The Troy Lee Designs Youth Rogue Knee/Shin Guards will defend the knees and shins of young gravity addicts as they hurl themselves downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to disperse through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce the front of young rippers’ legs while allowing free movement, so that they’ll barely notice they’re wearing a guard. They’ll also be able to cinch it round their leg snugly using two adjustable straps. Perfect for giving downhill stars of the future the confidence they need to ride their best, the Youth Rogue Knee/Shin guard comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer ,Soft, EVA foam inner layer,Two adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Troy Lee Designs Raid Knee Guards are hardy enough to offer you peace of mind on the gnarliest trails, but also comfortable and ventilated enough to be a pleasure to wear for a full day of shredding. Constructed from vented Neoprene, with D3O® reinforcement, the sleeve will defend your lower thigh, knee joint and shin. Thanks to strategically placed grippers, you can count on it to reinforce your leg in the areas where it’s most needed. In particular, this guard features abrasion resistant pads at the side and over the kneecap and offers side impact protection. The best knee guards are more than barriers, though, they’re wearable so that they’ll always be in place when you need them. The breathable mesh back, thoughtful areas of padding and adjustable fit of the Raid Knee Guard mean it will keep your leg dry, snug and protected.Meanwhile, a flex gusset will allow your leg to straighten without resistance, while a rear compression band stimulates the muscles and encourages function. As a further bonus, the Raid Knee Guard comes with its own protective, mesh lined bag that will keep it fresh between sessions.Key FeaturesD3O® liner CE certified to EN 1621-1 Level 1 standard,Made from vented Neoprene,Breathable, wicking mesh rear panel,Tough, abrasion-resistant kneecap and side pads, side impact protection,Held in place by silicone gripper band at upper leg,Reinforced by adjustable Velcro strap,Sold as a pair, left and right.
The Rockfight Chest Protector is the lightest upper body protection Troy Lee Designs has ever created. Packed full of the features, the mountain bike chest protector incorporates strategically placed EPP on the chest and spine while allowing unrestricted airflow and complete fit customisation.The Rockfight has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.Ultra-ventilated protective plates in the back are paired with channelled bio-foam for increased laminar airflow, so air travels smoothly cooling you better.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris,Advanced integrated EPP in key impact zones on chest and spine,Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility,Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment,Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
Troy Lee Designs’ all-new A3 helmet builds on the success of the TLD A2 helmet to deliver the ultimate in full coverage premium trail helmets.Safety is front and centre with the A3. The helmet is made from EPS and EPP foams for equal protection across high and low-speed impacts. The A3 uses MIPS technology to offer the best protection. The A3 also extends lower than previous TLD helmets, to offer the best lower head coverage.Every detail of the A3 has been obsessed over. The adjustable visor has goggle storage and attaches in three positions with magnets, so it is easy to move as well as avoiding any small parts breaking. The helmet closes with a V2 Fidlock-Magnetic Buckle for easy on and off. TLD has also made sure the helmet works with a vast array of optics making it a great choice for riders, regardless of eyewear choice.Key FeaturesThe latest evolution in TLD trail helmets with MIPS Technology,Adjustable visor with goggle storage and Automatic Magnet System,EPS and EPP for high-speed and low-speed impact energy management,Smart shear visor screws to prevent damage to the helmet,TLD V3 precision fit with 3 levels of height adjust,TLD’s deepest coverage half shell helmet,16 vents with optimised channelling for breathability,Removeable Sweatglide system for hygiene,2-piece antimicrobial and quick dry liner,V2 Fidlock-Magnetic Buckle,Weight: ~375g.
After years of research and development, Troy Lee Designs introduced the A1 mountain bike helmet in 2013.This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. Key Features: Reinforced polycarbonate shell in-molded with the EPS liner extends down the sides and back of the head for maximum protection and durability, 8 pressurized intake passages draw in cool air for maximum ventilation, 8 rear vacuum vortex outlets help exhaust and draw heat from the head, Triple position adjustable retention system allows customized fit for various eyewear, head shape and riding styles, Single-piece, ultra-plush, removable and washable comfort liner made of anti-microbial moisture-wicking material for a dry, comfortable feel, Full-spectrum adjustable moto inspired visor with anodized aluminum hardware.
Design and FunctionD3 Fiberlite features many of the racing-derived features found on its top-shelf D3 Carbon and Composite siblings. The D3 Fiberlite sources a lightweight fiberglass shell with wind-tunnel proven aerodynamics and an efficient ventilation system. The Fiberlite also delivers a comfy, secure fit from its 3D cheek pads, as well as TLD's signature styling and attention-grabbing graphics. Thanks to the D3 Fiberlite, the most decorated helmet in professional racing is now available for riders who crave factory performance. Key Features: Intended for BMX, Downhill or All-Mountain use,Lightweight Fiberglass shell construction with an overall helmet weight of 1225 grams,20 high-flow intake and exhaust ports for maximum ventilation,Added EPS and new head-form shape for improved impact performance,Quick-release cheek pads for emergency helmet removal,Exceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15,Not intended for use with motorized vehicles.
If you’re a gravity addict, the Troy Lee Designs Rogue Knee/Shin Guards will defend your knees and shins as you hurl yourself downhill.Like a standard cycling helmet, it’s composed of a hard-shell plastic outer layer that disperses impact over a large area, while allowing heat and moisture to disperse through spaced vent holes, and a soft EVA foam inner layer, which absorbs and lessens that impact. The two layers, working together as part of a highly flexible, comfortable and breathable pad, will reinforce your leg while allowing it to move freely, so that you’ll barely notice you’re wearing a guard. You can also cinch it round your leg snugly using two adjustable straps.Perfect for giving you the confidence to ride your fastest, it comes with its own protective, mesh lined bag that will keep it fresh between sessions. Key Features:CE certified to EN 1621-1 Level 1 standard,Ventilated hard shell plastic outer layer,Soft, EVA foam inner layer,Adjustable elastic strips for a secure fit,Sold as a pair, left and right.
The Flowline SE MIPS Helmet, Troy Lee Designs’ new half shell trail helmet, includes some of the best technology Troy Lee Designs has to offer. Sporting a modern, minimalist look, it is designed to keep you safe and comfortable on the trail.All in all, this helmet offers incredible value, protection, comfort and performance in the form of a sleek, understated bi-colour helmet that will nonetheless make a statement on the trails or in the bike park, thanks to Troy Lee’s famously contemporary styling.Key FeaturesWith MIPS technology to protect against rotational forces,Dual density EPS foam guards against high and low speed impacts,Outer shell strengthened by full wrap, in-mould construction,Extended coverage guards the back of your head,Easy to size using the TLD precision fit system,14 high-flow ventilation ports keep your head cool and dry,With soft, antimicrobial comfort liner,Fidlock magnetic buckle system of easy on-off,With 2-way adjustable, screwless visor.
Standing out from the crowd with Troy Lee’s legendary styling, the Flowline MIPS Helmet features much of Troy Lee Designs’ best technology at a low price. Sporting a modern, minimalist look, it is designed to keep you protected and comfortable on the singletrack.This is a great value, modern and clean-looking helmet that offers incredible safety features, a great fit and all-day comfort in a package that is sure to attract admiring looks on the trail.Key FeaturesMIPS technology to protect against rotational forces,EPS foam guards against high speed impacts,Outer shell strengthened by full wrap, in-mould construction,Extended coverage guards the back of your head,Easy to size using the TLD precision fit system,14 high-flow ventilation ports keep your head cool and dry,With soft, replaceable liner,Bears 2-way adjustable, screwless visor.
Troy Lee's best-selling Jersey is easy to wear and with supreme comfort. The Skyline Long Sleeve jersey is a relaxed fit technical jersey made of newly developed poly spandex blend with a new fit combined with colours and graphics that are easier to wear for riders of all types.Key Features: Relax fit mountain bike jersey, casual in nature, technical by design ,Compact left side zip pocket, with reflective TLD logo. ,Optical wipe inside .Materials: 92% Polyester/8% Spandex ,Moisture-wicking/quick dry ,Fabric weight 140gm/7.9oz ,Fabric is certified as Bluesign approved.
Key Features: Water resistant trail jacket, Materials - 91% polyester, 9% spandex ,Compact - can fold up into bag and can be stored on bike or pocket .
Already without rival in the number of professional Downhill and BMX race wins collected over the years. Focusing on how the kit fits and feels on the bike we have revised articulation points and used lighter, more durable materials in the pants and shorts. All helping to make the Sprint kit even more race ready. Key Features: TLD Race Fit - Mid-rise waist, roomier cut with a balance of performance and durability, 90% Polyester/10% Spandex construction is both lightweight and durable, Redesigned knee zone features a slimmer profile without inhibiting protection while permitting improved articulation for better movement and pedaling capabilities, More durable stretch fabric across the quads and around the rear of the shorts provide additional abrasion resistance in the event of a crash, Optimized rear mesh panels along the calves improve range of motion while increasing ventilation, Increased resistance to chain abrasion through sonic welded thermo skin applied to the lower right inside ankle, New side waist adjusters with Velcro inset into the body of the waist band allow for fit adjustments to be quick and unobtrusive, Zipper flap design keeps mud and debris out, Single TLD embossed low profile snap button that wont get hung up on your jersey; Velcro backing ensures jersey stays tucked-in, Two strategically placed zipper pockets; 1 on the upper left leg, 1 positioned on the lower right hamstring area, Tapered lower leg design keeps pant away from chain/seat stays, Race fit engineered to accommodate base layer protection while maintaining maximum freedom of movement and pedaling, Fabric is certified as Bluesign approved .