From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. The RS model is the hooligan spec option in the range, with a host of upgrades to make it burlier than the rest. It features a +10mm RockShox Lyrik Ultimate RC2 forks (160mm) up front, a RockShox Super Deluxe Ultimate RCT rear shock, our award-winning carbon handlebars, 4 Pot Code RSC brakes (With Sintered Pads), a SRAM ASX Eagle Drive chain with Carbon X1 Cranks and DT Swiss XM1700 Spline 30 wheelset. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: RockShox Lyrik Ultimate Charger 2.1 RC2 160mm, 46mm Offset, BOOST, Debonair, Gloss Red • Shock: RockShox Super Deluxe Ultimate RCT, Custom 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted • Front Wheel: DT Swiss XM1700 Spline 30 27.5", 6 Bolt, 110x15mm • Rear Wheel: DT Swiss XM1700 Spline 30, 27.5", 6 Bolt, XD Driver, 148x12mm • Tyres: Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR • Crankset: SRAM X1 Carbon Eagle 12-Speed, 170mm, 32T, B148, DUB • Shifter: SRAM X01 ASX Eagle Wireless 12-Speed, Red • Rear Derailleur: SRAM X01 ASX Eagle Wireless 12-Speed, Red • Chain: SRAM GX Eagle 12-Speed • Cassette: SRAM X01 Eagle 12-Speed, CS XG1295 EAGLE 10-52T • Brakes: SRAM Code RSC Sintered Pads • Front Rotor: SRAM Centreline, 200mm • Rear Rotor: SRAM Centreline, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Revive Stealth with Triggy Long Lever; S:125mm; M:160mm; L:185mm; XL:213mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 13.67kg Medium Tubeless Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm Axle to Crown: 555mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Mega 297 Factory Carbon features a carbon frame that is equipped with long-travel Fox Factory Kashima coated suspension, a Shimano XT M8100 12-Speed groupset and DT Swiss EX1700 SPLINE 30 wheels. This stylish suspension bike offers an outstanding balance of speed, agility and playful performance and is suited for extreme terrain mountain bike riding, anywhere on Earth. DT Swiss EX1700 SPLINE 30 Wheels and Tubeless Ready Maxxis Tyres This exceptional race bike is kitted out with a Shimano XT 12-Speed drivetrain with a wide gear range that provides smooth and precise gear shifting performance. Shimano XT 4-Pot hydraulic disc brakes feature 4-pistons per-brake caliper that offers powerful and dependable all-weather braking performance. It also rolls upon DT Swiss EX1700 SPLINE 30 wheels wrapped in fast-rolling, Tubeless Ready Wide Trail Maxxis Assegai and Minion DHR tyres. And it is fitted with a Bikeyoke Divine Stealth with Brand-X lever. The MegaV4: Born Through Evolution, Not Revolution. For over 10 years, Nukeproof's best-selling model, the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, they never rest on their laurels with the introduction of the 4th generation Mega - Now available in an all-new mixed wheel size platform. World Class Enduro Race Bike Since 2009 the Nukeproof Mega has been the constant path of development to meet the evolving demands of our riders and customers alike. The Nukeproof team are relentlessly striving for improvements and with each generation, the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the Mega 290 Elite, you could forgive their designers for resting on their laurels. However, as Nukeproof products are developed between the tapes, there is a constant desire to hone and refine to give Nukeproof’s athletes and riders the best possible chance of standing on top of the podium. The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved Geometry and suspension kinematics on a brand-new all-carbon chassis. Most importantly you can now fit a water bottle inside the main front triangle. Long-Travel Full Suspension Carbon Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms help reduce the unsprung weight on the rear of the bike. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing and Geometry Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker. The Mega geometry is designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit Nukeproof have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Progressive and Supportive Suspension Platform To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They have redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down. Features: Frame: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, Orange Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted Front Wheel: DT Swiss EX1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss EX1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Maxxis Assegai 3C MAXXGRIP/DD/TR 29" x 2.5WT, Rear: Maxxis Minion DHR II 3C MAXXTERRA/DD/TR 27.5" x 2.4WT Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide with Bash, 28-36T, ISCG-05, Black Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 203mm Rear Rotor: Brakco 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; L:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 15.39kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 584mm Fork Offset: 44mm Rear Travel: 165mm Wheels Size: Front 29" / Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Mega 290 Factory Carbon offers outstanding speed, control and confidence when riding over all-terrain conditions. It also rolls upon 29" wheels wrapped in Maxxis 2.4" Wide Trail tyres and is equipped with a wide-ranging 1x12-Speed drivetrain and powerful Shimano XT M8120 4-Pot hydraulic disc brakes. DT Swiss EX1700 SPLINE 30 Wheels and Tubeless Ready Maxxis Tyres This exceptional race bike is kitted out with a Shimano's TX 12-Speed drivetrain that gives a wide gear range that provides smooth and precise gear shifting. Shimano XT 4-Pot hydraulic disc brakes feature 4-pistons per-brake caliper that offers powerful and dependable all-weather braking performance. It also rolls upon DT Swiss EX1700 SPLINE 30 wheels wrapped in fast-rolling, Tubeless Ready Wide Trail Maxxis Assegai and Minion DHR tyres. And it is fitted with a Bikeyoke Divine Stealth with Brand-X lever. The MegaV4: Born Through Evolution, Not Revolution. For over 10 years, Nukeproof's best-selling model, the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, they never rest on their laurels with the introduction of the 4th generation Mega - Now available in an all-new mixed wheel size platform. World Class Enduro Race Bike Since 2009 the Nukeproof Mega has been on the constant path of development to meet the evolving demands of our riders and customers alike. The Nukeproof team are relentlessly striving for improvements and with each generation, the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the Mega 290 Elite, you could forgive their designers for resting on their laurels. However, as Nukeproof products are developed between the tapes, there is a constant desire to hone and refine to give Nukeproof’s athletes and riders the best possible chance of standing on top of the podium. The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved Geometry and suspension kinematics on a brand-new all-carbon chassis. Most importantly you can now fit a water bottle inside the main front triangle. Long-Travel Full Suspension Carbon Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms help reduce the unsprung weight on the rear of the bike. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing and Geometry Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker. The Mega geometry is designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit of each size. To further aid the perfect fit Nukeproof has also used shorter seat tubes designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to improve climbing and descending capabilities. Progressive and Supportive Suspension Platform To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They have redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down. Features: Frame: Nukeproof Mega V4 290 Carbon, 160mm Travel, ultra-strong monocoque UD Carbon Fibre frame, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, Orange Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted Front Wheel: DT Swiss EX1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss EX1700 SPLINE 30, 29", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29" x 2.4 WT, 3C MaxxTerra DD TR Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide with Bash, 28-36T, ISCG-05, black Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 203mm Rear Rotor: Brakco 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X lever, M:160mm drop; L/XL/XXL:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 15.5kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 584mm Fork Offset: 44mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The ZX-1 EVO CRX eTap AXS Red is durable, lightweight and efficient. It features a top-quality carbon frame, superb components and sits at the pinnacle of competitive road racing performance. The SRAM Red drivetrain shifts gears with exceptional efficiency and crispness while its powerful hydraulic disc brakes ensure outstanding all-weather braking reliability. This ZX-1 EVO rolls upon carbon Reynolds AR58/AR62 race wheels that feature deep-section Tubeless Ready rims wrapped in Tubeless Ready Michelin Power Road TLR tyres. Lightweight, Strong and Stiff Road Race Bike The latest Vitus ZX-1 has been remastered, reimagined and reengineered. Enter, the EVO. Lighter, stiffer and faster. Stripped right back to the drawing board for a ground-up overhaul. Agile, Aerodynamic and Efficient Carbon Aero Frameset Vitus has done the testing and knows that the ZX-1 EVO exhibits up to 45% less drag than the previous model. But that means nothing until you unleash it outside and feel it for yourself. In the world of aero bikes, amongst all the jargon and data, it’s easy to lose sight of what really matters. That to feel fast is to be fast, and you can’t feel fast in a wind tunnel. The pleasure of speed only exists in the real world. Out there on the road. The sensation of putting power through your pedals and feeling the bike surge underneath you. And the faster you go, the easier it becomes. That’s where the ZX-1 EVO excels. That’s the bike working with you as the road snakes and the wind changes. That’s aero. SRAM Red eTap AXS Wireless Electronic 12-Speed Groupset The ZX-1 EVO doesn’t neglect everything for the sake of speed, since an uncomfortable rider cannot be fast and efficient. At least, not for long. Thanks to the one-piece carbon monocoque frame there are no points of weakness, no joints, so it is specifically engineered to be stiff where required and deliver comfort elsewhere, reducing harshness from the road for a more soothing ride feel. Reassuringly, there are no compromises on performance with the build. You’re getting top drawer wireless SRAM eTap groupset, deep-section aero Reynolds carbon wheels and fully internal cable routing so nothing is left out in the wind. The result? A bike with a stunningly clean aesthetic that carves through the air with outstanding efficiency. The performance geometry slots the rider into a naturally aerodynamic position, so whether racing flat-out, sprinting for road signs or charging on the front of the peloton, the EVO gathers momentum quickly and holds speed with ease. Vitus has made this bike fast. They know it rides fast. The rest is up to you. Features: Frame: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm axle, Flat Mount Fork: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, TapeRed Steerer, 100 x 12mm, Flat Mount, Size Specific Offset Headset: FSA/Vitus ACR, Sealed Bearings, 1.5" 36x45 degrees (FSA No.55ACR), Vitus/FSA Headset Cover Handlebar: Vision Metron 5D ACR Integrated Bar/Stem Combo, UD Carbon, XS:400mm S:400mm M:420mm L:420mm XL:420mm XXL:420mm Stem: Vision Metron 5D Acr Integrated Bar/Stem Combo, 125mm drop, - 6 degrees, XS:100mm, S:100mm, M:110mm, L:110mm, XL:120mm, XXL:120mm Grip(Tape): Vitus Super Grip, Anti Slip Wheelset: Reynolds AR58/AR62 DB Carbon Clincher Wheelset, 700c, Tubeless Ready, 24 Hole, 100 x 12mm Front, 142 x 12mm Rear, Centre Lock, XD-R Freehub Front Rim: Reynolds AR58, Carbon, TubelessReady, Disc Brake, Rim Depth: 58mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm Rear Rim: Reynolds AR62, Carbon, TubelessReady, Disc Brake, Rim Depth: 62mm, Inner Rim Width: 21mm, Outer Rim Width: 30mm Front Hub: Reynolds GW TR3, 100 x 12mm, Centre Lock Rear Hub: Reynolds GW TR3, 142 x 12mm, Centre Lock, XD-R Freehub Front Tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Rear Tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Spoke: Reynolds Sprint 2x Lacing, External Brass Nipples Chain: SRAM FORCE D1, 12 Speed Crankset: SRAM Red D1 DUB, 48/35T, XS:165mm S:170mm M:172.5mm L:172.5mm XL:175mm XXL: 175mm Bottom Bracket: SRAM DUB BB386, DUB for BB386EVO Front Brake: SRAM Red eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rear Brake: SRAM Red eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rotors: SRAM Paceline, Front:160mm, Rear:140mm Front Derailleur: SRAM Red eTap AXS, 2x12 Speed, Braze-On Rear Derailleur: SRAM Red eTap AXS, 12 Speed, Short Cage Left Shifter: SRAM Red eTap AXS, 2x12 Speed Right Shifter: SRAM Red eTap AXS, 12 Speed Freewheel: SRAM XG 1270 D1, 10-33T Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: ZX-1 EVO Aero, +20mm/-2mm Offset, XS/S: 300mm M/L: 350mm XL/XXL: 400mm Seat Screw: ZX-1 EVO Integrated, Internal Wedge System Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The NS Bikes E-Fine 2 is a hard-hitting hardcore electric mountain bike (E-Bike) that features NS Bikes all-mountain optimised geometry aluminium frame design and is kitted out for riding anywhere on Earth. NS has armed it with 160mm-travel RockShox 35 Gold forks and an X-Fusion coil rear shock to soak up the hits and knocks from rough terrain while maintaining exceptional control and traction. To keep the perfect balance of rolling speed, agility and grip, the E-Fine rolls upon a a 29" front and a 27.5" rear wheel. This wheelset comprises of Tubeless Ready Octane One Solar rims, NS Boost hubs and Schwalbe Big Betty BikePark tyres and is ideal for all-mountain, enduro and downhill trail riding sessions.Shimano Deore 11-Speed Groupset and Steps Electric Motor DriveNS has fitted it with a Shimano Steps electric motor drive that gives you a pedal-assisted push up the steepest hills and enables you to keep some energy in reserve for the descents. it is also armed with a wide-ranging 11-Speed groupset from Shimano that includes a Deore M5100 rear derailleur, an 11-46-tooth cassette and Deore 4-piston hydraulic disc brakes.Over the years NS Bikes tested a lot of E-Bikes but there was never any bike that truly stole their team’s heart. It took them a while to figure out what kind of bike they want to make for NS Bikes.All Terrain Optimised E-Bike PerformanceThey asked themselves, what makes an E-Bike great. If they put the motor on the side for a moment, it all comes down to the bike’s geometry and suspension, and these are the main points that they focused on. They looked for a geometry that works best on a motor assisted bike – and that is one that is not necessarily the same as on their Analog bikes. The geometry must be complemented by suspension that works perfectly on a bike that is inherently heavier than a normal mountain bike (MTB), and the tyres, brakes and cockpit all need to have more of a “moto” character.Back to the motor: there are no “bad” motor drive units on the market these days. What NS Bikes think is critical for their customers is reliability and easily accessible service if something goes wrong. That’s why they chose to work with Shimano. They have similar values as NS Bikes combined with excellent customer service all over the world.One of the key things NS noticed is that the NS crew doesn’t dig wimpy rides. So, NS made sure that the E-Fine is a big, burly machine. It’s fitted with the excellent SRAM 35 Gold RL fork, a coil shock and aggressive tyres. To make sure everyone could feel comfortable on the E-Fine they included an option to adjust the heigh of the bottom bracket to suit personal riding preferences.Even the most die-hard dirt jumpers, bike park riders and downhill racers in the NS Bikes company are lining up to borrow a prototype for a weekend of shredding – something that they haven’t seen previously with other E-Bikes that have been laying around in their office. Their team riders love the E-Fine, their close friends who would never consider going electric are changing their minds.
With a 130mm fork combined with 125mm of rear suspension, the Reactor ST combines the best of an enduro bike (long, low and slack) with the best of an XC Race bike (lightweight spec and efficient suspension) to create a sprightly yet seriously capable machine. Frame Construction: To optimise the weight, strength and stiffness, the Reactor 290 ST Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). Adjustable Geometry: The Reactor ST features a 66.8° (66.3° Low) Headangle atop a 76.3° (75.8° Low) seat angle across a 460mm reach on a Medium frame. We also offer the frame in Large and X-Large sizes. The Reactor ST frames feature the same “flip chip” design as the regular Reactor frame to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor ST into a more aggressive machine, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, we designed the four-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor ST some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor ST is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 125mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 34 Float, Factory Series, Kashima, Grip 2 Damper, 130mm, 44mm Offset, BOOST, Black • Shock: Fox Float DPS, Factory Series, Kashima, 3 Position, EVOL LV, Custom LCL, LRL, CMF tune, 210x47.5mm, Bearing End 1x 0.2 Spacer fitted. • Front Wheel: Reynolds TR309 XC Front 28h, 29", Center-Lock, 110x15mm • Rear Wheel: Reynolds TR289 XC Rear 28h, 29", Center-Lock, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Minion DHF 29”x2.3 3C MaxxTerra/EXO/TR, Rear: Maxxis Agressor 29”x2.3 MaxxTerra/EXO/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8100, 2 Pot Brake, Metallic Pads • Front Rotor: Shimano RT-MT800, 180mm • Rear Rotor: Shimano RT-MT800, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth w Shimano SL-MT500-IL Remote lever, M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 130mm Axle to Crown: 537mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x47.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The E-Sommet 29 VRX features an alloy frame equipped with a Shimano STEPS electric motor drive, long-travel RockShox suspension, a Shimano XT 1x12-Speed mechanical groupset and it rolls upon a 'Mullet' wheel platform. The ideal Enduro E-Bike for racing, bike park riding and all-mountain adventures, this bike offers an efficient, agile and comfortable all-day riding experience for trail-riding anywhere on Earth. Its electric motor drive provides a pedal-assisted push to help you climb steep hills and enables you to ride farther and with more energy in reserve for more fun on the descent. Additionally, it features a mixed-wheel platform with a 29" front and 27.5" rear wheel, giving the perfect balance of high-speed control, straight-line speed and all-terrain agility. Vitus has also fitted it with Tubeless Ready Nukeproof Horizon V2 race wheels wrapped in ultra-reliable, high-grip Maxxis Assegai and High Roller II tyres. Long-Travel Full Suspension Electric Enduro Bike The Vitus E-Sommet VRX Mountain Bike has all the trail-shredding performance and longer travel of a big-hitting 170mm Enduro bike, with a Shimano motor under the hood that kills the climbs and extends access to the most technical tracks. Ideal for Enduro Racing and All-Mountain Adventures Experience the rush - the brief snapshots that flood your senses and place you deep in the zone. The feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last run. The rush that pushes you to explore your limits without overstepping the mark. Miss the last uplift? Doesn’t matter. The smooth EP8 drive unit will soon have you back at the trailhead. This is for the full-face thrill-seekers and the diehards. This is why you do it. Shimano STEPS Electric Motor Drive and 'Mullet' Wheel Platform The E-Sommet VRX has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance over the back for steep ground and is more responsive through tight corners, while a 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike, and it’s easier to manual. The stability of the full aluminium frame with a seamlessly integrated battery is rock solid, so you won’t be taking just any line, this is a bike for taking the best line. A bike that tracks so accurately that it rewards you with speed and time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. The powerful STEPS system, with a punchy E8036 630wh internal battery, keeps you fresh on the climbs so you can go all-in on the descents. Powerful, Agile and Versatile Enduro E-Bike The E-Sommet VRX is a bike that you sit within, not perch on top. It’s a powerful rider position that puts you firmly in control. Eagerly build your confidence on the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through the challenging terrain of your favourite forest trails or dropping in on the lively descents of an e-Enduro, speed and traction come easily to the E-Sommet. It thrives in the chaos of steep and challenging trails. Bringing calm where all around there is frenzy. Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Key Features: E-Sommet Electric Enduro Platform: Internal battery frame design with new Shimano EP800 drive unit, improved suspension kinematics and updated geometry Frame Material: 6061-T6 Aluminium Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 167mm Rear Intended Use: Enduro RockShox Zeb Ultimate and Super Deluxe Select+ RT suspension Efficient Shimano STEPS EP8 motor with 630Wh internal battery Shimano XT 1x12 speed drivetrain Powerful Shimano XT 4 piston hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and High Roller II tyres Features: Frame: E-Sommet 6061-T6 Double Butted Alloy, Internal cable routing, post mount disc brake mounts, Boost hub spacing - 148mm x 12mm thru axle, Shimano STEPS compatible. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select+ RT, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Zeb Ultimate 29", 170mm travel, Charger 2.1 RC2 damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-589, ZS56/28.6 upper and ZS66/40 lower to suit 1-1/8" upper tapered to 1.8" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, 12mm Rise, L and XL: 800mm Wide, 25mm Rise Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2, 29" Front, 27.5" Rear, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing F/rim: Nukeproof Horizon V2, 29", 30mm Inner Rim Width, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 27.5", 30mm Inner Rim Width, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.5" WT, 3C MaxxGrip compound, DD casing R/tyre: Maxxis High Roller II, 27.5" x 2.5" WT, 3C MaxxTerra compound, DD casing Chain: Shimano XT M8100, 12 Speed, 118 Links Crankset: Shimano XT M8150, 34T Narrow Wide Chainring, 165mm Crank Length, 53mm Chain Line F/brake Set: Shimano XT M8120 Post Mount, Four Piston Caliper, Finned Sintered Pads R/brake Set: Shimano XT M8120 Post Mount, Four Piston Caliper, Finned Sintered Pads Rotors: Shimano RT76 or Brakco DR-02, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Trail Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 34.9mm Diameter Battery: Shimano E8036, 630Wh, Downtube Integrated Cycle Computer: Shimano EM800, Boost, Trail, Eco, Off and Walk modes Assist Switch: Shimano EM800, Mounted on left Drive Unit: Shimano STEPS EP8, Power Output 250W, Max Torque 85Nm Weight: Medium: 24.1kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Featuring GT’s e-tuned LTS platform with Shimano’s STEPS EP8 Drive Unit, Shimano 630Wh Battery, 29” wheels, 150mm of travel, and RockShox suspension the Force Amp+ is brimming with watts and ready to party up and down the trails. E-MTB with RockShox Suspension All set for day-long rides in the mountains, this electric mountain bike (E-MTB) features a rock-solid aluminium frame for maximum strength and durability as you weave your way from trail to trail. GT has also kitted out this model with RockShox front and rear suspension to smoothen out everything from the smallest of bumps to the biggest of hits when tackling unpredictable terrain conditions at speed. Its RockShox Yari RC suspension forks are equipped with Boost axle spacing and 150mm travel, so you can benefit from a more comfortable and controlled ride. In addition, its RockShox Deluxe Select R rear shock boasts a lightweight Debonair air spring for fantastic rear-end suspension performance, wherever your ride takes you. Shimano STEPS EP8 Drive Unit Take on the steepest climbs and toughest trails in full confidence with 85Nm increased maximum torque. Tackle the ascent with eyes firmly focused on the top. Drop into the descent with certainty. Enjoy the ride. We know power is nothing without control. EP8 delivers smooth, direct power to ensure you’re always in complete control while experiencing a natural ride feeling. Every ride is different. Every rider is unique. Your favorite trails change with the seasons. From dry, dusty days through to muddy, dirty rides. Sometimes you want to shred hard and fast. Occasionally it’s time to cruise. Shimano's E-Tube Project App gives you the power to customise your ride way before you buckle up your helmet. Choose from 10 levels of assist character, 5 levels of assist start or select and set the maximum amount of torque best suited to your ride style across 3 modes (Eco, Trail and/or Boost). Save your preferences as two different profiles and switch between them easily via your display. WTB STX i30 TCS Wheelset with Maxxis Minion Tyres Fully loaded for the demands of modern E-MTB trail riding, this electric mountain bike comes equipped with a set of WTB STX i30 TCS tubeless ready rims for a smoother and more controlled ride. GT has also kitted out this model with a Maxxis Minion DHF tyre on the front wheel and a Maxxis Minion DHR II tyre on the rear wheel for the perfect combination of low rolling resistance, increased stability on rough terrain and fewer chances of flats or punctures. Wherever your next mountain adventure takes you, the GT eForce Amp 29 E-Bike (2022) is ready. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Advanced Aero Road Bike Frame Vitus has done the testing and know that the EVO exhibits up to 45% less drag than the previous model. But that means nothing until you unleash it outside and feel it for yourself. In the world of aero bikes, amongst all the jargon and data, it’s easy to lose sight of what really matters. That to feel fast is to be fast, and you can’t feel fast in a wind tunnel. Fast Accelerating Carbon Fibre Frameset The pleasure of speed only exists in the real world. Out there on the road. The sensation of putting power through your pedals and feeling the bike surge underneath you. And the faster you go, the easier it becomes. That’s where the ZX-1 EVO excels. That’s the bike working with you as the road snakes and the wind changes. That’s aero. Aero Riding Position The performance geometry slots the rider into a naturally aerodynamic position, so whether racing flat-out, sprinting for road signs or charging on the front of the chaingang, the EVO gathers momentum quickly and holds speed with ease. Vitus has made this bike fast. They know it rides fast. The rest is up to you. Key Features: Race-Fit geometry SL UD Carbon aero frame and fork with integrated seat clamp Full internal cable routing SRAM Force eTap AXS HRD groupset Reynolds AR58/62 DB Carbon wheelset Vision Metron 5D ACR Carbon cockpit Features: Frame: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm axle, Flat Mount Fork: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Tapered Steerer, 100 x 12mm, Flat Mount, Size Specific Offset Headset: FSA/Vitus ACR, Sealed Bearings, 1.5" 36x45 degrees (FSA No.55ACR), Vitus/FSA Headset Cover Handlebar: Vision Metron 5D ACR Integrated Bar/Stem Combo, UD Carbon, XS:400mm S:400mm M:420mm L:420mm XL:420mm XXL:420mm Stem: Vision Metron 5D Acr Integrated Bar/Stem Combo, 125mm drop, - 6 degrees, XS:100mm, S:100mm, M:110mm, L:110mm, XL:120mm, XXL:120mm Grip(Tape): Vitus Super Grip, Anti Slip Wheelset: Reynolds AR58/AR62 DB Carbon Carbon Clincher Front Rim: Reynolds AR58, Carbon, TubelessReady, Disc Brake, Rim Depth: 58mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm, 24 spoke holes Rear Rim: Reynolds AR62, Carbon, TubelessReady, Disc Brake, Rim Depth: 62mm, Inner Rim Width: 21mm, Outer Rim Width: 30mm, 24 spoke holes Front Hub: Reynolds GW TR3, 100 x 12mm, Centre Lock Rear Hub: Reynolds GW TR3, 142 x 12mm, Centre Lock, XD-R Freehub Front Tyre: Michelin Power Cup Classic TS TLR, 700c x 25c, Tubeless Ready Rear Tyre: Michelin Power Cup Classic TS TLR, 700c x 25c, Tubeless Ready Spoke: Reynolds Sprint 2x Lacing, External Brass Nipples Chain: SRAM Force D1, 12 Speed Crankset: SRAM Force D1 DUB, 48/35T, XS:165mm S:170mm M:172.5mm L:172.5mm XL:175mm XXL: 175mm Bottom Bracket: SRAM DUB BB386, DUB for BB386EVO Front Brake: SRAM Force eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rear Brake: SRAM Force eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rotors: SRAM Paceline, Front:160mm, Rear:140mm Front Derailleur: SRAM Force eTap AXS, 2x12 Speed, Braze-On Rear Derailleur: SRAM Force eTap AXS, 12 Speed, Short Cage Left Shifter: SRAM Force eTap AXS, 2x12 Speed Right Shifter: SRAM Force eTap AXS, 12 Speed Freewheel: SRAM XG 1270 D1, 10-33T Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: ZX-1 EVO Aero, +20mm/-2mm Offset, XS/S: 300mm M/L: 350mm XL/XXL: 400mm Seat Screw: ZX-1 EVO Integrated, Internal Wedge System Weight: Medium: 8.4kg Technologies: Full Monocoque Frame: The ZX-1 EVO features a true monocoque frame, manufactured as a single piece. Comfort and performance go hand-in-hand, while eliminating any joins creates greater strength and results in a light weight, eye catching frame. Less aerodynamic drag, for ultimate speed when out on the open road Race-Fit Geometry: Race-Fit geometry is reserved for Vitus' performance led race bikes. The aim is to put the rider in the most advantageous position possible, maximising power output and aerodynamic positioning, whilst maintaining comfort Dual Fork Design: Vitus has introduced frame size specific fork geometry maintaining fit and handling characteristics across the full size curve. By adjusting the rake on the smaller sizes this ensures handling isn't compromised, whilst at the same time giving riders the same toe overlap versus the bigger frame sizes Tyre Clearance: Performance shouldn't come about at the expense of practicality, that's why the ZX-1 EVO brings 700c x 30 tyre clearance across all sizes. For added comfort and control, without compromising on speed
The Giga 297 Elite Carbon features a carbon frame and is equipped with superb components for an awesome performing bike at an affordable price. It also has a Shimano 12-Speed groupset, Fox Float suspension and rolls upon a mixed wheel standard with a 29" upfront and a 27.5" on the rear. Full Carbon Frame, Fox Suspension and Shimano Groupset This stylish and capable enduro bike features a full-carbon frameset that's armed with long-travel Fox Float 38 Performance Series suspension and a Shimano SLX M7100 12-Speed groupset with wide-ranging 10-51-tooth cassettes and SLX M7120 4-Pot hydraulic disc brakes. This all-terrain monster truck of a bike rolls upon Nukeproof Horizon V2 Boost wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres. The Giga 297 Elite brings speed, stability and traction to any off-road terrain, anywhere on Earth. Gluttony – Habitual Greed or Excess It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless. In its first year, the Giga frames have racked up numerous test wins and media awards, plus a whole heap of silverware at the races. Whatever the wheel size; the Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeon-hole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest. Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. Supportive, Controlled and Progressive Suspension Performance The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. The suspension platform is based on the same horseshoe driven linkage as Nukeproof’s award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity, so the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Robust and Lightweight Carbon Fibre Frameset The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. To ensure a perfectly dialled fit Nukeproof now offer the 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. The frame geometry is Long, Low, Slack and Steep as it is based around their saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Fox Performance Suspension and Shimano SLX 12-Speed Groupset Nukeproof’s Elite Range features suspension performance from the awesome Fox 38 Performance Fork and X2 performance rear shock. The drivetrain is from Shimano’s wide-ranging 10-51 SLX 12-Speed groupset. Stopping power is provided by Shimano’s SLX 4-Pot hydraulic disc brakes. The all-carbon frame rolls on Nukeproof’s award-winning Horizon V2 wheels wrapped in Maxxis Tubeless tyres, giving it top-class speed, stability and traction for all weather and terrain conditions. Water Bottle and Accessory Mounts and Integrated Rear Mudguard The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.5” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chainstay protection. The Nukeproof GIGA: Gluttony is not a sin. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Features: Frame: Nukeproof Giga 297 Carbon, 180mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Performance Elite Series, Grip 2 Damper, 180mm, 44mm Offset, BOOST, Black Shock: Fox Float X2, Performance Series, EVOL, 2 Position lever, Custom CM, RM, Rezi CM tune, 205x65mm, Trunnion with Bearing End, 1x 0.3 spacer fitted Front Wheel: Nukeproof Horizon V2, 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 27.5” x 2.4 WT, 3C MaxxTerra DD TR Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide, 28-36T, ISCG-05, Black Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 203mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Accessories: Nukeproof Carbon Water Bottle Cage Weight: 15.68kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 594mm Fork Offset: 44mm Rear Travel: 180mm Wheels Size: Front 29"/ Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 28% Shock Size: 205x65mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Giga 290 Elite is ideal for racing up steep, technical climbs and rocketing back down fast and daring descents, this Elite Giga full-suspension enduro bike is equipped with a Shimano 12-Speed groupset, hydraulic disc brakes and Fox Float suspension. Full Carbon Frame, 29" Wheels and Fox Performance Suspension This stylish and capable enduro bike features a full-carbon frameset that's armed with long-travel Fox Float 38 Performance Series suspension and a Shimano SLX M7100 12-Speed groupset with wide-ranging 10-51-tooth cassettes and SLX M7120 4-Pot hydraulic disc brakes. This all-terrain monster truck of a bike rolls upon Nukeproof Horizon V2 Boost wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres. The Giga 290 Elite offers speed, stability and traction that's ideal for conquering challenging enduro trails. Gluttony – Habitual Greed or Excess It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless. In its first year, the Giga frames have racked up numerous test wins and media awards, plus a whole heap of silverware at the races. Whatever the wheel size; the Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeon-hole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest. Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. Supportive, Controlled and Progressive Suspension Performance The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. The suspension platform is based on the same horseshoe driven linkage as Nukeproof’s award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity, so the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Robust and Lightweight Carbon Fibre Frameset The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. To ensure a perfectly dialled fit Nukeproof now offer 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. The frame geometry is Long, Low, Slack and Steep as it is based around their saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Fox Performance Suspension and Shimano SLX 12-Speed Groupset Nukeproof’s Elite Range features suspension performance from the awesome Fox 38 Performance Fork and X2 performance rear shock. The drivetrain is from Shimano’s wide-ranging 10-51 SLX 12-Speed groupset. Stopping power is provided by Shimano’s SLX 4-Pot hydraulic disc brakes. The all-carbon frame rolls on Nukeproof’s award-winning Horizon V2 wheels wrapped in Maxxis Tubeless tyres, giving it top-class speed, stability and traction for all weather and terrain conditions. Water Bottle and Accessory Mounts and Integrated Rear Mudguard The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.5” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chainstay protection. The Nukeproof GIGA: Gluttony is not a sin. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Features: Frame: Nukeproof Giga 290 Carbon, 170mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Performance Elite Series, Grip 2 Damper, 180mm, 44mm Offset, BOOST, Black Shock: Fox Float X2, Performance Series, EVOL, 2 Position lever, Custom LCM, LRM tune, 205x60mm, Trunnion with Bearing End Front Wheel: Nukeproof Horizon V2, 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2, 29", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29” x 2.4 WT, 3C MaxxTerra DD TR Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide, 28-36T, ISCG-05, Black Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 203mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal with Brand-X Remote lever, M:150mm drop; L:170mm drop; XL/XXL:200mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Accessories: Nukeproof Carbon Water Bottle Cage Weight: 15.92kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 594mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
From concept through to design, Kinematics, geometry and specification, the RS model is designed from the ground up to be the ultimate aggressive trail bike. It's the hooligan option in the Reactor range, with a host of upgrades to make it burlier than the rest. It features a RockShox Lyrik Ultimate RC2 forks (150mm) up front, a RockShox Super Deluxe Ultimate RCT rear shock and Nukeproof's award-winning carbon handlebars. There's also 4 Pot SRAM Code RSC disc brakes (with sintered pads), a SRAM ASX Eagle 12-Speed wireless drivetrain with Carbon X1 Cranks and DT Swiss XM1700 Spline 30 wheelset. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Fork: RockShox Lyrik Ultimate Charger 2.1 RC2 150mm, 42mm Offset, BOOST, Debonair, Gloss Red Rear Shock: RockShox Super Deluxe Ultimate RCT, Custom 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted. Front Wheel: DT Swiss XM1700 Spline 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss XM1700 Spline 30, 29", 6 Bolt, XD Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR Crankset: SRAM X1 Carbon Eagle 12-Speed, 170mm, 30T, B148, DUB Shifter: SRAM AXS Eagle 12-Speed, Red Rear Derailleur: SRAM AXS X01 Eagle 12-Speed, Red Chain: SRAM GX Eagle 12-Speed Cassette: SRAM XO1 Eagle 12-Speed, CS XG1295 EAGLE 10-52T Brakes: SRAM Code RSC Sintered Pads Front Rotor: SRAM Centreline, 200mm Rear Rotor: SRAM Centreline, 180mm Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Revive Stealth with Triggy Long Lever; M:160mm drop; L:185mm drop; XL:213mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.86Kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 561mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.