Keep your bike in pristine condition thanks to the 3-piece protection from the Bike Shield Combo Stay & Cable Shields Pack. Ideal for protecting your bikes finish from chain slap, scratches, grit and stones. Easy to apply and remove with no sticky residue left behind, this pack is ultra-tough and virtually invisible while on your bike. For long-lasting durability ride after ride, the Combo Stay & Cable Shields Pack will give you maximum protection from scratches when you need it most.
The ProGuard Hook and Loop Straps from RapidRacerProducts are Hook and Loop straps to quickly attach and remove Proguard V2 mudguard to your bike.
E-Bike Snow Foam has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Perfect for cleaning in a garage or shed without the need to rinse with water. Ideal for all E-Bikes, Road and MTB. Simply spray on Snow Foam and watch it instantly lift dirt from the surface. Wipe away without the need for water before buffing the surface clean. The perfect E-Bike cleaner. Our all-in-one instant action foam cleaner soaks into the dirt, lifting it away from the surface for an easy clean without the need for water. Once dry it leaves a polish which is buffed in to leave a high gloss finish. Perfect for cleaning indoors and without the need for water. Ideal for removing light dirt from frames and wheels. Safe to use on plastic and painted surfaces. Spray. Soak. Wipe. Buff. How to use your E-Bike Snow Foam Cleaner: Step 1: Spray onto frame, wheels or any painted, metal or plastic surfaces. Step 2: Leave for 5 – 30 seconds. The foam will go to work lifting the dirt and grime. Step 3: Wipe dirt away with a clean cloth. Step 4: Once dirt is removed, use a separate clean cloth (microfibre suggested) to buff the surface in circles to activate the polish, leaving a gleaming finish. Important: Do not use on braking components.
Directions: Get your bike wet Spray or brush Dirt Juice onto the bike and leave it to work its magic for no longer than 2 minutes, agitating the most stubborn areas with brush or sponge. If you prefer a bit more foaming action spray directly on to a brush and get to work with that. Rinse off with fresh water.
A Bike Cleaner for all Disciplines The Mobi Bike Cleaner Concentrate is designed for use on all surfaces, including all paintwork and clear coat finishes. So, whether you're clocking up winter miles on a road bike, tackling muddy cyclocross courses, or the worst trails, this Bike Cleaner Concentrate is ready to restore your bike to its former glory. Fast Acting Formula The fast acting formula will get to work straight away. Simply use one part concentrate to four parts water for the perfect strength bike cleaner. The formula penetrates dirt and grime to make light work of cleaning your bike.
Genuine, high-quality Mobi replacement.
Citrus Fresh The fast acting Citrus Degreaser Chain Cleaner formula gets to work right away. Rinsing off easily, you won't be left with stains or grime residue. Unlike other cleaning products that have a harsh chemical smell, you'll be left with a refreshing citrus scent on your glistening drivetrain. Use with a Chain Cleaner The Mobi Citrus Degreaser Chain Cleaner works seamlessly with your chain cleaning tool. Simply pour this citrus degreaser into your chain cleaner and start the hassle free cleaning process.
This superb model allows you to easily fit the carrier to your vehicles square or round aluminium load bars.
Off-road: Riding at lower pressure means better performance ... but at the same time, it increases the risk of failures. The limit so far is at about 20 psi, below which it’s hardly possible to dare to ride normal MTB tyres. But nothing stays the same: In the future, air pressure can be controlled in the tyre‘s double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off-road performance. In the inner chamber, directly on the rim, there is high air pressure – even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tyre onto the rim. “Burping”, the dreaded loss of air at low pressure in conventional tubeless systems, is impossible. The Name PROCORE is derived from "Progressive Core". The core (internal high-pressure chamber) progressively absorbs even the hardest impacts. Compatibility You can mount Procore with any tubeless compatible MTB tyre. The system is available for all three MTB wheel sizes (26", 27.5", 29"). Weight approx. 200g per wheel. Compatible with all wheels, independent of the brand. Minimum inner rim width: 23mm. PROCORE is a joint development of SCHWALBE and SYNTACE. PROCORE - the outer chamber The outer chamber is tubeless. Therefore, any tubeless compatible MTB tyres can be used. The tyre is filled with some liquid sealant (approx. 60ml) and should be at least 57mm (2.25") wide. PROCORE - the inner chamber Two special Procore components form the inner high-pressure chamber: the special Procore tube and the Procore inner tyre. This "core" is extremely high-pressure stable and at the same time very light. The Rim Of course, the rim must be tubeless compatible and sealed with a tubeless rim band. It should have an inner rim width of at least 23mm. The wider the rim, the easier the installation and the better the performance under low air pressure. The very wide Syntace rims are a perfect fit. The PROCORE Valve The patented dual valve of the Procore tube distributes the air into both chambers. The upper part of the valve is a selector. With a simple turn, you select whether air is pumped into the inner or the outer chamber. (Valve sold separately). The PROCORE Air Guide The small red component made of white plastic ensures that the air can flow past the inner high pressure chamber into the outer low pressure chamber. - Tyre pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. Even on the roughest terrain tyres “stick” to the ground. - Due to the extra cushioning and traction there is much better steering, braking and traction control. - No more risk of snake bites. The rims are extremely well protected from denting. - Even in the toughest conditions, significantly lighter tyres can be used. - Excellent emergency running characteristics due to the internal high-pressure air chamber.
Developed for a wide range of riding disciplines from mountain bike (MTB) to cross country (XC), these grips offer a fantastic balance of comfort, stability and control wherever your next adventure takes you. They feature a ProTaper logo grip pattern that's supportive for your palms as you conquer the more demanding of terrain conditions on your ride. Coming equipped with a single lock-on clamp, these are easy to secure in place and are designed to fit 22.3mm handlebar diameters. When clamped in place on your handlebar, they provide a strong and secure hold for slip-free steering performance. Sold as a pair. Manufacturer's Part Number: 361-37218-K001 Black
Specially formulated to keep satin matt paints, matt finishes and matt vinyl wraps looking as they were intended, this premium grade formula will rid your surfaces of prints, streaks and shiny marks, leaving a non-sticky protective finish as it goes. Built to repel dirt and grime once applied, the Matt Finish Detailer is a great spray to keep blemishes away.