all solid 650b and 700c forks Includes O rings for non-permanent installation Weight: 150g (approx)Buy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Mudguard Adaptor KitThe EVO Bolt-On Mudguard Adaptor Kit from Mudhugger is compatible with the Mudhugger EVO Bolt-On mudguard and enables it to fix a selection of Ohlins and RockShox Zeb suspension forks.Features: Mudhugger Evo Bolted Adapter Kit For: Ohlins Rxf36 27.5 Ohlins Rxf 29 Ohlins Dh38 Fit With Adjustment Part Number: MMU11 (Ohlins) MMU10 (RockShox Zeb)Buy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Ziptie Clip-On Front MudguardThe EVO Ziptie Front Mudguard from Mudhugger is a stiff and durable mudguard that's held in place with zip ties. And, it's ideal for use with downhill (DH) and enduro bikes in all weather and trail conditions.Are you ready? The world's fastest mudguard is evolving, the Mudhugger EVO Ziptie, designed with the help of DH World Cup and EWS racers. With the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost (not reverse fork brace forks though). Optimum length, not too short, no longer than needed. Plus, it features a subtle kicker to keep the length as short as possible without compromising spray protection and is strong enough for DH racing at the highest level. Features: Length: 515mm - Rear extension 330mm, front extension 185mm Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full compression 100% recycled PP Designed, made and packed in the UK Weight: 120g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.