The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
Small and compact chain tool performs like a shop quality tool by using a fine threaded shaft and super strong replaceable pin. Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick. Perfect take-along chain tool at only 77 grams. Handy "loosening shelf" to remedy stiff links after reassembly. Compatible with Sram Eagle hollow pin chains. 1/8", 5-12 speed chain tool
A professional quality shop chain tool that works on single speed as well as 5-12-speed Road and Mountain Bike derailleur chains, including SRAM® AXS 12 speed. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin. The CT-3.3 will install, but not peen, Campagnolo® 11 and 12-speed chain rivets. Made in the USA and covered by Park Tool's legendary limited lifetime warranty
A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfacesThe Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal. Allows full forward and backward rotation of the drivetrain
The right multi-tool can be the difference between finishing the most epic ride of your life and going for the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to make sure you finish that epic ride.Pedro's Six-Pack Chain Tool is a super compact, professional quality, minimalist multi-tool great on its own or as a supplement to other multi-tools lacking a chain tool or spoke wrenches. The Six-Pack Chain tool is made from heat-treated tool steel for strength and long-lasting performance. The small ergonomic design fits almost anywhere but performs like a full size chain tool.The Six-Pack Chain Tool Multi-Tool weighs 80g and has 6 functions including 5mm hex key, a flat blade screwdriver, and shop quality chain tool with integrated 3.2, 3.3, and 3.5mm spoke wrenches.
The chain tool is fundamental to bicycle mechanics. As drivetrains push the envelope, however, chain tools must evolve to keep pace. The Pedro's Tutto Multi-Chain tool has done just that. The Tutto blends ergonomic, organic design and noticeable industrial stature with patented innovations like the Fit Dial and RPG and novel additions like the 11-Speed Peening Bit, ergonomic set-back handle design, and Guide Pin Sheer Slot you won't find on any other tool. These unique features make the Tutto the most versatile chain tool available, compatible with almost any chain from single speed to Campagnolo® 11 Speed. Lastly, the Tutto was designed with season after season of professional service in mind featuring heat-treated tool steel construction for the ultimate in strength and long-lasting performance, and simple disassembly to make servicing and part replacement a breeze, if its ever needed. Simply put, the Tutto may be the last chain tool you ever need. Backed by Pedro's lifetime warranty.Key Features:Fit Dial - The Fit Dial is used to adapt your Tutto Multi-Chain Tool to almost any modern chain. The Fit Dial wheel has 4 anvil features. Inspecting closely you will find that each anvil feature differs from the other in height or style. Each anvil is marked with a series of dots denoting which setting is in use. A Fit Dial usage guide is laser etched on the Tutto handle for easy reference. Each indexed setting is easily selected by rotating the Fit Dial..RPG - The RPG, or Retracting Pin Guide, is a multi-purpose feature found only on the Tutto Multi-Chain Tool. First, the spring loaded RPG supports the pin up to the face of the chain eliminating broken pins and ensuring perfect alignment every time. Second, for chains with guide pins like Shimano® or Campagnolo®, the RPG encloses the guide pin to prevent loss, bending or breakage, and ensuring perfect installation. Third, the RPG acceppts the 11-Speed Peening Bit required for installation of Campagnolo® 11-speed chains..11-Speed Peening Bit - The 11-Speed Peening Bit is handily stored in the base of the Tutto handle. This bit is used for Campagnolo® 11- speed chain installation which requires a peening operation during installation of the chain rivet. The bit is easily removed from the handle and fits onto the end of the RPG allowing installation of Campagnolo® 11- speed chains..Guide Pin Sheer Slot - For chains that use a guide pin for installation, the Guide Pin Sheer Slot provides an integrated tool to remove the guide section from installation pins. After pressing the master pin into the chain, simply insert the guide section into the sheer slot and rotate the tool up or down..
The Chain Pig II is an updated version of the Chain Pig with improved closure mechanism made in flexible steel arms holding the bottom and top pieces together.The Chain Pig was designed with professional quality, easy use, performance and versatility in mind. Each element has been designed to outperform and outlast the competition. The upper and lower body are made from super-strong, chemical and impact-resistant plastic, designed to last for years of use. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. For bikes with rear derailleurs the drag-free derailleur hook provides simple use and hands-free operation. The Chain Pig has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and ontothe chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning.
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 0.5% and 0.75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings.
This shop quality screw-type chain tool is ready for years of professional use and new 1.1 bridge geometry fits modern chains including SRAM® 12 Speed Road. Key Features: Updated bridge geometry fits modern chains including SRAM® 12 Speed Road.,Ergonomic handles for efficiency, comfort, and safety.,Integrated guide pin sheer slot.,Replacement pin stored in handle..
ISCG05 CHAINGUIDE – This guide is made specifically for MTB bikes with ISCG05 mount. With simple adjustment with a 4mm Allen wrench, you set the vertical and lateral location of the guide head. The guide head can also be adjust to swing up and out of the way for easy access and maintenance of your Chain/Crank/Ring.Elegant no shim/washer design allows for simple setup with only a 4mm allen wrenchThis guide is made specifically for bikes with ISCH05 mounts. With simple adjustment with a 4mm Allen wrench, you set the vertical and lateral location of the guide head. The guide head can also be adjusted to swing up and out of the way for easy access and maintenance of your chain/crank/ring.• Chainguide for ISCG’05 MTB bicycles• Short 26T-32T Tall 26T-38T• Alloy boom, and inject mold guide head• 4mm Allen wrench to adjust vertical, lateral, and guide head• One extra guide head included
Designed specifically for e-Bikes and longer wear, our steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish.Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.• STEEL eRING FOR eBIKES 104 BCD | 32 – 36T• These e-rings are ‘female‘ threaded. Male M8 CR bolt threads into ring for motor clearance.• Wave™ Tech tooth profile | 10/11/12sp Shimano/KMC/SRAM• Cold forged 4130 grade steel | Black Oxide coating• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.• Installs on 4-arm 104BCD MTB Crank.• RD- Must use ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2.• In very rough terrain, or just for pure security, we still recommend use of an upper guide.Specification:• 104 BCD | 30t - 36t | 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Stamped and machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide