Shimano's new Direct Mount Rear Derailleur system gives more space around the rear frame dropout resulting in easier rear wheel removal but also allows frame designers to shorten chain stays, increase axel sizes and move suspension pivots:Direct Mount gives a simpler, cleaner look,Deore XT Shadow Dyna-Sys 10-speed rear derailleur delivers reliable and precise shifting with a stiff and lightweight open design,Shadow features a super low profile design that reduces the risk of damage from trail side hazards,Shadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shifting. This can be switched off to remove the wheelDirect cable routing prevents snagging from any trail side hazards,All-alloy construction leads to lower weight without compromising strength and durability,Four fluorine-coated link pin bushings make this one of the slickest shifting derailleurs on the trails,High rigidity wide outer link braces the pulley body to increase pivot joint rigidity resulting in a crisp shift,Strong return spring for a positive shifting feel,Durable sealed bearing pulleys,35T capacity GS cage.
The Troy Lee Designs Raid Knee Guards are hardy enough to offer you peace of mind on the gnarliest trails, but also comfortable and ventilated enough to be a pleasure to wear for a full day of shredding. Constructed from vented Neoprene, with D3O® reinforcement, the sleeve will defend your lower thigh, knee joint and shin. Thanks to strategically placed grippers, you can count on it to reinforce your leg in the areas where it’s most needed. In particular, this guard features abrasion resistant pads at the side and over the kneecap and offers side impact protection. The best knee guards are more than barriers, though, they’re wearable so that they’ll always be in place when you need them. The breathable mesh back, thoughtful areas of padding and adjustable fit of the Raid Knee Guard mean it will keep your leg dry, snug and protected.Meanwhile, a flex gusset will allow your leg to straighten without resistance, while a rear compression band stimulates the muscles and encourages function. As a further bonus, the Raid Knee Guard comes with its own protective, mesh lined bag that will keep it fresh between sessions.Key FeaturesD3O® liner CE certified to EN 1621-1 Level 1 standard,Made from vented Neoprene,Breathable, wicking mesh rear panel,Tough, abrasion-resistant kneecap and side pads, side impact protection,Held in place by silicone gripper band at upper leg,Reinforced by adjustable Velcro strap,Sold as a pair, left and right.
The EVZero Blades Black Photochromic Sunglasses deliver the maximum protection with a large, toric shield lens that is constructed from Plutonite® which is incredibly rugged, anti-abrasive and anti-impact. The lens also comes with photochromic technology which automatically adapts the coverage, of the lens, to your surroundings – lightening in darker conditions, and darkening in brighter conditions. The performance sunglasses deliver a lightweight, all-day comfortable feel thanks to a rimless design that puts your vision first. Meanwhile, the Unobtainium® nosepads and temples stabilise the fit, increasing grip against sweat and environmental moisture. Lens Specifications Light Transmission: 23% Light Transmission (Activated): 23% Light Conditions: Changing Conditions Contrast: Neutral Base Lens Colour: Clear
Oakley EVZero Blades Photochromic SunglassesPutting vision first, the Oakley EVZero Blades Photochromic Sunglasses have a large, expansive toric shield lens of Plutonite®. Additionally, the lens is adaptive, it changes its tint to best suit the lighting in your surroundings – in bright lighting it darkens, and in lower lighting environments the lens clears.The EVZero sunglasses have a fashion-forward rimless style that also reduces the weight of the glasses for long-lasting comfort. Meanwhile the Unobtainium® nosepads and temples increase grip against sweat while cushioning the fit for further comfort. Lens SpecificationsLight Transmission: 23%Light Transmission Activated: 23%Light Conditions: Changing ConditionsContrast: NeutralBase Lens Colour: ClearFeaturesA toric shield of Plutonite® in a rimless design for a fashion-forward styleRimless design reduces frame mass to provide durability and all-day comfortUnobtainium® nosepads and temples increase grip to help keep eyewear securely in place without sacrificing comfortBuy Oakley Sport Sunglasses from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stay comfortable on long gravel adventures with the Allroad Supercomfort Racing, featuring Xsilite rails. Built specifically for long gravel trails, the Allroad Supercomfort Racing, with Xsilite rails, brings comfort and support in any situation. The narrow front end allows your legs to move freely while pedalling with the wider rear end and slightly lifted edges providing plenty of ischiatic support during long cycles. The extra padding of the Supercomfort allows you to stay in your saddle for longer and gives an extra layer of protection on extremely demanding terrain. Plan rides far off the beaten track with the Allroad Supercomfort Racing. Weight: L3 213 g Dimensions: L3 146 x 268 mm Rail: Xsilite Intended use: Gravel & Bikepacking
The Troy Lee Designs Rockfight CE Chest Protector isn’t your typical chest protector. TLD has taken its standard Rockfight but souped it up to withstand whatever the elements throw at you.The base Rockfight has built-in EPP on the chest and spine that manages low-speed impacts but the Rockfight CE combines it with a removable, flexible D30 back insert for harder impacts. In the process, Troy Lee Designs has created a chest protector that exceeds CE EN1621 Level 1 for impact absorptions.The Rockfight CE has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight CE achieves its superb protection while ensuring an ergonomic and breathable design. It has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris, Flexible D30 back inserts that exceed CE EN1621 Level 1 for impact absorption, Advanced integrated EPP in key impact zones on chest and spine, Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility, Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment, Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
The Troy Lee Designs UPL 7855 is a hot weather protective undershirt with a versatile pocket design protection system ideal for warm weather runs.
Radio worked hard for over a year trying to develop the toughest BMX cranks possible and couldn't be more stoked on the result. Machine and rider tested, The Destro cranks are insanely strong, without excessive weight. These bad boys come with a 2mm sealed mid bottom bracket allowing you to bolt them on and get shredding as soon as possible. The larger 22mm spindle keeps these things stiff, while the heat treated arms mean you won't be bending these things anytime soon. ###section### Product Specs Type: 3 piece Spindle Diameter: 22mm Drive Side: Left & Right Compatible Includes BB Bearings: Yes Weight: 935g / 33oz (175mm) ###shogun-image-section###
The Flip bracket offers our new generation fit range paired to the classic Profile Design spring loaded arms allowing the armrests to sit up, out of the way when not in use.Pairing this bracket with the ergo armrest offers industry leading fit options and greater comfort,With the 50a extensions this aerobar encourages a neutral wrist angle and is designed to be super comfortable,The Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing,There are 80 distinct position options achievable just by moving the armrests,Fit information: Armrest Offset -85mm to -17.5mm in 7.5mm steps, Armrest Width 112mm to 280mm in 18.5mm steps, Armrest Stack 40mm,Weight: 587g.
Customizable Under ArmorVersatile pocket design with removable protection armor pieces for ultimate rider customization (chest, back, rib cage, abdomen, shoulder, arms)UPL 7855 HW Shirt Features:Upper Protection Layer 7855 Hot Weather,Wide neck opening for added comfort,Opem armpit design for maximum ventilation and mobility,Anatomical design integrated protection zones,Integrates seamlessly with neck braces,Patent pending.
Packing a Protective Punch Weighing in at a gravity-defying 690 grams (size M/L), the Stage MIPS Helmet is the lightest full-face mountain bike helmet in its class. However, not for a moment should you think lightweight means lack of protection. Not a bit of it. The Stage packs a heavyweight flurry of protective punches too. To counter both slow and fast speed impacts it uses Dual-density EPS and EPP foam, absorbing impact forces should you take a tumble. It doesn't end there though. It also features brain-protecting MIPS technology, more detail on that further down. A tough outer Polylite shell optimises strength and adds overall durability - perfect for a helmet that will see a lot of use. A Polyacrilite injected chin bar with EXOskeleton also adds strength without sacrificing weight. Designed for Enduro but passing DH certification, you can be confident to push your mountain biking limits in this lid. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Comfort Built-in So protection is first-rate, what about comfort? Yes, that's fantastic too. 11 high-flow vents let fresh air rush into the Stage, with internal channelling and 14 exhaust ports creating perfect airflow. Uphill pedalling is now more cool and comfortable than ever. Inside, the contoured 3D XT2 cheek pads and washable X-Static liner create the perfect fit. And with 2 liners, 3-sets of cheek pads and 2-neck rolls you can always get the right fit and feel.
Sidi Eagle 10 MTB ShoesThe Sidi Eagle 10 MTB Shoes deliver premium performance for mountain biking and off-road riding, whether that's between the tape at a race or on a big-mountain adventure. With their stiff sole unit and twin dial adjustment, comfort and direct power transfer are a given but you'll also enjoy legendary Sidi durability. A snug and comfortable fit are provided by the technical MicroTech upper. This advanced material is flexible to provide a moulded fit for instant comfort from the box while also being remarkably tough. It's also water repellent, brushing off muddy puddles and damp riding conditions if the weather turns against you. It is also eco-friendly. Meanwhile, to the heel, the reinforced heel cup gives a secure fit for optimal stability when you're driving power through your pedals. This supple upper is closed via the Soft Instep Closure 4 system and Techno 3 dial systems. A wide EVA thermo-formed padded strap spreads pressure evenly across the upper foot, and with adjustment both side, a firm and comfortable fit are easy to tune in. To the midfoot the second Techno 3 dial takes care of securing your foot perfectly in place for outstanding comfort with no fuss. RS17 MTB SoleThe RS17 MTB Sole gives a stiff and stable pedalling platform through which you'll enjoy smooth and effortless power transfer as you speed along the trail. A dialled in amount of flex also make them comfortable over rougher terrain while also making walking easy too. If you are off the bike then the MTB specific tread provides sure-footed traction even on the muddiest of ground. Toe studs can also be added to boost grip and the replaceable toe tread gives the shoes increased lifespan. Cleat GuidanceThese shoes are compatible with MTB pedal systems, which use the 2-bolt cleat standard (SPD standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Please Note: Sidi recommend purchasing one whole size up from your usual fitSoft Instep Closure 4Tecno 3 dial adjustersRS17 MTB SoleSidi Heel CupReplaceable toe padUpper: Microfibre water-repellent2-bolt cleat compatibleBuy Sidi Shoes from Chain Reaction Cycles, the World's Largest Online Bike Store.