Key Features:9, 10, 11, & 12spd eagle - these chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed eagle and 12 speed kmc chain. They do not work with shimano 12 speed hyperglide+ chain or sram 12 speed flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
The Wolf Tooth Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch™ system crankset.,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: Standard Offset 49mm for 26-34t, 51mm for 36t (additional chainstay clearance),Chainline: Boost Offset 52mm .
Built To Prevent Chain Drop On Tough And Muddy Routes,Easily Adjustable And Simple Chain Removal,Machined From 6061-t6 Aluminium,.CompatibilityDesigned To Fit On Any Bike With An Integral Braze-on Mount. If You Have A Round Seat Tube With No Braze-on Mount, You Can Buy A Braze-on Adapter.,Primed For 6mm-51mm Chain Lines And 34t-46t Round Or Oval Chainrings,Required A Minimum Distance Of 10mm Between Crank And Centre Of The Ring,Optimised For Use With Both Elliptical And Round Chainrings.,For 1x Use Only.
Key Features:Built to prevent chain drop on tough and muddy routes,Easily adjustable and simple chain removal,Machined from 6061-t6 aluminiumCompatibility:,Designed to fit on any bike with a high direct mount,Primed for 48mm and 54mm chain lines and 28t - 36t round or oval chainrings,Required a minimum distance of 10mm between crank and centre of the ring,Optimised for use with both elliptical and round chainrings.,For 1x use only.
The wolf tooth stainless steel single speed cog utilises extra tall teeth for reliable chain retention when using a chain tensioner. Fitting perfectly onto any shimano freehub, this cog is optimised for 9, 10 or 11-speed chains but will work with all chains.Machined in-house at wolf tooth's Minnesota hq from ultra-durable heated treated and electropolished 416 stainless steel, this is a remarkable exercise in top-tier precision engineering. If you're looking for a single speed cog to outlast all others, this is a sure bet.Compatibility:These will fit on any shimano-type freehub spline (geared or single speed),Designed to work with any chain,Tooth width optimized for 9-,10-, and 11-speed chains.
Specification: 22 Clamp-ISII is for a Shimano I-SPEC II shifter mounting directly to a handlebar,22 Clamp-ISEV is for a Shimano I-SPEC EV shifter mounting directly to a handlebar.
Wolf Tooth ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. If you value seamless drivetrain integration and want to make efficient use of handlebar space then this is a great addition to your ride.Mount Type:MM-ISII is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec II brake,MM-ISEV is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec EV brake,ISEV-ISB is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec B brake,ISEV-ISII is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec II brake,MM-MAG is for a SRAM Matchmaker shifter mounting to a Magura brake.Compatibility:Designed to work with rear (right side) brakes and shifters.,Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.,Shimano I-spec A, Hope, and TRP brakes are not supported.,Shimano I-spec EV to Magura brakes is not supported because of geometric challenges..
Specification: ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake.
Wolf Tooth Centerlock Rotor Lockrings secure centerlock rotors on centerlock hubs. They are compatible with 12mm, 15mm, and 20mm thru axles and QR. These are available in eight colours that match other Wolf Tooth anodized colour accents for headsets, bolts, seatpost clamps, and more. Centerlock Rotor Lockrings are made with 7075-T6 aluminium and machined at Wolf Tooth in Minnesota, USA.Wolf Tooth Centerlock Rotor Lockring are 4mm thick with a 44mm outside diameter. Make sure you have enough clearance to the frame or fork.Key Features:Compatible with 12mm, 15mm, and 20mm thru axles and QR,40Nm Max Torque,Can be installed with Wolf Tooth Pack Wrench.
Machined from 7075-T6 Aluminium at Wolf Tooth’s HQ in Minneapolis, USA, these water bottle cage bolts are beautifully crafted to top-tier standards. If you’re looking to adorn your bike with precision engineered components down to even the finest details, these are an ideal choice. Available in M5 x15mm in a raft of colours.
The Wolf Tooth B-Rad Bottle Shift mount is designed to offset a bottle to a more optimal location on your MTB, or simply introduce more mounting options on your road or gravel bike.Commonly, dual suspension frames have awkward bottle mount positions that interfere with the top tube or shock. By shifting the bottle position off centre and tilting it outward, while providing up to 18mm of centreline adjustment, the B-Rad Bottle Shift improves clearance and avoids this problem. On some full suspension bikes, it may not be possible to fit a bottle at all under the frame shock without this offset.Many brackets for mini pumps don’t clear the frame on mountain bikes, but the B-Rad Bottle Shift also offsets pump bracket mounting holes allowing the mounting of mini pumps on most mountain bikes. Key Features: Allows you to move a bottle mount or mini pump mount to the optimal position,Made from aluminium with stainless mounting hardware,Weight 24g,Maximum load 1700g,Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts,Made in the USA.
The B-RAD Everywhere Base is a all-rounds mount that allows riders to add a bottle cage where there is not a mount on the frame. The Everywhere Base can function as a B-RAD base, offsetting existing bottle cage bosses by up to 22mm to make room for frame bags, piggyback shocks, or other accessories. The B-RAD Everywhere Base 2 is ideal for standard water bottle cages and the B-RAD Everywhere Base 3 is ideal for cargo cages that use three bolts.Bases are the foundation for the B-RAD System which allows you to mount accessories. Compatible with most bike frames and seat posts.Key Features:Silicone-backed hook-and-loop straps keep base securely in place,Lightweight, durable, rustproof aircraft-grade aluminium with ED-coated hardware,Hardware includes bolts with T25 Torx head, two silicone-backed straps, and foam pads with adhesive backing.,Length: Everywhere Base 2 (10cm), Everywhere Base 3 (14 cm),Strap Length: 30cm (12") can be trimmed to length as needed,6061-T6 aluminium brackets | EVA foam pads.