The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight.Key Features:Seamless integration with the 2019 Venge frame and hidden cables.,Optimized for use with the S-Works Aerofly II handlebars for integration.,Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage.,Extremely stiff for responsive handling and out of the saddle sprinting.,Approximate weight: 207g (100mm).,80-140mm length options.,6 and 12 degree rise options..
SRAM Alloy GXP Road/MTB Bottom BracketSuitable for road or mountain bike use, this SRAM bottom bracket is equipped with Gutter Seal technology, which significantly improves protection from wet weather and reduces drag on the seals. SRAM has given it a revised, cleaner look with its redesigned, forged cup. The SRAM Alloy GXP Bottom Bracket brings a new standard in external bearing performance as the custom steel bearings, sealed cartridge bearings, and tungsten finish offer a high-end, reliable bottom bracket.Features: Use: Road or MTB Compatible with SRAM and Truvativ chainsets only Gutter Seal technology Improved tool engagementSealed cartridge bearingsCustom steel bearingsTungsten finish Compatibility (check your bike's frame first):68/73mm for most MTBs, 83mm for many Downhill bikes, 70mm for many Italian road bikesTechnologies:GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crank arm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long-lasting ride.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Alloy GXP Road/MTB Bottom BracketSuitable for road or mountain bike use, this SRAM bottom bracket is equipped with Gutter Seal technology, which significantly improves protection from wet weather and reduces drag on the seals. SRAM has given it a revised, cleaner look with its redesigned, forged cup. The SRAM Alloy GXP Bottom Bracket brings a new standard in external bearing performance as the custom steel bearings, sealed cartridge bearings, and tungsten finish offer a high-end, reliable bottom bracket.Features: Use: Road or MTB Compatible with SRAM and Truvativ chainsets only Gutter Seal technology Improved tool engagementSealed cartridge bearingsCustom steel bearingsTungsten finish Compatibility (check your bike's frame first):68/73mm for most MTBs, 83mm for many Downhill bikes, 70mm for many Italian road bikesTechnologies:GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crank arm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long-lasting ride.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Axle Maxle Stealth Rear 12X Length 180mm - Thread Length 20mm - Thread Pitch M12X1.75 - Boost Frames
This bottom bracket will keep pedals insulated and turning smoothly. SRAM uses gutter seal technology that vastly improves sealing against the elements while reducing seal drag. The GXP system uses two bicycle-specific cartridge bearings and eight seals for a smooth and long lasting ride.
SRAM BB GXP Team Cups English Thread inc Bearings 73/68 - BBAS4500
SRAM DUB BSA Bottom BracketThe SRAM DUB BSA Bottom Bracket is the single, unified replacement for both 30mm and 24mm crank spindle and bottom bracket systems. The Durable Unified Bottom Bracket (DUB) system features a 28.99mm crankset spindle/inner bearing diameter alongside incredibly lightweight BB30 bearings and a strong crank spindle with all the advantage of the 24mm bottom bracket systems high-quality.Precise Bottom Bracket, Spindle and Bearing EngagementThe precise bottom bracket, spindle and bearing engagement is the foundation of DUB technology. This superb merger creates the ultimate in stiffness, reliability and performance without sacrificing weight. SRAM has set a new standard for drivetrain performance, adjustability and reliability by creating a system that is not complicated to set up and fine-tune; meaning everyone can have the highest levels of performance, without the need to spend hours in the workshop/garage.Please Note: All SRAM DUB bottom brackets are only compatible with DUB type cranksets which have a 28.99mm spindle. Other cranksets with 30mm spindles will not fit into this bottom bracket and cranksets with 24mm spindles will be too small for it.Features:Material: AluminiumCompatible Frame Standard: Birmingham Small Arms (BSA) Threaded 68/73mmCompatible Crankset Standard: SRAM DUB cranksets onlyWeight: 76gPart No: BB-DUB-BSA-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM DUB BSA Bottom BracketThe SRAM DUB BSA Bottom Bracket is the single, unified replacement for both 30mm and 24mm crank spindle and bottom bracket systems. The Durable Unified Bottom Bracket (DUB) system features a 28.99mm crankset spindle/inner bearing diameter alongside incredibly lightweight BB30 bearings and a strong crank spindle with all the advantage of the 24mm bottom bracket systems high-quality.Precise Bottom Bracket, Spindle and Bearing EngagementThe precise bottom bracket, spindle and bearing engagement is the foundation of DUB technology. This superb merger creates the ultimate in stiffness, reliability and performance without sacrificing weight. SRAM has set a new standard for drivetrain performance, adjustability and reliability by creating a system that is not complicated to set up and fine-tune; meaning everyone can have the highest levels of performance, without the need to spend hours in the workshop/garage.Please Note: All SRAM DUB bottom brackets are only compatible with DUB type cranksets which have a 28.99mm spindle. Other cranksets with 30mm spindles will not fit into this bottom bracket and cranksets with 24mm spindles will be too small for it.Features:Material: AluminiumCompatible Frame Standard: Birmingham Small Arms (BSA) Threaded 68/73mmCompatible Crankset Standard: SRAM DUB cranksets onlyWeight: 76gPart No: BB-DUB-BSA-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Complete Stay Strong x Bengal disc brake system. Kit includes, Lever, Cable and Caliper. Rotor and bolts. All Stay Strong designed and branded. Designed for BMX using a 120 rotor. Fluid - Mineral Oil.
Collab race gloves from Stay Strong X Fist. Minimalistic lightweight design for maximum performance and feel. Sublimated 4-way stretch twill spandex upper featuring full breathability and supreme comfort single layer Clarino palm for maximum feel and control. Spandex finger gussets for ultimate flexibility and dexterity. Touch screen conductive index finger and thumb and custom fist closure offers a broad range of adjustment to keep your gloves secured.
Collab race gloves from Stay Strong X Fist. Minimalistic lightweight design for maximum performance and feel. Sublimated 4-way stretch twill spandex upper featuring full breathability and supreme comfort single layer Clarino palm for maximum feel and control. Spandex finger gussets for ultimate flexibility and dexterity. Touch screen conductive index finger and thumb and custom fist closure offers a broad range of adjustment to keep your gloves secured.
The Sunday Forecaster model was designed to ride, feel and look like a truly pro-level bike without breaking the bank. Brett Silva's signature Forecaster model is spec'd to his tastes with signature Odyssey Broc Grips and his signature Sunday Silva Pivotal Seat. The Forecaster frame and forks boasts 100% chromoly construction for maximum strength, removable brake hardware gives you the option to run the bike how you like. Signature parts aside, Silva's signature is loaded with incredible Odyssey parts, from the Clutch V2 Freecoaster Hub, the Twisted PC Pro pedals to the Path Pro Tyres. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 13.2" - 13.5" HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: Sunday Forecaster, 20" fork w/2-piece chromoly steerer tube and welded pre-load BARS: Sunday, 2-piece STEM: Sunday Freeze front load, 48mm HEADSET: FSA integrated conical, 1-1/8" BRAKE MOUNTS: BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 36H, low-flange, sealed, 3/8" female axle FRONT RIM: Odyssey Stage 1, 20", 36H REAR HUB: Sunday 36H, sealed, 14mm male axle w/9T driver REAR RIM: Odyssey Stage 1, 20", 36H TYRES: Odyssey Path Pro OEM, 20" x 2.4" (Front & Rear) SPROCKET: Sunday Sabretooth V2, 25T, steel CRANKS: 170mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Odyssey Twisted PC Pro SEAT: Sunday Silva, Pivotal GEARING: 25/9 WEIGHT: 26.78lbs ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) High-quality Chromoly construction Fitted with high-quality aftermarket components High-quality aftermarket tires ###shogun-image-section###