The GP Chain Lock from Oxford is a quality, strong general use chain witch would prove more than a match for most. The GP Chain Lock has a convenient cloth chain cover to protect your paint work when locking up your bike.
The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
Designed to get the maximum usage out of your chain, this fluid will remove all sorts of dirt and grease build-up from whatever terrain you have been riding. Ideal for use with the CM-5.2 Cyclone Chain Scrubber, and CM-25 Professional Chain Scrubber, or just as a general purpose degreaser, this formula is 100% biodegradable and plant-based, making it a smart and environmentally-friendly choice for getting your chain gleaming again. Safe to use on alloys, plastics and rubber parts and containing a rust inhibitor for added longevity, this Park Tool CB4 fluid will give your chain the best possible clean ahead of lubrication. Note: Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
Park Tool Bio ChainBrite Cleaning Fluid CB-4Clean dirt and grime off your bike chain with the ChainBrite Cleaning Fluid from Park Tool. 100% biodegradable, this cleaning fluid is environmentally friendly and offers tough cleaning properties to help lubricate and clean your chain no matter what terrain you've met on the trail. Features:Volume: 450ml/16ozContains rust inhibitor100% BiodegradableCompatibility: CM-5.2 Cyclone Chain Scrubber, CM-25 Professional Chain ScrubberBuy Park Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
The Park Tool CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
The Park Tool CC2 Chain Checker helps alleviate poor shifting and uneven drive train wear. Most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker s pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too.
The Park Tool CC3.2 Chain Wear Indicator can help identify a worn chain and save you money - worn chains will not only shift poorly but they wear sprockets and chainrings at an accelerated rate. The CC3.2 is a "go, no go gauge designed to accurately indicate when a chain reaches 0.5% and 0.75% wear, the points at which most chain manufacturers suggest replacement for the new super narrow 11 and all other (7, 8, 9 & 10 speed) chains respectively as per most manufacturer's recommendations. The latest 3.2 version of this tool is longer for added accuracy and is made from precision, laser cut steel for long life and quality.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fastIf the 1% side fits into the chain, the chain is worn out and should be replaced immediatelyMade from precision, laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
The Park Tool Chain Gang Cleaning System contains everything needed to quickly and easily clean the chain, cassette and chainrings. The Cyclone Chain Cleaner makes easy work of getting your chain clean and the Gear Clean brush allows you to clean the rest of your drivetrain such as your chainring, cassette and jockey wheels.Prolong drive train life with this excellent kitContains a Cyclone chain cleaner, Gear Clean brush, and 8 oz. of CB2 Citrus Chain Brite cleaning fluidEverything you need to keep the drivetrain system clean and running super smoothSuitable for derailleur gear, hub gear, and single-speed bikesMade in the USA
The Park Tool Chain Gang chain cleaning system contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. It contains a CM-5.3 Cyclone Chain Scrubber, GSC-1 GearClean Brush and 8 oz. bottle of Bio ChainBrite.
An accurate way to check for wear of roller and pin on chains1% of wear is enough to affect chainrings and sprockets and allow shifting performance to deteriorateJust insert the chain Checker's pins into two links press the swing arm gauge and then check the gauge window for an accurate readingReads wear from 0.25% to 1%10-speed compatible