Foaming Chain Cleaner is a real innovation in bike maintenance. Utilising Fenwick’s cleaning superiority, chain cleaning has never been so easy. Fenwick's Foaming Chain Cleaner makes chain cleaning part of your bike wash routine, instead of a laborious 2nd job that never gets done. With its simple mess free application, there is very little waste as only 5 to 10ml of product is needed per clean and it is biodegradable too. Foaming Chain Cleaner does not use solvents or acids (citrus) to be effective, resulting in a safe product to use. To make the process even easier just use the Chain Cleaning Sponge to scrub the chain and the Gear Brush to agitate the cassette, jockey wheels and chainset. The cleaner is biodegradable and safe to use on anodising, carbon, plastics, rubber and painted surfaces. Directions for use: 1) Place the chain in middle gear for ease of use 2) Whilst turning the crank spray Foaming Chain Cleaner directly on to chain 3) Leave to soak for a couple of minutes – this can be done whilst you clean the rest of the bike with Fenwick’s BIKE CLEANER 4) For best results run the chain through the Fenwick’s CHAIN CLEANING SPONGE, specifically designed to agitate and, importantly, capture the chain dirt for a cleaner clean 5) Rinse thoroughly with clean water Top tip: As a water soluble degreaser Foaming Chain Cleaner can be used on delicate parts
The LifeLine Pro Cable Cutter is an essential tool for any mechanic, home or professional.
LifeLine offer a comprehesive range of bicycle tools with built-in quality and great value prices. Whatever mechanical job is looming, be it maintenance or a rebuild, LifeLine have the equipment you need.
LifeLine offers a comprehensive range of bicycle tools with built-in quality and great value prices. Whatever mechanical job is looming be it maintenance or a rebuild, LifeLine has the equipment you need. Please Note: *LifeLine Pro 16.41 BBR60 required for installation and removal of Shimano BBR60 (Ultegra 11 speed 6800 series) and Shimano MT-800 BBs (see here). *LifeLine Pro 16.39 XTR required for installation and removal of Shimano XTR BB93, Dura-Ace BB9000 and Token BBs (see here).
LifeLine offer a comprehesive range of bicycle tools with built-in quality and great value prices. Whatever mechanical job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
LifeLine Professional Bar Tape is supplied with everything you need for a fresh feel and increased grip on the flats and drops. The gel component helps absorb the shock transmitted from uneven road surfaces and distributes pressure more evenly across your hands. The set includes two 200cm rolls to accommodate longer bars and two custom LifeLine end plugs. Wrapping Tips LifeLine Professional Anti-Slip Bar Tape has a two tone finish. this looks best when the colours change just beneath the point where the brake/shift lever clamps on to the handle bar. It might be necessary to shorten the coloured portion of the tape to achieve this. We recommend wrapping the tape up to the clamp and measuring the length of remaining tape before the colour changes. Unwrap the tape and cut the measured length from the coloured portion before re-wrapping the tape using the figure of eight method.
Environmentally friendly, easy to rinse off and highly effective, this degreaser will help you components to look and perform like new again.
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold bottom headset cups are available in both internal and external types for both standard and tapered steerer tubes, enabling you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight. They include split alloy crown races for easy installation and the 1.5” versions can be easily adapted to work with alternative fork steerer types with the addition of the 1 1/8" to 1.5" crown race adaptor (reducer) if required (sold separately).
Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Click for compatibility chart.
Tested to their limit in all possible conditions by some of the world’s toughest and most demanding riders, Nukeproof disc pads will outperform the competition in wet weather or dry. No nonsense, High quality, High power braking with excellent modulation. Click for compatibility chart.
The Neutron grip's design ensures they offer optimised trail feedback without sacrificing on comfort. The locking mechanisms on either end ensure the grips are going nowhere. Plus, with these MTB grip's durable A25 Kraton rubber, they not only offer excellent grip, they're also super-durable too.