Park Tool Synthetic Blend Chain Lube w/PTFE CL-1A new chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions.Features: Penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion Also work great on cables, spoke nipples, and derailleur and brake pivots 4oz. (118 ml) bottleBuy Park Tool Chain Lube from Chain Reaction Cycles, the World's Largest Online Bike Store.
Penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion Also work great on cables, spoke nipples, and derailleur and brake pivots
This shop quality screw-type chain tool is ready for years of professional use and new 1.1 bridge geometry fits modern chains including SRAM® 12 Speed Road. Key Features: Updated bridge geometry fits modern chains including SRAM® 12 Speed Road.,Ergonomic handles for efficiency, comfort, and safety.,Integrated guide pin sheer slot.,Replacement pin stored in handle..
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 0.5% and 0.75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings.
A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfacesThe Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal. Allows full forward and backward rotation of the drivetrain
The Chain Pig II is an updated version of the Chain Pig with improved closure mechanism made in flexible steel arms holding the bottom and top pieces together.The Chain Pig was designed with professional quality, easy use, performance and versatility in mind. Each element has been designed to outperform and outlast the competition. The upper and lower body are made from super-strong, chemical and impact-resistant plastic, designed to last for years of use. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. For bikes with rear derailleurs the drag-free derailleur hook provides simple use and hands-free operation. The Chain Pig has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and ontothe chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning.
The right multi-tool can be the difference between finishing the most epic ride of your life and going for the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to make sure you finish that epic ride.Pedro's Six-Pack Chain Tool is a super compact, professional quality, minimalist multi-tool great on its own or as a supplement to other multi-tools lacking a chain tool or spoke wrenches. The Six-Pack Chain tool is made from heat-treated tool steel for strength and long-lasting performance. The small ergonomic design fits almost anywhere but performs like a full size chain tool.The Six-Pack Chain Tool Multi-Tool weighs 80g and has 6 functions including 5mm hex key, a flat blade screwdriver, and shop quality chain tool with integrated 3.2, 3.3, and 3.5mm spoke wrenches.
The chain tool is fundamental to bicycle mechanics. As drivetrains push the envelope, however, chain tools must evolve to keep pace. The Pedro's Tutto Multi-Chain tool has done just that. The Tutto blends ergonomic, organic design and noticeable industrial stature with patented innovations like the Fit Dial and RPG and novel additions like the 11-Speed Peening Bit, ergonomic set-back handle design, and Guide Pin Sheer Slot you won't find on any other tool. These unique features make the Tutto the most versatile chain tool available, compatible with almost any chain from single speed to Campagnolo® 11 Speed. Lastly, the Tutto was designed with season after season of professional service in mind featuring heat-treated tool steel construction for the ultimate in strength and long-lasting performance, and simple disassembly to make servicing and part replacement a breeze, if its ever needed. Simply put, the Tutto may be the last chain tool you ever need. Backed by Pedro's lifetime warranty.Key Features:Fit Dial - The Fit Dial is used to adapt your Tutto Multi-Chain Tool to almost any modern chain. The Fit Dial wheel has 4 anvil features. Inspecting closely you will find that each anvil feature differs from the other in height or style. Each anvil is marked with a series of dots denoting which setting is in use. A Fit Dial usage guide is laser etched on the Tutto handle for easy reference. Each indexed setting is easily selected by rotating the Fit Dial..RPG - The RPG, or Retracting Pin Guide, is a multi-purpose feature found only on the Tutto Multi-Chain Tool. First, the spring loaded RPG supports the pin up to the face of the chain eliminating broken pins and ensuring perfect alignment every time. Second, for chains with guide pins like Shimano® or Campagnolo®, the RPG encloses the guide pin to prevent loss, bending or breakage, and ensuring perfect installation. Third, the RPG acceppts the 11-Speed Peening Bit required for installation of Campagnolo® 11-speed chains..11-Speed Peening Bit - The 11-Speed Peening Bit is handily stored in the base of the Tutto handle. This bit is used for Campagnolo® 11- speed chain installation which requires a peening operation during installation of the chain rivet. The bit is easily removed from the handle and fits onto the end of the RPG allowing installation of Campagnolo® 11- speed chains..Guide Pin Sheer Slot - For chains that use a guide pin for installation, the Guide Pin Sheer Slot provides an integrated tool to remove the guide section from installation pins. After pressing the master pin into the chain, simply insert the guide section into the sheer slot and rotate the tool up or down..
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.• Installs on 4-arm 104BCD MTB Crank.• RD- Must use ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2.• In very rough terrain, or just for pure security, we still recommend use of an upper guide.Specification:• 104 BCD | 30t - 36t | 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Stamped and machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide
Key Features:For use with Direct Mount cranks with the 3-Bolt SRAM style interface.Specification:38T, 40T, 42T | 3-Bolt Direct Mount | 7075-T6,Wave™ Tech tooth profile,10/11/12sp Shimano/KMC/SRAM,Stamped and machined manufacturing with hard black anodizing for durability,REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2,In rough terrain, or just for security, we still recommend use of an upper guide,In very rough terrain, or just for pure security, we still recommend use of an upper guide.
Designed specifically for e-Bikes and longer wear, our steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish.Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.• STEEL eRING FOR eBIKES 104 BCD | 32 – 36T• These e-rings are ‘female‘ threaded. Male M8 CR bolt threads into ring for motor clearance.• Wave™ Tech tooth profile | 10/11/12sp Shimano/KMC/SRAM• Cold forged 4130 grade steel | Black Oxide coating• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide
Our Praxis TT Road Chainrings are the result of relentless testing and tweaking, matched with the best material and manufacturing processes to create some of the smoothest running, most durable and sweetest shifting Chainrings available. These TT Rings are machined from 7075 T6 Aluminium and hard anodized for even more durability. They also feature our famous LevaTime Shifting Technology, which boasts synchronized ramps and strategically placed shift pins for perfectly timed shifts every time.PLEASE NOTE: Chainring Bolts are NOT included.SHIMANO - Our Praxis time trial chainrings work great with the new Shimano 10/11sp chain and drivetrains (Di2 included) when mounted to a traditional 5-arm mount 110 or 130 BCD Shimano crank. They also work great with traditional 5-arm mount aftermarket cranks such as THM, Rotor, Cannondale, Specialized, LOOK and FSA cranks… *Our chainrings do not mount to the new DA9000 crank with its new custom asymmetrical BCD.SRAM - Our chainrings work great with the SRAM 10sp and 11sp drivetrains when mounted to a traditional 5-arm mount 110 or 130 BCD SRAM crank. They also work great with traditional 5-arm mount aftermarket cranks such as THM, Rotor, Cannondale, Specialized, LOOK and FSA cranks.EXOGRAM RED/FORCE/RIVAL CRANKS - Our rings are not made for the brand new SRAM ‘Exogram’ cranks as they are a custom 4-arm mounting. -YAW FRONT DERAILLEUR - Our rings shift great with the new SRAM “Yaw” front derailleur.CAMPY - Our rings work great with Campy 10/11sp chain and drivetrains (EPS included) when mounted on a traditional 5-arm mount 110 or 130 BCD crank such as a THM, Rotor, Cannondale, Specialized, LOOK, FSA crank. Our rings DO NOT mount to Campy cranks.LEVATIME – Our LevaTime shifting is the product of years of relentless testing and tweaking. The final result is a set of some of the finest and fastest-shifting rings available. With a LevaTime ring, several custom shift pins are placed strategically at points on the ring to provide a perfectly timed lift. Synchronized ramps are tuned with a specific inner ring, providing a clean channel for the chain to move upwards. Each individual tooth is sculpted to handle a specific duty. Along with that, the Praixs time trail chainring's precisely located scallops help control chain movement and prevent chain suck.Specification:• LIMITED EDITION MACHINED PRODUCTION• 54/42 130BCD.• Heat Treated and Hard Anodized 7075 T6 Aluminium.• Work with Shimano™ 10/11, Campy 10/11, SRAM 10/11 drivetrains.• Designed for traditional 5-arm 130BCD cranks.• We highly suggest KMC, Shimano™, or Campy chains.• Not compatible with 4-arm Campy or 4-arm SRAM Exogram cranks.• GREAT for use with Di2 or EPS systems.• Power2Max, SRM, and Quarq power meter compatible.