Designed to keep you in control over even the most challenging terrain, the SRAM Level T disc brake has a super-tough construction. This consists of stamped alloy levers and stainless steel hardware. The lever is also reach-adjustable so you can set it up to your exact preferences. Also, if you run a SRAM drivetrain, it's MatchMaker™ compatible for combing with compatible gear shifters to help you tidy up your bike’s cockpit. This is a complete disc brake with lever, hose and caliper - it comes fully assembled, pre-bled and ready for use. Technologies: Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.
This SRAM Level TL disc brake matches an alloy DirectLink™ lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on. Intended Use: XC, Trail System: Open system Bend Zone™: Yes Ambidextrous: Yes Hardware: Stainless Steel Technologies: Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.
The SRAM Code RSC has larger fluid reservoirs and pistons and delivers massive amounts of power, reliable modulation, and unrivalled heat management for those extended descents and regular "drop the anchor" moments. Special Features: Tool-free Reach Adjust, Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatible Pad/Holder: Top-loading Intended Use: AM/DH/FR System: Open System Rotor Sizes: 140 (rear), 160, 170, 180, 200,203mm (sold separately) Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Bend Zone™: Yes Ambidextrous: Yes Stainless Hardware: Yes Please note: Centerline rotor NOT included Technologies: Contact Point Adjustment™: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™is also available and works with any split-clamp design and RockShox® PushLoc. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto-style without hassle PURE™ Bladder: SRAM’s new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink™: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. TPC Plus™ (Timing Port Closure): A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.
Powerful Hydraulic Braking Featuring a revised and updated design inside and out, this complete shifter/hydraulic brake system adopts some of SRAM’s best technologies. These include its award-winning HydroR technology, which delivers reliable braking power and control in all conditions. Easy and Efficient Shifting For optimum grip when shifting and quick and simple gear changes, the levers use DoubleTap Technology, which handles up and downshifts from the same lever. Also, to ensure any rider can feel comfortable with the levers, both the brake and shift levers are reach-adjustable. Technologies: HydroR™: Our award-winning HydroR™ technology is the fulfilment of the promise of better braking, more control, and improved performance in all conditions DoubleTap®: This makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.
Whether you're into cross country (XC) racing or just exploring the mountain bike (MTB) trails with your friends, the SRAM Level Ultimate disc brake is made to meet the challenges of today's most demanding races. It features a reliable carbon construction, which allows you to benefit from its fantastic strength to weight ratio. SRAM has also equipped this model with pivot bearings, so you can enjoy a crisp lever feel as well as a fatigue-free riding experience. Engineered for easy installation and maintenance, this is a great choice of upgrade for off-road riders that want powerful and precise braking on every ride. Level Ultimate is the master of two forces - power and weight in one sleek, durable design. In this build, SRAM took every gram to task. Carbon fibre lever blades for crisp, clean pulls, an updated two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips. Technologies: Heat Shield: The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. Bleeding Edge: Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimise air contamination and fluid loss. Direct Link: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimized specifically for cross-country and light trail use. Power and modulation are delivered via the Level TLM’s alloy lever blade, DirectLink™ actuation, DOT 5.1 fluid and SRAM's new two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and BLEEDING EDGE™ technology makes maintenance incredibly simple, so your brakes feel great all day — every day. Please Note: A handlebar clamp is not included with this item. Please Also Note: These levers are can be used as a left hand or a right hand brake as they have an ambidextrous design and a bleed port on both sides. Caliper Design: Incorporates technologies developed on Guide Ultimate’s S4 caliper Moly-coated aluminum pistons for consistent rollback and easy set-up New seals, gland geometry and piston coating for improved rollback, results in easier setup and improved consistency Heat Management: piston insulators and Heat Shield reduce operating temperature and minimize heat transfer to the caliper body Bleeding Edge: new bleeding adapter and porting for quick, mess-free bleeding Two 21mm pistons Monoblock construction. Bleeding Edge Technology: New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding. Dedicated bleed adapter for the Level Ultimate/TLM and S4 calipers (Guide Ultimate) plugs into the bleed port and seals the system to minimize air contamination and fluid loss. Timing Port Closure A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Contact Point Adjust Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Piggyback Reservoir The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Direct Link SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. Reach Adjust Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. Dead Band This refers to the time between the moment you engage the lever and when the pads contact the rotor. SRAM technologies such as SwingLink balance the dual demands of minimizing deadband and optimizing modulation for braking finesse and control. Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
This trail-ready MTB hydraulic disc brake comes equipped with a high-quality carbon fibre lever blade for the perfect balance of stiffness, durability and low weight performance on your ride. SRAM has also kitted out this version with an anodised finish for additional protection against wear and corrosion, making it ideal for all-weather and trail conditions. Another highlight is its steel-backed organic brake pads, which ensure dependable braking as you weave your way from trail to trail. Coming complete with a wide range of technologies, this is a great choice of upgrade for smooth and reliable braking performance wherever your next trail adventure leads you. Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. The brand obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride. For the Ultimate, SRAM held nothing back. The brand's engineers sculpted the finest materials - titanium and carbon fibre - to make this its lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance - its test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a revised pad compound with bite. - Pivot bearings for crisp lever feel and a fatigue-free ride. - SRAM's best power to weight ratio in a four-piston brake. Technologies: Bleeding Edge: With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5020.458.230 2X Black 1550mm 00.5020.457.210 2X Black 1450mm
Whether you're shredding your favourite mountain bike (MTB) trails with your riding buddies or exploring new routes on your own, this hydraulic disc brake is engineered for powerful and consistent braking operation. It features a high-quality aluminium stamped lever blade, which gives it an excellent balance of strength and durability as you conquer your way around the mountain. SRAM has also equipped this version with steel-backed organic brake pads for dependable braking and control as you weave from trail to trail. Coming complete with a range of performance-enhancing technologies, this is a perfect upgrade for adjustable and precise braking on your MTB adventures. Hydraulic Disc Brake with Reach Adjust Developed for ease of use, this model features an adjustable lever reach, so you can fine-tune the gap between the lever blade and your handlebar. This makes it can be set-up to fit any hand size or riding style, while giving you complete control over your ride as well as increased comfort when braking. Another highlight is its DirectLink lever design, which produces a solid, positive feel when you squeeze the lever to engage the brake. As a result, it delivers precise control as you charge across demanding trail conditions. Level T capitalises on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimised brake set that keeps your capital in the bank. This budget-minded, MatchMaker compatible brake set provides all the power of its siblings, keeping you in complete control. - Same proven lever technologies as Guide-piston, seals, reservoir and bladder. - Compact lever body with DirectLink. - Same power as Level Ultimate, Level TLM and Level TL. Technologies: DirectLink: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Expandable Bladder: SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Manufacturer's Part Number: 00.5019.913.720 & 893.090 Black 800mm 1450mm
This mountain bike (MTB) hydraulic disc brake is equipped with a high-quality carbon lever blade with a forged aluminium lever body and caliper, which gives it a perfect balance of strength and durability without weighing down your ride with unnecessary weight. Coming kitted out with more caliper stiffness and an updated pad compound with bite, it also includes many of SRAM's finest technologies, so it's ready to deliver dependable performance wherever your next adventure takes you. Every trail and every rider is unique. To meet the infinite variables SRAM created the G2: powerful, consistent, reliable. SRAM obsessed over heat management, modulation, materials and design. They made lever-reach and contact points adjustable to fit every hand. And they tested the whole system to ensure it delivers confidence-inspiring performance and control, every ride. For the Ultimate, SRAM held nothing back. Its engineers sculpted the finest materials using titanium and carbon fibre to make this the brand's lightest four-piston brake ever. Power, modulation and lever feel set a new standard. Personalisation is quick and intuitive. And for performance, its test riders didn't dub it the "Mini-Code" for nothing. Additional Item Top Features: Number of Pistons: 4 Recommended Rotor Type: 1-piece CentreLine Rotor Compatibility: Front Option: 200mm; Rear Option: 180mm Rotor Included: No, available separately Clamp Included: Yes, MMX Clamp Hose Routing: Adjustable banjo Contact Adjust: Yes Caliper Construction: 2-piece Caliper Bleed Port: Bleeding Edge Hydraulic Fluid: DOT 5.1 Lever Pivot: Bearing Reach Adjust: Tool-free Hose Length: Front Option: 950mm; Rear Option: 2000mm Included: x1 Brake lever, x1 caliper and x1 MMX clamp (rotor/bracket sold separately) Single or Pair: Single Technologies: Bleeding Edge: With this revised caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customise the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Lever Pivot Bearings: Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adaptor technology for easy bleeds. Swinglink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimise deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Mini-Code Power: Code set the benchmark for braking power — and won a few championships, too. G2 brings it to the trail. SRAM call it “Mini-Code.” Manufacturer's Part Numbers: 00.5018.160.000 Polar Grey 950mm Front RH 00.5018.160.001 Polar Grey 2000mm Rear LH 00.5018.160.002 Gloss Black 950mm Front RH 00.5018.160.003 Gloss Black 2000mm Rear LH 00.5018.160.004 Multi Black/Rainbow 950mm Front RH 00.5018.160.005 Multi Black/Rainbow 2000mm Rear LH
Ready for hitting your favourite trails, this MTB hydraulic disc brake features a robust aluminium lever blade that provides durable and dependable braking operation on the toughest of rides. SRAM has also equipped it with a lightweight four-piston S4 caliper that uses four machined and moly-coated aluminium pistons to achieve consistent rollback and easy setup. In addition, its calipers heat shield insulation, Bleeding Edge porting and adaptor technology delivers easier bleeds. Coming kitted out with steel-backed organic brake pads, this model offers powerful braking modulation and control as you navigate your way around the mountain. Adjustable MTB Hydraulic Disc Brake G2 RSC is the half-ton pickup truck of the mountain bike brake world — dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And of course, the signature Guide lever-feel and contact-point adjustability ensure that this brake works great for every rider. The G2 RSC presents a rider-controlled offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. SRAM design its brakes to give each individual rider distinct control of their ride. - Added stiffness in the caliper and a new pad compound that offers more bite and really delivers the Mini-Code feel. - Engineered for easy installation. Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. S4 Lightweight 4-Piston Caliper: The all new S4 Caliper features four Machined and Moly-coated aluminum pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Numbers: 00.5018.161.000 Black Diffusion Front RH Front-RH 950mm 00.5018.161.001 Black Diffusion Rear LH Rear-LH 2000mm
They have the braking power to deal with the higher speeds, more aggressive use, and the added weight of your power assisted trail conquering weapon. Guide RE brakes feature a 4-piston caliper taken from SRAM's Downhill range and use the heat-resistant DOT 5.1 brake fluid, which prevents brake fade on those long descents. Special Features: Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatible Technology Highlight(s): TPC™ Plus, DirectLink™, DOT 5.1™ Pad/Holder: Top-loading Intended Use: E-MTB System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes Technologies: DirectLink™: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp-a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™is also available and works with any split-clamp design and RockShox® PushLoc. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. TPC Plus™ (Timing Port Closure): A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. DOT 5.1™: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.
This MTB hydraulic disc brake features a robust cast aluminium lever body and a forged aluminium caliper, which makes it capable of handling all the intensity that's associated with all-day epics in the mountains. SRAM has also equipped this version with tool-free reach adjustment, so you can easily tweak the distance between the lever and your handlebar for a more rider-tuned braking feel. Another highlight is its powerful organic brake pads that deliver an exceptional feel and bite as you weave between the trails at speed. The core of brake performance is consistency. Reliability. Trust. And with G2 R, SRAM focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed “Mini-Code” power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite. - Engineered for easy installation and maintenance. - Tools-free reach adjust for quick personalisation. Technologies: DirectLink: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. S4 Lightweight 4-Piston Caliper: The all new S4 Caliper features four Machined and Moly-coated aluminum pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Number: 00.5018.177.001 Black Diffusion Rear LH 2000mm 00.5018.177.000 Black Diffusion Front RH 950mm