The SRAM NX rear derailleur provides the same smooth, reliable shifting action as SRAM’s XX1 model - from the larger upper pulley offset to the 12-tooth X-SYNC™ pulley wheels. By eliminating unwanted chain movement, its X-Horizon™ cage shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock™ technology, wheel removal and installation are easier than ever. Technologies: Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place Roller Bearing Clutch: Roller Bearing Clutch (RBC) rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With RBC technology, derailleur bounce and chain slap are eliminated without sacrificing precision X-Actuation: Developed specifically for SRAM 1X, X-Actuation keeps shifting sharp and consistent across the entire 10 to 42-tooth cassette X-Horizon: The X-Horizon rear derailleur’s ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears
Built for precise and swift shifting across SRAM's wide-range 11-speed cassette, the SRAM NX 11 speed shifter brings industry-changing technology to everyone.
The SRAM Force rear derailleur represents the same design philosophy that has yielded SRAM’s best-in-class products for the mountain bike (MTB) market. It takes advantage of Exact Actuation, an actuation ratio that delivers precise 3mm shifts in every gear along with the widest range of adjustments available, delivering the best 10-speed performance in the sport. Crafted with cutting-edge materials, the SRAM Force rear derailleur - 10 speed model includes a carbon fibre outer cage and a magnesium inner link. The final result is an impressively lightweight unit that tips the scales at only 174g. Technologies: Exact Actuation™: Simplified and stabilised shifting over tight cog spacing found on modern cassettes. By using exact cable tension, the end result is the easiest index shifting system to set up and it stays that way.
SRAM’s own wireless technology provides a secure connection and the removable battery has a 1000km range. So, if you forget to top up your battery and it runs low miles from home, simply swap it over with the front derailleur's battery to get back on the road with a full cassette range. It also benefits from the same quality construction of the mechanical SRAM Red version, featuring ceramic pulley bearings, a carbon cage, and an anodised alloy body. Technologies: AIREA™ - Utilizing 128-bit encryption, eTap® shift signals are transmitted and received in accordance with SRAM’s proprietary wireless protocol known as AIREA. Each time an eTap groupset is paired, a new encryption code is generated and assigned to the components in this group to ensure complete shifting security. eTAP - All of the underlying tech in the SRAM RED® eTap groupset such as wireless shifting, advanced battery power management and mechatronics technologies are all meant to serve one ultimate purpose, to facilitate the most intuitive and consistent shifting available. This shift logic is called eTap. Right lever makes it harder, left lever makes it easier, both levers shift the front derailleur. Simple, unmistakable, and intuitive. Exact Actuation: When SRAM launched their road technology from scratch they reapplied their MTB proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.
The X.4 line-up sets the standard for recreational level shifting. An intelligent blend of performance and value for MTB or pavement. An ergonomic designs platform allows for simplistic control and a two-lever design has been introduced, modeled after SRAM's highest performance trigger shifters.
Alternative cable routing options allow for both brake and shifter cables to run along either side of the handlebar for optimum rider comfort. SRAM Rival also incorporates the popular reach adjust feature, which SRAM invented, and allows riders to customise their brake and shift levers. Now every rider has a choice on positioning their DoubleTap® levers. Weight: 320g Technologies: DoubleTap® shifting - this makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. With short, rapid taps the transport pawl moves the ratchet wheel and up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximised 15° angle) with the holding pawl and the transport pawl leapfrogging each other quickly and smoothly. Exact Actuation™: When SRAM launched their road technology from scratch they reapplied their MTB proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way ZeroLoss™: Simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle ground where you're waiting for the shift to come. Gear changes are instant and precise
The new SRAM Force 22 ErgoDynamic™ Shifters were modeled after the best in class comfort of SRAM RED, and represent the most advanced thinking yet on perfecting the interface between rider and bike. Everything received the same detail, including the transition between handlebar and hoods, the grip texture, finger wrap, and the separate interfaces with both the shifter and brake lever. The understated black finish makes it look fast and a perfect match for any machine. Weight: 307g (Pair)
With many of the world's top teams ‘Making the Leap’ to SRAM, there is little doubt that wins at the Classics, Grand Tours, Ironman(™), and Cross Worlds were due in part to the lightest, most efficient, and ergonomic road componentry ever made. Technologies: Yaw™: The front derailleur cage rotates to maintain a consistent angular relationship with the chain. Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct, more precise, and combined with the new Red crankset and chainrings, delivers an unmatched performance advantage in front shifting
Extremely strong. Incredibly precise, the SRAM PC850 8 speed chain increases front and load shifting performance without sacrificing rear shifting precision. The Step2 riveting process also increases the Push Pin Power for increased strength and durability. Technologies: - An equally smooth operator on city bike paths and country trails. - PowerLink "no weak link" technology lets you insert, press, and lock to join links. No tools needed. - GLEITMO — biking's best chain lubricant — coats chain for superior protection against friction and dirt. - ISO 4210 compliant. See Declaration of Conformity for details. Manufacturer's Part Number: CN-850-A1
Ideal for BMX use, this SRAM PC1 nickel single speed chain features 114 nickel-plated links and includes a Snap Lock two-piece connector link for a solid and reliable performance from start to finish. This SRAM PC1 is a nickel-plated 1/8" chain designed for single speed use only.
The performance of the SRAM 11 speed MTB cassette is optimised by its tooth profile and shift ramp design for quick and positive index shifting. It shifts efficiently and positively in all high performance situations. The updated design features a semi-spidered construction for a maximum stiffness to weight ratio. This road bike cassette is compatible with PC 1170 and PC 1130 11 speed chains. You can also personalise your wide range gearing with one of eight available X-SYNC™ chainrings.
The SRAM X1 11 speed chain comes from a long line of dependable, lightweight chains that are built for toughness. Designed with SRAM’s trusted XX1 geometry, the PC-X1 features solid pin construction, 11-speed PowerLock and smooth, efficient shifting that you can count on every time out. PowerLock: SRAM chain engineers developed PowerLock as a tool free, sure and consistent way to connect our 11 speed chains. While PL does not require special tools for install, the especially tight tolerances of 11 Speed drive trains mandated that each PowerLock is good for a one-time application only. X-SYNC: SRAM X-SYNC 1X chain rings provide the highest level of performance and durability. The SRAM X-SYNC™ tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC™ chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC™ rings are an integral part of the SRAM 1X™ drivetrain.