Cleans bicycle chain quickly easily and effectively without the hassle and mess of removing the chain from the bike. The Cyclone™ uses a large solvent reservoir hundreds of rotating bristles and a two-step cleaning process to get chains really clean improve shifting performance and extend the life of the chain and other expensive drivetrain parts. Works with all multi-speed bikes (5 6 7 8 9 10 11 and 12-speed) as well as some single-speed models and e-bikes The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain Special wicking sponge draws solvent from the chain as it exits minimizing drips and mess Sturdy handle makes the Cyclone™ easy to use and control Holds 2 fluid ounces (59ml) of solvent
The new CM-5.3 Cyclone Chain Scrubber from Park Tool cleans your bicycle chain quickly, easily and effectively without the hassle and mess of removing the chain from the bike.Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikesStrong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chainSpecial wicking sponge draws solvent from the chain as it exits, minimizing drips and messSturdy handle makes the Cyclone easy to use and controlHolds 2 fluid ounces (59ml) of solventThe Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. It works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes.Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain and a special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess. The sturdy handle makes the Cyclone easy to use and control.
The Park Tool CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts.
The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
The Park Tool CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. The unique "floating tip" ensures smooth operation and long life. As with most Park Tool products, it also features a hole specifically designed for hanging on a tool wall.
This crank wrench will be of benefit to any profession or amatuer mechanics toolbox.
The Park Tool CCP-44 is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a self-extracting system.
The universal design of the Park Tool crank puller has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® electric bikes (E-Bikes). The CWP-7 is made for the 22 x 1mm threading in common cranks.
A professional quality shop chain tool that works on single speed as well as 5-12-speed Road and Mountain Bike derailleur chains, including SRAM® AXS 12 speed. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin. The CT-3.3 will install, but not peen, Campagnolo® 11 and 12-speed chain rivets. Made in the USA and covered by Park Tool's legendary limited lifetime warranty
The Park Tool CT-3.3 Professional Chain Tool is a professional quality shop chain tool that works with 1/8", 3/16" single speed chains and 5 to 12-speed / 3/32" road and mountain bike derailleur chains* including SRAM AXS 12-speed, Shimano 12-speed chains and Campagnolo 13-speed chains.A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains, including SRAM AXS 12 speed, as well as 1/8 and 3/16 chainsThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivetsBuilt to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pinThe CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivetsMade in the USA and covered by Park Tool's legendary limited lifetime warrantyThe CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). Works with single speed half-links.*The CT-3.3 will install, but not peen, Campagnolo 11, 12 and 13-speed chain rivets (see CT-4.3 or CT-6.3)
Park Tool CT-5 Mini Chain Brute Chain Tool This chain splitting tool is of workshop quality yet manages to be contained in it's very compact form,meaning this is a great tool you can keep either in the garage or in your saddle bag. Park Tool are a well established company that have been producing quality tools for a long time, so you can put your trust in the brand. - T.H Key Features: A chain tool that is small enough to go anywhere, yet which performs like a full size workshop tool Fine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivets. Includes a loosening shelf to release stiff links after assembly. Replaceable driving pin head Works on most bicycle chains, including 10-speed. Weighs just 77 grams.
Small and compact chain tool performs like a shop quality tool by using a fine threaded shaft and super strong replaceable pin. Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick. Perfect take-along chain tool at only 77 grams. Handy "loosening shelf" to remedy stiff links after reassembly. Compatible with Sram Eagle hollow pin chains. 1/8", 5-12 speed chain tool