These workshop quality tools are made from chrome vanadium steel making them tough and durable so they last a lifetime of use.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
The Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding. Wave Tech Chainrings Tough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions. Press Fit BB-90 Bottom Bracket This chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Manufacturer's Part Numbers: 89222991 Black 36/22T 165mm 89222990 Black 36/22T 170mm 89222992 Black 36/22T 175mm
Strong, corrosion-resistant and colour-coded for your convenience, these tools are a dependable addition to any workshop or home toolbox. Tool specialist Wera presents Bicycle Set 4, a compact 9-piece L-Keys set for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for road bikes, mountain bikes (MTB) and electric bikes (E-Bikes). This set really stands out from your average set of Allen keys because it features Wera's Take it Easy colour coded tool size finder system, meaning it's quick to identify with L-Key you need for the job. The plastic sleeving on the L-Keys makes them comfortable to use, even in low temperatures. The Ball Head end of each L-Key makes it easy to use these Keys in hard-to-reach areas of your bike. These L-Keys also feature Wera's Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally, the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. The L-Keys fit securely into the storage clip which is made of solid rubber, giving easy removal and no wear to the coloured plastic sleeves of the keys or size markings.
The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.
This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components.
Allows the use of 9, 10 and 11 speed Campagnolo cassettes on Elite indoor trainers.
With the increasing popularity of E-bikes, Race Face has answered the call by modifying its rock-solid Aeffect crank arm specifically for E-bike riders. This model benefits from increased clearance while still optimising its Q-factor, and a redesigned spline interface to maximise strength. This is the perfect choice of upgrade for a solid and reliable riding experience.
The front section of the front mudguard features a new dual-height spoiler that deflects water, mud and spray downwards towards the wheel and away from the rider. The rearguard is equipped with a telescopic extension section for adjustable coverage at the seat tube. Plus, these SKS Speedrocker Mudguards feature a unique rubber fastening system, which includes integrated recesses for frames with externally routed brake and gear cables. These modern innovations make these SKS mudguards compatible with virtually every frame design.
Cane Creek 40-Series HeadsetDesigned for challenging mountain bike (MTB) use, this 40-Series Headset from Cane Creek offers you a hard-wearing and long-lasting component that is ready for whatever the trail brings. The cup and cover are made from tough, lightweight aluminium and Cane Creek have also finished this version with a steel crown race for enhanced strength. Features:Part No: BAA0741KCup Material: 6061 T6 AluminiumCover Material: 6061 T6 AluminiumCrown Material: SteelUse: Mountain Bike (MTB)Steerer: TaperedStack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottomBearings:EC30 will take a 38mm bearingEC34 will take a 41mm bearingZS44 will take a 41mm bearingZS49 will take a 41mm bearingEC44/40 will take a 52mm bearingEC44/33 will take a 47mm bearingEC49 will take a 52mm bearingZS56 will take a 52mm bearingZS62 will take a 52mm bearingIS41 will take a 41mm bearingIS42 will take a 42mm bearingIS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series HeadsetDesigned for challenging mountain bike (MTB) use, this 40-Series Headset from Cane Creek offers you a hard-wearing and long-lasting component that is ready for whatever the trail brings. The cup and cover are made from tough, lightweight aluminium and Cane Creek have also finished this version with a steel crown race for enhanced strength. Features:Part No: BAA0741KCup Material: 6061 T6 AluminiumCover Material: 6061 T6 AluminiumCrown Material: SteelUse: Mountain Bike (MTB)Steerer: TaperedStack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottomBearings:EC30 will take a 38mm bearingEC34 will take a 41mm bearingZS44 will take a 41mm bearingZS49 will take a 41mm bearingEC44/40 will take a 52mm bearingEC44/33 will take a 47mm bearingEC49 will take a 52mm bearingZS56 will take a 52mm bearingZS62 will take a 52mm bearingIS41 will take a 41mm bearingIS42 will take a 42mm bearingIS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.