Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Crown Race Setting ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Includes: Setting Tube with One 1.5" setting insert for installing the crown race used on 1.5” headsets Use a hammer and tap the end cap on the tube to seat the race into its proper place.Buy LifeLine Crown Race Setting Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Crown Race Setting ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Includes: Setting Tube with One 1.5" setting insert for installing the crown race used on 1.5” headsets Use a hammer and tap the end cap on the tube to seat the race into its proper place.Buy LifeLine Crown Race Setting Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Performance 57mm Drop Brake Caliper SetEnjoy exceptional braking with this Drop Brake Caliper Set from Miche. Featuring a lightweight, hard-wearing alloy construction and a dual-pivot design, this set is the ideal choice for reliable, enhanced braking.Features:Special steel chrome-plated screws and nutsHeat-treated steel pivotsLightweight alloyDual pivotBrake Type: V-BrakeDrop: 41-57mmWeight: 325gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope IS 41/52 Complete HeadsetThe IS 41/52 Complete Headset from Hope is an integrated headset design for bike frames with headtube internal diameter of 41mm upper and 52mm lower. Also, it's ideal for tapered fork steerer tubes.Hope headsets use custom made, replaceable stainless-steel bearings to resist corrosion. And, sealing is achieved through an adjustable taper ring cover and integrated rubber seal.Features: High-quality Hope headset Type: Integrated (IS) Bearing Outer Diameter: Upper: 41mm; Lower: 52mm Use: Mountain BikeBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Acros ZS56 Headset Upper Integrated Cable RoutingKeeping your cables hidden while also giving you a hassle-free, clean finish, this semi-integrated headset upper (ZS56) is developed specifically for bike frames with a 56mm head tube at the top and integrated cable routing (ICR). It can also only be used in combination with a matching headset cover (ZS56 headset cover) for integrated cable routing. The headset upper part includes a ZS56 bearing cup, a matching angular contact ball bearing and a special compression ring for ICR. Another highlight is it comes complete with Acros's internal protection sealing (IPS) for an additional layer of protection for the headset bearings against moisture and dirt.Designed for Integrated Cable RoutingThe zs56 upper part of this headset with ICR is the result of long development work so that you can easily install it and have a long rest. This is ensured by a double-sealed angular contact ball bearing that Acros fill with its optimised headset grease. Thanks to the two sealing disks with double lip seals, the grease is securely held inside the industrial ball bearing and moisture and dirt cannot penetrate the bearing.High-Quality Angular Contact Ball BearingsAcros use special angular contact ball bearings in its aftermarket headsets. They can cope with the radial and axial forces occurring on the head tube particularly well and therefore contribute to the long service life of the headset.Sophisticated Sealing TechnologyA number of seals effectively keep moisture and dirt away from the heart of this headset and its angular contact ball bearings. This means less maintenance as well as increased longevity on your travels.Features: Bearing Diameter Upper Part (ID): 56mm Steerer Tube (SD): 28.6mm / 1 1/8" Bearing Dimensions: 52x42x7 Storage Height: 7mm Bearing Bevel: 45 degrees/ 45 degrees Headset Cover Included: No, Acros ZS56 headset cover is available separately Double-sealed angular contact ball bearings Centering ring made of glass fibre reinforced plastic Metal reinforced sealing washer Weight: 35gTechnologies: Does the zs56 upper part for integrated cable routing (icr) fit into my bike? This storage set with integrated cable routing only fits into your bike if this was already provided for by the manufacturer at the factory. In addition, the upper head tube diameter must be 56mm. What is included in the scope of delivery of the zs56 upper part for integrated cable routing (icr)?: 1x 52x42x7 headset bearing pressed into bearing shell (ID: 56mm), 1x centering ring and 1x metal reinforced seal.Buy Acros Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wera Tools Bicycle Set 4 L-Key ToolsetIdeal for tightening and loosening bolts commonly found on bikes, the Bicycle Set 4 L-Key Toolset from Wera Tools are high-quality tools that offer precise and reliable tuning whatever the component or job required. Strong, corrosion-resistant and colour-coded for your convenience, these tools are a dependable addition to any workshop or home toolbox.Tool specialist Wera presents Bicycle Set 4, a compact 9-piece L-Keys set for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for road bikes, mountain bikes (MTB) and electric bikes (E-Bikes). This set really stands out from your average set of Allen keys because it features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify with L-Key you need for the job. The plastic sleeving on the L-Keys makes them comfortable to use, even in low temperatures.The Ball Head end of each L-Key makes it easy to use these Keys in hard-to-reach areas of your bike. These L-Keys also feature Wera's Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. The L-Keys fit securely into the storage clip which is made of solid rubber, giving easy removal and no wear to the coloured plastic sleeves of the keys or size markings. Features: 2 x Hex-Plus 950 SPKL L-Keys (2mm, 2.5mm) 5 x Hex-Plus 950 SPKL HF L-Keys (3mm, 4mm, 5mm, 6mm, 8mm) 2 x TORX 967 SXL HF L-Keys (TX10, TX25) 1 x Lightweight and robust folding fabric pouch Size: 220mm x 100mm x 40mm Set Weight: 484gBuy Wera Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
microSHIFT R8 3x8 Speed Dual Control Lever SetThe microSHIFT R8 Dual Control Levers are ideal for use with a 3x8-Speed road drivetrain. Also, these shifters are compatible with Shimano 8-Speed components and function optimally with triple chainsets.Key Features: Dual Control Levers for 3 x 8 Speed Outer cable route design Anodized forged Aluminium brake lever; Resin Steel Shift Lever Shift & Go Technology implemented: Shift-Up Max. 3 gearsFeatures: Series: R8 Model No.: SB-R483 Handle Bar Type: Drop Bar Cassette Compatibility: 8 Speed Front Shifting: Triple Bracket Material: Engineering Composite Brake Lever Material: Anodized Forged Aluminium Shift Lever Material: Resin Steel Trimming Function for Front: Y Replaceable Hood Cover: Y-SB02 / Y-SB03 / Y-SB04 Clamp Band: 23.8 - 24.2mm Shift Cable: Stainless Slick Weight: 430g Compatibility: Shimano 8 Speed Road Shifters CompatibleBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.