The Sommet 297 CRX features a carbon/alloy frame adorned with 170mm-travel Kashima-coated Fox Float Factory suspension and a 12-Speed Shimano XT M8100 wide-range groupset. It rolls upon a mixed-wheel platform (29" front, 27.5" rear) that offers a sublime balance of rolling efficiency, stability and control for riding all-terrains. Vitus has also fitted it with 4-piston Shimano XT hydraulic disc brakes to control your momentum with dependable stopping power. And it rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II tyres. Full-Carbon Frame and Mixed-Wheel Platform Enduro Race Bike The big-hitting Vitus Sommet CRX 297 Mountain Bike is all about the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Fox Factory Suspension and Shimano XT 12-Speed Groupset The Sommet 297 CRX has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance over the back for steep ground and is responsive through tight corners, while a stable 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. Plus, it’s easier to pull manuals and wheelies. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Agile, Powerful and Versatile Long-Travel Suspension Bike The Sommet is a bike that you sit within, not perch on top. Eagerly shred the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through Enduro tape or dropping in on your favourite descent, speed comes easily to the Sommet CRX. It thrives in the chaos of turbulent trails. Bringing calm where all around there is frenzy. Key Features: Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Big-hitting enduro bike with modern geometry Fox 38 and Float X2 Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT 4 piston hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Fork: Fox 38 Float EVOL Factory Series 29", 170mm travel, Kashima coating, Grip2 damper, 38mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29" Front, 27.5" Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxTerra compound, DD casing Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT76 or Brakco DR-02, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.5kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
DT Swiss Rims and Maxxis Tyres Terrain-smoothing suspension and an efficient groupset aren’t the only standout features on this hard hitting full suspension ride. It also boasts 29"/27.5" DT Swiss E532/Formula boost wheels that are wrapped in the fast rolling and high grip Maxxis Assegai and DHR II tyres. This stylish full suspension enduro race bike is ideal for off-piste all-mountain exploring, alpine freeride routes and the rigours of long-distance enduro race events. Mullet Wheel Standard - 29" Front Wheel and 27.5" Rear Wheel Commencal has been working on 29/27 ‘Mullet’ bikes and frames for many years now with their different downhill (DH) teams. This work has allowed Commencal to understand that to transform a regular bike with the same sized wheels into a bike with different sized wheels, it isn’t effective to just throw a 27-inch wheel on the back. The geometry and kinematics of the bike must be completely reworked, and it is thanks to this experience that we are now able to present the most successful version of the META V4 they've ever produced, the Meta SX. Equipping this Meta SX with different sized 29/27-inch wheels is not the result of a trend that Commencal is following. Quite simply, this way the bike is much more balanced, specifically relating to grip on the front and back - the large 29-inch wheel on the front allows more confidence and rolling capacity whilst the 27.5-inch rear wheel offers more manoeuvrability and responsiveness. The result is a bike that is more agile and easier on the steeps, more efficient under braking and more dynamic when pushing hard. Once again, Commencal's choice to work with Aluminium has allowed them to accompany this change in wheel size with an adjustment of the geometry. A shorter 10mm reach, a straightened steerer angle and extended (10mm) chainstays mean that the rider is naturally repositioned in the centre of the bike and will therefore be more precise and agile in their technique. Lively, Progressive and Stable Enduro Optimised Suspension Undoubtedly, one of the points that have changed the most is the way the suspension works. Apart from the kinematics, which have been reworked to provide more liveliness, Commencal made a point of managing the stiffness of the rear triangle. Through new double row Enduro Bearings, eliminating any deformation, the Meta SX frame offers perfect deformation/rigidity management to provide grip, comfort, and performance. Easy Adjustable Flip Chip Suspension System In addition to all this in-depth work, as on their Meta Power TR and Meta TR models, Commencal now offers a "Flip Chip" on the shock extension in order to be able to better adjust the geometry, and therefore fit with your style. This system also means you can adapt the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on your preferences, you can have the choice between a dynamic bike that’s perfect for big pedalling trips, or a more progressive version that is ideal for days in the bike park or on more committed trails. Stylish Welds and Convenient Cable Routing The welds have been the subject of meticulous work to reduce them as much as possible without affecting the solidity of the frame. The cable routing is neat for easier maintenance, the cables being easily accessible in the down tube, while grommets are placed at the ends to give perfect support and prevent penetration of water and mud. Installing a bottle cage has also been made easy. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Commencal Meta SX Essential Suspension BikeAttacking descents, weaving through trees and landing huge jumps, modern enduro riding demands a ride that can handle anything and that’s exactly what the Meta SX Essential mountain bike (MTB) offers you. Its triple butted alloy frame is backed up by Fox Performance suspension, a Shimano SLX 1x12 speed drivetrain and SLX 4-Piston hydraulic disc brakes.DT Swiss Rims with Maxxis Assegai and DHR TyresCommencal has also fitted it with 27.5"/29" DT Swiss E532 rims, which are wrapped in Maxxis Assegai and DHR II tyres. This stylish full suspension enduro race bike is ideal for off-piste all-mountain exploring, alpine freeride routes and the rigours of long-distance enduro race events.Mullet Wheel Standard - 29" Front Wheel and 27.5" Rear WheelCommencal has been working on 29/27 ‘Mullet’ bikes and frames for many years now with their different downhill (DH) teams. This work has allowed Commencal to understand that to transform a regular bike with the same sized wheels into a bike with different sized wheels, it isn’t effective to just throw a 27-inch wheel on the back. The geometry and kinematics of the bike must be completely reworked, and it is thanks to this experience that we are now able to present the most successful version of the META V4 they've ever produced, the Meta SX.Equipping this Meta SX with different sized 29/27-inch wheels is not the result of a trend that Commencal is following. Quite simply, this way the bike is much more balanced, specifically relating to grip on the front and back - the large 29-inch wheel on the front allows more confidence and rolling capacity whilst the 27.5-inch rear wheel offers more manoeuvrability and responsiveness.The result is a bike that is more agile and easier on the steeps, more efficient under braking and more dynamic when pushing hard.Once again, Commencal's choice to work with Aluminium has allowed them to accompany this change in wheel size with an adjustment of the geometry. A shorter 10mm reach, a straightened steerer angle and extended (10mm) chainstays mean that the rider is naturally repositioned in the centre of the bike and will therefore be more precise and agile in their technique.Lively, Progressive and Stable Enduro Optimised SuspensionUndoubtedly, one of the points that have changed the most is the way the suspension works. Apart from the kinematics, which have been reworked to provide more liveliness, Commencal made a point of managing the stiffness of the rear triangle. Through new double row Enduro Bearings, eliminating any deformation, the Meta SX frame offers perfect deformation/rigidity management to provide grip, comfort, and performance.Easy Adjustable Flip Chip Suspension SystemIn addition to all this in-depth work, as on their Meta Power TR and Meta TR models, Commencal now offers a "Flip Chip" on the shock extension in order to be able to better adjust the geometry, and therefore fit with your style. This system also means you can adapt the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on your preferences, you can have the choice between a dynamic bike that’s perfect for big pedalling trips, or a more progressive version that is ideal for days in the bike park or on more committed trails.Stylish Welds and Convenient Cable RoutingThe welds have been the subject of meticulous work to reduce them as much as possible without affecting the solidity of the frame. The cable routing is neat for easier maintenance, the cables being easily accessible in the down tube, while grommets are placed at the ends to give perfect support and prevent penetration of water and mud. Installing a bottle cage has also been made easy.Features: Frame: Meta SX, 160mm rear travel, 29''-27.5'', Alloy 6066, triple butted tubes, T4, T6. Enduro bearings Fork: Fox Suspension 38 Performance, 170mm Travel, 29", Fit Grip damper, 3 positions, rebound, Boost (15x110mm), 44mm offset, 2 Tokens Rear Shock: Fox Suspension Float X Performance, 230x62.5mm, 2-position lever, rebound adjust Headset: ACROS ZS44/ZS56, Alloy cups, sealed bearings Stem: Ride Alpha Freeride 40, 40mm extension, 31.8 mm Handlebar: Ride Alpha R20 760 on Small; Ride Alpha R27 780mm on Medium and Large; Ride Alpha R27 800 on X-Large. 31.8 mm, 760 mm width, 20 mm rise, Alloy 6061 on S - 31.8 mm, 780 mm width, 27 mm rise, Alloy 6061 on M / L - 31.8 mm, 800 mm width, 27 mm rise, Alloy 6061 on XL Grips: ODI Elite Motion, Soft pro compound, single clamp, black Brakes: Shifters: Rear Derailleur: Shimano SLX 1x12-Speed Bottom Bracket: Shimano BB71-41A, Pressfit Crankset: Shimano SLX Boost, 170mm crank arms, Chainring: Shimano SLX, 32T, Dynamic Chain Engagement + Technology Chain: Shimano SLX, 12-Speed Cassette: Shimano SLX, 12-Speed, 10-51T Rims: DT Swiss E532 29"/27.5" Hubs: Front: Formula DC-711 32h, sealed bearings; Rear: Formula DCL-148A, 32h, sealed bearings Spokes/Nipples: SAPIM Leader, J-Bend 2.0 mm, stainless, with Nylok, black Tyres: Front: Maxxis Assegai 29" x 2.5", WT, 3C MaxxTerra, EXO, Tubeless Ready; Rear: Maxxis DHR II 27.5" x 2.4", WT, 3C MaxxTerra, EXO+, Tubeless Ready Seatpost: KS Rage-I 34.9 mm, travel: 125 mm on S, 150 mm on M, 170 mm on L, 190 mm on XL, SouthPaw alloy remote Saddle: Fizik Terra Alpaca X5, 145mm width, S-alloy rails Accessories: Downtube protector, chainstay protector, seatstay protectorEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Commencal Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 36 Float, Performance Elite Series, Grip 2 Damper, 160mm, 44mm Offset, BOOST, Black • Shock: Fox Float X, Performance Elite Series, 2 Position, LV EVOL, Custom CM+, RM, Rezi LM, 210x55mm, Bearing End, 1x 0.3 spacer fitted. • Front Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, 110x15mm • Rear Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Assegai 27.5x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5x2.4" WT 3C MaxxTerra/EXO+/TR • Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline • Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus • Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink • Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads • Front Rotor: Brakco, 203mm • Rear Rotor: Brakco, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm Axle to Crown: 549mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Chunky rock gardens, gnarly roots and steep, technical climbs. The all-new Trance X 29 is for those who consider the hardest section of trail their favourite part of the ride. With longer suspension travel and adjustable geometry, this aluminium trail slayer delivers hard-charging singletrack fun.Engineered to help you ride faster and smoother on the toughest trails, this all-new 29er has a lightweight, strong and stiff aluminum chassis with 29er-specific geometry and a plush ride thanks to its advanced new suspension setup. Longer travel Maestro suspension delivers 135mm of active rear travel that pairs perfectly with a 150mm fork. The Advanced Forged Composite rocker arm has a flip-chip that allows you to adjust frame geometry and tailor the bike’s handling to your riding style and terrain. Choose steeper or slacker headtube/seattube angles and either a 30mm or 40mm bottom bracket drop to adjust the handling for your riding style and terrain. It’s all built around 29-inch wheels and lots of clearance (up to 2.5-inch tyres) for maximum control on rugged trails.29er confidence and control29-inch wheels roll over rough terrain with balance and stability, giving you more momentum for technical climbs and the confidence to fly on fast, rugged singletrack descents. Added clearance for up to 2.5-inch tyres.Progressive suspensionNew Maestro rear suspension features a trunnion mount shock with a longer stroke and smoother feel. With 135mm of full rear-wheel travel (and 150mm up front), it features a two-position adjustable Advanced Forged Composite flip-chip equipped upper rocker arm for increased stiffness and strength plus lower overall frame weight.Adjustable frame geometryLightweight ALUXX-SL frameset features adjustable geometry that offers 66.2 or 65.5-degree headtube and 77.9 or 77.2-degree seattube angles, resulting in 30mm or 40mm bottom bracket drop options for aggressive trail configurations.
Chunky rock gardens, roots and technical climbs. This hard-charging trail bike adapts to the terrain, giving you confidence and control on all types of singletrack.KEY PERFORMANCE FACTORS29er confidence and control29-inch wheels optimized to roll over technical terrain with balance and stability, giving you more momentum on tricky climbs and confidence to fly on fast singletrack descents. Added clearance for up to 2.5-inch tires.Progressive suspensionMaestro rear suspension features a trunnion mount shock with a longer stroke and smoother feel. With 135mm of full rear-wheel travel (and 150mm up front), it features an Advanced Forged Composite upper rocker arm for increased stiffness and strength plus lower overall frame weight.Adjustable geometryA flip chip lets you change the headtube and seattube angles, along with the bottom bracket height, to fine-tune the handling. You can choose the low position (65.5/77.2 head/seattube angle and 40mm BB drop) for fast, open terrain, or high (66.2/77.9 head/seattube angle and 30mm drop) for slower, tighter singletrack.
ARE YOU THIS RIDER?Do your friends ask if you intend to ride the chairlift when you invite them out for a ‘few’ park laps? Do your top routes frequently involve pushing up and down trails that aren’t on any map? Do your favorite rides begin or end with headlamps, an ice chest and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike.LINKAGE UPDATEOccam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity and a lower chance of something working loose.ASYMMETRICAL DESIGNInstead of using a less-efficient "shock tunnel," the Occam offsets the shock to the left side of the frame.YOUR SUSPENSION, YOUR WAYThe best modern trail bikes are used for an impressive variety of terrain and need to be adaptable. OCCAM is designed to work well with 140mm or 150mm front and rear travel and the progressive rear suspension works well with either an air or a coil shock.
Let's get something clear, the Stumpjumper EVO Alloy isn't a "normal" trail bike. It's built to get gnarly, plain and simple. Featuring the same all-new design as its carbon brethren—including an adjustable head tube angle, 150mm of performance tuned travel, the adaptability of S-Sizing, and SWAT™ Door integration—in a lightweight yet tough M5 Alloy chassis, you're going to be able to bomb down trails that you thought you couldn't touch without a full-blown DH rig.• All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.• The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.• Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.• We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.
The Ransom. This Enduro Mountain Bike features 170mm of trail munchin', climb crushing, stage winning all day pinning mountain biking excellence. The 930 comes equipped with a RockShox Domain fork, our TwinLoc Suspension System, a Shimano 12 speed groupset and Syncros components to help you get away with murder, regardless of your ability level.
The Five Evo is exceptional. It out-performs longer travel bikes in a manner you wouldn't believe. Right at the start, we said these bikes are about geometry, and the Five Evo demonstrates how the new Evo geometry works to perfection. This is the 140/130 27.5 wheeled version. Bang on the money for rocky, twisty singletrack trails where surefooted manoeuvrability is your main priority. Its reactive response and composure are inspiring.FRAME EVOLUTIONInstantly, you can see the frames are Orange, with our distinctive layout and profiles. They are fabricated in 6061-T6 Aluminium by the craftsmen at our Halifax Frame Works. Brand new tooling and jigs were specifically built and developed for these new models, leaving no stone unturned when it comes to new frames' feature list. The laterally stiff single-pivot platform is a format we feel we own. We have more experience with this suspension system than any other bike company out there. For us, working with component manufacturers to achieve the perfect shock tunes for our frames is one of the most exciting aspects of the job. It’s a two-way street as the Orange single-pivot system is a perfectly clean platform for manufacturers to develop their shocks with too, So it’s a win-win situation for everyone. The Evo frames have all the features you would expect from Orange and a few touches you probably may not notice at first glance. To mention a few:The Evo’s offset asymmetric pivot gives us scope to run various sizes of chainring or chain-lines (hey, you never know). The geometry is designed for a reduced offset fork which allows us to lengthen the cockpit and keep the riders weight balanced in the sweet spot, while making the most of the front wheel’s grip in turns.Small details like bottle bosses, cleaner cable routing and space for piggy-back shocks - even on a short travel-platform, show we’ve been listening to our test riders’ feedback and implementing subtle changes that just make everything better.THE EVO GEOMETRY CONCEPTThe thinking behind the Evo geometry on these two models is to bring the feel and confidence of the big-travel enduro bike into the realm of the aggressive short-travel trail bike. With a lighter frame construction and audacious angles these bikes are truly eye-opening.The geometry has a familiar effective top tube length which means your cockpit is a comfortable space when climbing. Flip that gradient downwards, slam the dropper post and step-up out of the saddle to descend and the Evo comes into its own. The long reach gives the rider plenty of space to move around the bike, keeping the weight over the front wheel - this is also helped by the reduced offset fork. The slacker Evo head angle lets the fork do its job, right it in the firing line, and keeps everything stable with its long wheel base. Ultimately you will not believe this is a short-travel platform. Rapid, reactive and beautify balanced, the Evos defy logic. They are the Evolution of the trail bike as we know it.The FactsWHY THE FIVE EVO?F: 140MM | R: 130MM | W: 27.5Brand New Frame designed and built in Britain,5 year frame warranty with Limited Lifetime Crash Replacement,Single pivot suspension for the utmost performance, efficiency and reliability,New Radically revised progressive suspension frame curve,New Aggressive Evo geometry optimised for 140mm front/130mm rear travel,Bottle cage mounts,27.5 inch wheels,Boost 148 rear hub spacing,Internal dropper post routing?.
The Escarpe 29 CRX features an elegant full-carbon frame that's adorned with Fox Float Factory Kashima-coated suspension front and rear, giving you a buttery-smooth ride with exceptional agility, control and traction. It's armed with a smooth-shifting Shimano XT M8100 12-Speed groupset that includes a Shimano XT chainset, a 10-51 Tooth wide-range cassette and powerful XT hydraulic disc brakes. It also rolls upon a Tubeless Ready Nukeproof Horizon V2 wheelset wrapped in Tubeless Ready 3C MaxxTerra compound Maxxis tyres. This full-suspension race bike offers outstanding composure and prowess in all-weather and all-terrain conditions, making it the ideal journey companion or race-day partner for riding anywhere on Earth. Strong and Lightweight Full-Suspension Trail Bike Dappled forest light on warm dusty trails. The soundtrack of tyres rushing through berms, nimbly threading a rock garden and the buzz of a happy freewheel. Eyes trained on the way ahead. You’re focused, but it’s easy. On the full-carbon Vitus Escarpe 29 CRX, there are no distractions. All trust and total control. But life isn’t a photoshoot, so let’s get real here. Swap in off-camber, hectic off-piste and washed-out turns, slick roots and “that climb” back to the trailhead. It doesn’t matter. The Escarpe is poised and planted - perfectly balanced to flow with you no matter where the trail goes. You and the bike are singing from the same hymn sheet. You want a bike that inspires confidence on technical descents and keeps you grinning for more, not gritting your teeth. You want a bike that holds speed and drives keenly into the climbs, keeping your legs fresh for one more run. You want to keep the weight down and the performance high. This is it. Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. Flip-Chip Adjustable Suspension Platform The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Vitus has ensured that geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. When riding trails there’s enough to think about without having to consider how the bike is going to respond to the next turn or obstacle. You should just know. It should do what you need it to. No backchat and no fight. On the Escarpe you don’t have to compensate or compromise. You don’t have to adjust your style. Just ride. Just concentrate on having fun. Key Features: Full T800 frame sheds weight for a truly responsive ride Fox 36 and Float DPS Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Dissector tyres Suspension Travel: 150mm Front, 140mm Rear Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, Grip2 air spring, EVOL, 3 position lever, 205mm x 60mm, trunnion Fork: Fox 36 Float Factory Series 29"", 150mm travel, Kashima coating, GRIP2 damper, 36mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8"" upper tapered to 1.5"" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 760mm Wide, L and XL: 780mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grip(Tape): Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29", 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready Front Rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Rear Rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Front Hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm Rear Hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm Front Tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxTerra compound, EXO casing Rear Tyre: Maxxis Dissector, 29" x 2.4" WT, 3C MaxxTerra compound, EXO+ casing Spoke: Stainless Steel, Double Butted Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 30T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT M8120, Lever: BL-M8100, Caliper: BR-M8120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT M8100, Lever: BL-M8100, Caliper: BR-M8100, Post Mount, Two Piston Caliper Rotors: Shimano RT76, 203mm Front, 180mm Rear, 6 Bolt Hub Fitment Rear Derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage Right Shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Neutron Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 14kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Any Trail, Any time. With the Genius 940, this phrase has never rung truer. With our TwinLoc Suspension System to always optimize your ride, a Shimano 12-speed drivetrain and Syncros components, the Genius 940 is a mountain bike that will get you up and down the mountain without breaking the bank.