The Colnago G3X is Colnago’s take on the ever-growing Gravel trend. It's purposefully built for both Gravel and Long Distance Road riding and features geometry that's especially focused for Gravel, with longer chainstays, a lower BB and longer top tube. This brings the rider forward and ensures a more compact rider position with a lower centre of gravity for greater off-road balance and control. Shimano RX810 Gravel Specific Groupset with Hydraulic Disc Brakes Plus, the G3X is equipped with Shimano’s latest Gravel specific groupset (Shimano RX810 Mechanical) and gravel-specific tyres from Hutchinson at 700x40c to match the Frame’s enormous Tyre Clearances. And, the frame accepts up to 700x42 or 650bx47 sized tyres. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Sommet 29 CRX is a top-level enduro race bike that features Kashima coated Fox Float Factory Series suspension and a Shimano XT 1x12-Speed groupset. This bike glides over rough terrain and finds traction and control in weather conditions, while smoothly shifting across its gear range and ensuring exceptional stopping power. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II race tyres. Fast and Aggressive All-Terrain Race Mountain Bike The big-hitting Vitus Sommet CRX 29 Mountain Bike is all about the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Agile, Durable and Stable Enduro Race Bike The Sommet is a bike that you sit within, not perch on top. It’s a powerful rider position and together you are a team. Eagerly shred the refined berms and manicured obstacles of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of natural features and steep, technical ground. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Whether threading the needle through Enduro tape or dropping into your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and turbulent trails. Bringing calm where all around there is frenzy. Key Features: Big-hitting enduro bike with modern geometry Fox 38 and Float X2 Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT 4 piston hydraulic disc brakes Nukeproof Horizon V2 tubeless-ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Fork: Fox 38 Float EVOL Factory Series 29", 170mm travel, Kashima coating, Grip2 damper, 38mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper & ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9 degree Back Sweep, 31.8mm Clamp Diameter, S & M: 780mm Wide, L & XL: 800mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5 degree Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29" Front and Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front & 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 29" x 2.4" WT, 3C MaxxTerra compound, DD casing Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT76 or Brakco DR-02, 203mm Front & Rear, 6 Bolt Hub Fitment R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L & XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.6kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 297 CRX features a carbon/alloy frame adorned with 170mm-travel Kashima-coated Fox Float Factory suspension and a 12-Speed Shimano XT M8100 wide-range groupset. It rolls upon a mixed-wheel platform (29" front, 27.5" rear) that offers a sublime balance of rolling efficiency, stability and control for riding all-terrains. Vitus has also fitted it with 4-piston Shimano XT hydraulic disc brakes to control your momentum with dependable stopping power. And it rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II tyres. Full-Carbon Frame and Mixed-Wheel Platform Enduro Race Bike The big-hitting Vitus Sommet CRX 297 Mountain Bike is all about the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Fox Factory Suspension and Shimano XT 12-Speed Groupset The Sommet 297 CRX has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance over the back for steep ground and is responsive through tight corners, while a stable 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. Plus, it’s easier to pull manuals and wheelies. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Agile, Powerful and Versatile Long-Travel Suspension Bike The Sommet is a bike that you sit within, not perch on top. Eagerly shred the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through Enduro tape or dropping in on your favourite descent, speed comes easily to the Sommet CRX. It thrives in the chaos of turbulent trails. Bringing calm where all around there is frenzy. Key Features: Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Big-hitting enduro bike with modern geometry Fox 38 and Float X2 Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT 4 piston hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Fork: Fox 38 Float EVOL Factory Series 29", 170mm travel, Kashima coating, Grip2 damper, 38mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29" Front, 27.5" Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxTerra compound, DD casing Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT76 or Brakco DR-02, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.5kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
DT Swiss Rims and Maxxis Tyres Terrain-smoothing suspension and an efficient groupset aren’t the only standout features on this hard hitting full suspension ride. It also boasts 29"/27.5" DT Swiss E532/Formula boost wheels that are wrapped in the fast rolling and high grip Maxxis Assegai and DHR II tyres. This stylish full suspension enduro race bike is ideal for off-piste all-mountain exploring, alpine freeride routes and the rigours of long-distance enduro race events. Mullet Wheel Standard - 29" Front Wheel and 27.5" Rear Wheel Commencal has been working on 29/27 ‘Mullet’ bikes and frames for many years now with their different downhill (DH) teams. This work has allowed Commencal to understand that to transform a regular bike with the same sized wheels into a bike with different sized wheels, it isn’t effective to just throw a 27-inch wheel on the back. The geometry and kinematics of the bike must be completely reworked, and it is thanks to this experience that we are now able to present the most successful version of the META V4 they've ever produced, the Meta SX. Equipping this Meta SX with different sized 29/27-inch wheels is not the result of a trend that Commencal is following. Quite simply, this way the bike is much more balanced, specifically relating to grip on the front and back - the large 29-inch wheel on the front allows more confidence and rolling capacity whilst the 27.5-inch rear wheel offers more manoeuvrability and responsiveness. The result is a bike that is more agile and easier on the steeps, more efficient under braking and more dynamic when pushing hard. Once again, Commencal's choice to work with Aluminium has allowed them to accompany this change in wheel size with an adjustment of the geometry. A shorter 10mm reach, a straightened steerer angle and extended (10mm) chainstays mean that the rider is naturally repositioned in the centre of the bike and will therefore be more precise and agile in their technique. Lively, Progressive and Stable Enduro Optimised Suspension Undoubtedly, one of the points that have changed the most is the way the suspension works. Apart from the kinematics, which have been reworked to provide more liveliness, Commencal made a point of managing the stiffness of the rear triangle. Through new double row Enduro Bearings, eliminating any deformation, the Meta SX frame offers perfect deformation/rigidity management to provide grip, comfort, and performance. Easy Adjustable Flip Chip Suspension System In addition to all this in-depth work, as on their Meta Power TR and Meta TR models, Commencal now offers a "Flip Chip" on the shock extension in order to be able to better adjust the geometry, and therefore fit with your style. This system also means you can adapt the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on your preferences, you can have the choice between a dynamic bike that’s perfect for big pedalling trips, or a more progressive version that is ideal for days in the bike park or on more committed trails. Stylish Welds and Convenient Cable Routing The welds have been the subject of meticulous work to reduce them as much as possible without affecting the solidity of the frame. The cable routing is neat for easier maintenance, the cables being easily accessible in the down tube, while grommets are placed at the ends to give perfect support and prevent penetration of water and mud. Installing a bottle cage has also been made easy. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Ruut Ti provides exceptional stability, comfort and poise for loose terrains, fast trails and long days in the saddle, the Ruut Ti is ideal for exploring, racing and touring. It is fitted with a Shimano GRX 1x11-Speed groupset that features a wide-ranging 10-42-tooth cassette for smooth and efficient gear shifting and powerful hydraulic disc brakes. Versatile, Dependable and Stylish Gravel Bike The Ruut range was born from the need to have a versatile bike. One that would be comfortable enough for backpacking and long-distance riding, but at the same time would retain a clearly sporty character. At Rondo, they are all competitive riders - they ride fast, they race - but they don't need a bike for the Cyclocross (CX) World's. What they want from a drop-bar bike is to be able to go long, and go fast, especially on rough roads. So, after over two years of development, Rondo came up with a tool that is the ultimate solution for real-world riders. The RUUT TI is one of Rondo's most aggressive off-road bikes, designed for real-world riders and proper racing fun. Made with a titanium frame that is built to withstand steep descents and gnarly trails. The Spank Wing 12 Vibrocore handlebars feature a comfortable flat top filled with foam to absorb impact on uneven surfaces. New X-Wide HUNT gravel wheels with straight pull spokes and extra-wide 25mm internal rims ensure superior grip and better stability. And it also looks fantastic. Rondo X Hunt Wheels and Vittoria Terreno Tyres Engineered and equipped for riding off-road trail and gravel tracks, this ride rolls upon Rondo X Hunt wheels wrapped in Vittoria Terreno tyres. This wheel/tyre combo gives fast-rolling and confidence-inspiring grip across all terrains. Plus, these wheels are held in place by stiff and reliable 12mm thru-axles and a quality Rondo finishing kit provides top-level comfort and style for wherever you ride. Twin-Tip Fork Technology for Easy-Adjust Geometry In a world-first design for drop bar bikes, the Ruut Ti features Rondo’s “TwinTip” forks, which enable the rider to change the geometry to suit the terrain/riding type. This is thanks to their adjustable dropouts, which can be set in the “HI” setting for steeper angles for a low and aggressive road bike feel, or the “LO” setting for a slightly longer wheelbase and slacker angles, making it ideal for endurance or off-road adventure riding. Thanks to the unique TwinTip fork you can change your position and adjust the steering character of the bike. The first setting, with steeper angles, a smaller trail and a lower riding position will be the choice for racing and dynamic, sporty riding on smooth roads. The alternative fork setting gives the bike slacker angles, a longer trail and a bit more relaxed riding position, perfect for long-distance adventure riding and endurance training. It also gives the rider a lot of confidence in challenging off-road terrain, especially on fast, steep downhills. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Auro Disc TT features a full-carbon frame with full-internal cable routing, wide-tyre clearance up to 28c and is equipped with a SRAM Rival eTap AXS electronic 2x12-Speed groupset. This wireless groupset shifts quickly and smoothly throughout its gear range and its hydraulic disc brakes control your momentum with outstanding accuracy in all-weather conditions. This bike also rolls upon carbon Tubeless Ready Reynolds AR58/AR80 aerodynamic race wheels wrapped in ultra-efficient, high-grip Michelin Power Road TLR tyres. Full-Carbon Time Trial and Triathlon Race Bike In time-trial and triathlon, you sweat the small details. You tweak, refine and obsess about the finer points and the things that others don’t see. The things that will save seconds out on the road or save the legs for when you stride out of transition. Aerodynamic Disc Brake Road Race Bike The Vitus Auro Disc is a complete aero system, optimised throughout to maximise efficiency without compromising comfort. And yet we’ve gone further, beyond the road, to create a platform that facilitates life in and out of a bike box, travel, simplified servicing and quick assembly. The complete package. Reynolds AR62/80 Carbon Tubeless Ready Wheels By using hydraulic disc brakes, the frame is able to accommodate a wider tyre, up to 28mm, a crucial detail that reduces drag by enhancing airflow between the carbon wheelset (Reynolds AR62/80, no less) and frame. This capability, to run a larger volume tyre, also has the knock-on benefit of reducing stress on the body by improving comfort - a performance-determining detail that becomes more prominent as time on the bike increases. The headset sits flush with the top tube, reducing the frontal area and creating a clean line from the cockpit to the carbon seatpost. Even the seatclamp is adjusted via an internal wedge system, again ensuring that no unnecessary details are left out in the wind. Adjustable TT Cockpit and Saddle Setup Adjustability is paramount on a TT bike so the combination of Zipp’s renowned Vuka cockpit and the Vitus TT-specific saddle allows for a huge amount of customisation to fine-tune your setup. When the time comes to travel for your next big race, Vitus has made life simple and stress-free. Thanks to lower stem guides, the cables can be isolated for easy removal of the handlebars. And because the bike uses SRAM’s latest wireless RIVAL eTap AXS groupset, you can also remove and safely stow the front and rear derailleurs to reduce the risk of damage in transit. The small things add up. They all work together to make the Vitus Auro a TT or triathlon bike that’s tuned for performance. Because in these disciplines, every little detail makes a difference. Key Features: Carbon TT Platform: Aero Race Performance Frame Material: UD Carbon Wheel Size: 700c Cockpit: Zipp Vuka cockpit Intended Use: Road - Time Trial TT and Triathlon disc brake frameset Up to 28mm tyre clearance Full internal cable routing SRAM RIVAL eTap AXS HRD 2x12 speed groupset Reynolds AR62/80 DB carbon wheelset Zipp Vuka cockpit Features: Frame: Auro Disc Carbon, UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm Axle Spacing, Flat Mount, Axle Specifications: 172mm Length, 14mm Thread Length, M12xP1.5 Thread Pitch Fork: Auro Disc Carbon, UD Carbon, UCI Approved, Tapered Steerer, 100 x 12mm, Flat Mount, Size Specific Headset: FSA, No.42/ACB 1-1/8" Handlebar: Zipp Vuka Alumina, Aluminium, 400mm Stem: Auro Disc Carbon, UD Carbon, S:85mm M:85mm L:105mm XL:105mm Grips: Vitus TriGrip, Anti Slip Wheelset: Reynolds AR58/AR80 DB Carbon Carbon Clincher Wheelset, 700c, Tubeless Ready, 100 x 12mm Front, 142 x 12mm Rear, Centre Lock, XD-R Freehub F/rim: Reynolds AR58, Carbon, TubelessReady, Disc Brake, 20 Hole, Rim Depth: 58mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm R/rim: Reynolds AR80, Carbon, TubelessReady, Disc Brake, 24 Hole, Rim Depth: 80mm, Inner Rim Width: 19mm, Outer Rim Width: 29.5mm F/hub: Reynolds, 100 x 12mm, Centre Lock R/hub: Reynolds, 142 x 12mm, Centre Lock, XD-R Freehub F/tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready R/tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Chain: SRAM Rival D1, 12 Speed Crankset: SRAM Rival D1 DUB, 48/35T, S:170mm M:172.5mm L:172.5mm XL:175mm Bottom Bracket: SRAM DUB press-fit BB86 F/brake Set: SRAM S-900 Aero HRD, Hydraulic Disc, Flat Mount R/brake Set: SRAM S-900 Aero HRD, Hydraulic Disc, Flat Mount Rotors: SRAM Paceline, Front:160mm, Rear:140mm F/derailleur: SRAM Rival eTap AXS, 2 x 12 Speed, Braze-On R/derailleur: SRAM Rival eTap AXS, 12 Speed, Short Cage L/shifter: SRAM eTap AXS CLICS, 2 x 12 Speed R/shifter: SRAM eTap AXS CLICS, 12 Speed Freewheel: SRAM XG 1270 D1, 10-33T Saddle: Vitus TT, CRN-Ti Rail, Pressure Relief Channel Seat Post: Auro Disc Carbon, UD Carbon, 400mm Seat Screw: Auro Integrated, Internal Wedge System Weight: Medium: 9.6kg Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 36 Float, Performance Elite Series, Grip 2 Damper, 160mm, 44mm Offset, BOOST, Black • Shock: Fox Float X, Performance Elite Series, 2 Position, LV EVOL, Custom CM+, RM, Rezi LM, 210x55mm, Bearing End, 1x 0.3 spacer fitted. • Front Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, 110x15mm • Rear Wheel: Nukeproof Horizon V2 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Assegai 27.5x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5x2.4" WT 3C MaxxTerra/EXO+/TR • Crankset: Shimano SLX M7100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline • Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus • Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink • Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads • Front Rotor: Brakco, 203mm • Rear Rotor: Brakco, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Brand-X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm Axle to Crown: 549mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The E-Sommet 297 VR features a modern-geometry alloy frame equipped with RockShox Domain forks and Super Deluxe rear shock that offers a sublime balance of high-speed control and traction in all weather conditions. Vitus has fitted it with a Shimano STEPS E7000 electronic pedal-assisted motor drive that gives you an extra push on steep climbs while a Shimano Deore M5100 11-Speed groupset and powerful 4-piston hydraulic disc brakes give you a wide-gear range and dependable stopping power. This bike also features a mixed-wheel platform (29" front / 27.5" rear) to ensure you experience fast all-terrain performance. It rolls upon Tubeless Ready WTB ST Light i30 rims wrapped in high-grip Maxxis Assegai Wide Trail (WT) and High Roller II 3C MaxxTerra tyres. And it’s fitted with a Brand-X Ascend dropper seatpost and a stylish Nukeproof Horizon finishing kit. Full Suspension Alloy Frame Enduro Race E-Bike The Vitus E-Sommet VR Mountain Bike has all the trail-shredding performance and longer travel of a big-hitting 170mm Enduro bike, with a Shimano motor under the hood that kills the climbs and extends access to the most technical tracks. Experience the rush - the brief snapshots that flood your senses and place you deep in the zone. The feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last run. The rush that pushes you to explore your limits without overstepping the mark. Miss the last uplift? Doesn’t matter. The proven E7000 drive unit will soon have you back at the trailhead. 'Mullet' Mixed-Wheel Platform and Shimano STEPS Motor Drive Developed to run a mullet wheel setup, the E-Sommet VR features a 27.5” rear wheel that gives you more clearance for steep ground and is more responsive through tight corners, while a 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. The stability of the full aluminium frame with a seamlessly integrated battery is rock solid, so you won’t be taking just any line, this is a bike for taking the best line. This is a bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. The powerful STEPS system, with an E8035 504wh internal battery, keeps you fresh on the climbs so you can go all-in on the descents. Agile, Powerful and Versatile Full-Suspension E-Bike The E-Sommet VR is a bike that you sit within, not perch on top. It’s a powerful rider position that puts you firmly in control. Eagerly build your confidence on the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through the challenging terrain of your favourite forest trails or dropping in on the lively descents of an e-Enduro, speed and traction come easily to the e-Sommet. It thrives in the chaos of steep and challenging trails. Bringing calm where all around there is frenzy. Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Key Features: E-Sommet Electric Enduro Platform: Internal battery frame design with new Shimano EP800 drive unit, improved suspension kinematics and updated geometry Frame Material: 6061-T6 Aluminium Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 167mm Rear Intended Use: Enduro RockShox Domain R and Super Deluxe Select R suspension Efficient Shimano STEPS E7000 motor with 504Wh battery Shimano Deore 1x11 speed drivetrain Powerful Shimano 4 piston hydraulic disc brakes or SRAM DB8 hydraulic disc WTB ST Light i30 Tubeless Ready rims with tape applied Confidence-inspiring Maxxis Assegai and High Roller II tyres Features: Frame: E-Sommet 6061-T6 Double Butted Alloy, Internal cable routing, post mount disc brake mounts, Boost hub spacing - 148mm x 12mm thru-axle, Shimano STEPS compatible. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select R, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Domain R 29", 170mm travel, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-589, ZS56/28.6 upper and ZS66/40 lower to suit 1-1/8" upper tapered to 1.8" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, 12mm Rise, L and XL: 800mm Wide, 25mm Rise Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: WTB ST Light i30 rims on Vitus KT hubs, 29" Front, 27.5" Rear Wheelset, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: WTB ST Light i30 TCS 2.0, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: WTB ST Light i30 TCS 2.0, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Neutron, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Neutron, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.5" WT, 3C MaxxGrip compound, DD casing R/tyre: Maxxis High Roller II, 27.5" x 2.5" WT, 3C MaxxTerra compound, DD casing Chain: KMC e11S, 11 Speed, E-Bike specific, 118 Links Crankset: Shimano E8000 or E*Thirteen E*Spec Plus, 34T Narrow Wide Chainring, 165mm Crank Length, 53mm Chain Line F/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc R/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc Brake Rotors: Shimano RT66 or SRAM CenterLine - Shimano: 203mm Front & Rear, SRAM: 200mm Front & Rear, 6 Bolt Hub Fitment R/derailleur: Shimano Deore M5100, 11 Speed, Shadow Plus, Long Cage R/shifter: Shimano Deore M5100, 11 Speed, Rapidfire Plus Freewheel: Sunrace CSMS7, 11 Speed, 11-51T Range Saddle: Nukeproof Trail Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 34.9mm Diameter Battery: Shimano E8035, 504Wh, Downtube Integrated Cycle Computer: Shimano E7000, Boost, Trail, Eco, Off and Walk modes Assist Switch: Shimano E7000, Mounted on left Drive Unit: Shimano STEPS E7000, Max Power Output 250W, Max Torque 60Nm Weight: Medium: 24.3kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Escarpe 29 CRX features an elegant full-carbon frame that's adorned with Fox Float Factory Kashima-coated suspension front and rear, giving you a buttery-smooth ride with exceptional agility, control and traction. It's armed with a smooth-shifting Shimano XT M8100 12-Speed groupset that includes a Shimano XT chainset, a 10-51 Tooth wide-range cassette and powerful XT hydraulic disc brakes. It also rolls upon a Tubeless Ready Nukeproof Horizon V2 wheelset wrapped in Tubeless Ready 3C MaxxTerra compound Maxxis tyres. This full-suspension race bike offers outstanding composure and prowess in all-weather and all-terrain conditions, making it the ideal journey companion or race-day partner for riding anywhere on Earth. Strong and Lightweight Full-Suspension Trail Bike Dappled forest light on warm dusty trails. The soundtrack of tyres rushing through berms, nimbly threading a rock garden and the buzz of a happy freewheel. Eyes trained on the way ahead. You’re focused, but it’s easy. On the full-carbon Vitus Escarpe 29 CRX, there are no distractions. All trust and total control. But life isn’t a photoshoot, so let’s get real here. Swap in off-camber, hectic off-piste and washed-out turns, slick roots and “that climb” back to the trailhead. It doesn’t matter. The Escarpe is poised and planted - perfectly balanced to flow with you no matter where the trail goes. You and the bike are singing from the same hymn sheet. You want a bike that inspires confidence on technical descents and keeps you grinning for more, not gritting your teeth. You want a bike that holds speed and drives keenly into the climbs, keeping your legs fresh for one more run. You want to keep the weight down and the performance high. This is it. Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. Flip-Chip Adjustable Suspension Platform The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Vitus has ensured that geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. When riding trails there’s enough to think about without having to consider how the bike is going to respond to the next turn or obstacle. You should just know. It should do what you need it to. No backchat and no fight. On the Escarpe you don’t have to compensate or compromise. You don’t have to adjust your style. Just ride. Just concentrate on having fun. Key Features: Full T800 frame sheds weight for a truly responsive ride Fox 36 and Float DPS Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Dissector tyres Suspension Travel: 150mm Front, 140mm Rear Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, Grip2 air spring, EVOL, 3 position lever, 205mm x 60mm, trunnion Fork: Fox 36 Float Factory Series 29"", 150mm travel, Kashima coating, GRIP2 damper, 36mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8"" upper tapered to 1.5"" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 760mm Wide, L and XL: 780mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grip(Tape): Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29", 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready Front Rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Rear Rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Front Hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm Rear Hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm Front Tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxTerra compound, EXO casing Rear Tyre: Maxxis Dissector, 29" x 2.4" WT, 3C MaxxTerra compound, EXO+ casing Spoke: Stainless Steel, Double Butted Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 30T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT M8120, Lever: BL-M8100, Caliper: BR-M8120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT M8100, Lever: BL-M8100, Caliper: BR-M8100, Post Mount, Two Piston Caliper Rotors: Shimano RT76, 203mm Front, 180mm Rear, 6 Bolt Hub Fitment Rear Derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage Right Shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Neutron Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 14kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Built for speed, this road bike was created to be ridden fast with a fully custom ST carbon layup and a Shimano 105 Di2 electronic groupset. From front to back, Orro has ensured that its tube profiles cut through the air as effectively as possible, helped by a super clean front end and reduced gap between tyres and frame. With a super stiff bottom bracket and downtube, the Venturi STC transmits watts onto the road efficiently to eat up miles as fast as you're able. Getting you into the best position out on the road, this model comes complete with size-specific components, the brand's bespoke STC carbon fibre layup, and clearance for 28c tyres. The Venturi STC is an evolution of the much-loved speed machine. Orro knew nothing had to be revolutionised with this bike so have kept the geometry and handling that makes the Venturi so easy to ride and updated the frame and cockpit to make it even better. It now has a fully integrated cockpit on every model for improved front-end aero performance and a clean look. The Venturi is an aerodynamically optimised frame that rewards you with brilliant speed. This is a bike that encourages you to ride fast but lets you cruise in comfort when you want to calm things down. The Prologo, FSA and Shimano kit ensure every contact point is a joy to use throughout your ride. Integrated Cockpit The next generation of the Venturi STC has fully integrated cables through the bar and stem on every model. This has enhanced aerodynamic performance by reducing drag coefficient while emphasizing the clean lines and frame finish. Orro's integrated design is flexible so you can upgrade easily at a later date, or change to a completely different bar and stem set up depending on your needs. This model features frame size-specific FSA ACR aluminium cockpit components. Shimano 105 Di2 Groupset Shimano 105, the world’s most popular groupset, has gone electric with Shimano’s Di2 tech. Shimano 105 has long been praised for its affordability and performance and the Di2 version is no different, bringing the speed and accuracy of electronic shifting to even more riders. It comes specified with a 50-34t compact chainset and 11-34t 12-speed cassette for flexibility both ascending and descending. Hydraulic disc brakes ensure power and control are always at your fingertips. Venturi STC If you like a fast bike with razor-sharp handling and a high degree of comfort then this is the bike for you. The headtube has also been modified to over-sized 1” ½ bearings top and bottom for added stiffness and to help facilitate the fully internal cables. All the key features from Orro's first design remain; aero tubing with a fully custom ST Carbon layup for low weight and a high stiffness, 28c tyre optimisation for added comfort and decreased rolling resistance and flat mount disc brakes for serious stopping power. Speed and Comfort Optimising the Venturi for 28C tyres allows the rider to reap the benefits of wider tyres on a road bike. Some of these include the allowance of lower tyre pressure, running lower PSI improves comfort. Two other major factors are improved grip and decreased rolling resistance. If you, the rider is more comfortable then you can ride faster, for longer. Using 28c tyres has allowed Orro to reduce the space between the tyres and the frame smoothing airflow over the frame instead of creating turbulent air behind the tyre. Custom Carbon Layup Orro has extensively tested different carbon layups to make sure they have the best combination of speed and comfort on the Venturi. 3 different layups were designed and made into frames, then tested back to back. It's this time and effort that make sure the Venturi is as fast as possible, all the time. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The ZX-1 EVO CRS Road Bike (Ultegra features a high-quality carbon frameset and is equipped with a Shimano Ultegra R8000 11-Speed mechanical groupset and hydraulic disc brakes. Ideal for fast road races, steep climbing events and long-distance Grand Tour-style outings, the ZX-1 EVO CRS is optimised to perform at the highest level in all race conditions. Lightweight, Strong and Stiff Road Race Bike The latest Vitus ZX-1 has been remastered, reimagined and reengineered. Enter, the EVO. Lighter, stiffer and faster. Stripped right back to the drawing board for a ground-up overhaul. Agile, Aerodynamic and Efficient Carbon Aero Frameset Vitus has done the testing and knows that the ZX-1 EVO exhibits up to 45% less drag than the previous model. But that means nothing until you unleash it outside and feel it for yourself. In the world of aero bikes, amongst all the jargon and data, it’s easy to lose sight of what really matters. That to feel fast is to be fast, and you can’t feel fast in a wind tunnel. The pleasure of speed only exists in the real world. Out there on the road. The sensation of putting power through your pedals and feeling the bike surge underneath you. And the faster you go, the easier it becomes. That’s where the ZX-1 EVO excels. That’s the bike working with you as the road snakes and the wind changes. That’s aero. Shimano Ultegra R8000 11-Speed Mechanical Groupset The ZX-1 EVO doesn’t neglect everything for the sake of speed, since an uncomfortable rider cannot be fast and efficient. At least, not for long. Thanks to the one-piece carbon monocoque frame there are no points of weakness, no joints, so it is specifically engineered to be stiff where required and deliver comfort elsewhere, reducing harshness from the road for a more soothing ride feel. Reassuringly, there are no compromises on performance with the build. You’re getting trusted performance from Shimano’s Ultegra groupset, deep-section aero Reynolds carbon wheels and an integrated carbon stem and handlebar to keep the front end sleek. The result? A bike with a stunningly clean aesthetic that carves through the air with outstanding efficiency. The performance geometry slots the rider into a naturally aerodynamic position, so whether racing flat-out, sprinting for road signs or charging on the front of the peloton, the EVO gathers momentum quickly and holds speed with ease. Vitus has made this bike fast. They know it rides fast. The rest is up to you. Features: Frame: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm axle, Flat Mount Fork: ZX-1 EVO Carbon, SL UD Carbon, UCI Approved, Tapered Steerer, 100 x 12mm, Flat Mount, Size Specific Offset Headset: FSA/Vitus ACR, Sealed Bearings, 1.5"" 36x45 degrees (FSA No.55ACR), Vitus/FSA Headset Cover Handlebar: Prime Primavera Carbon Aero, UD Carbon, Rise: 78mm, XS:400mm S:400mm M:420mm L:420mm XL:420mm XXL:420mm Stem: FSA ST-OS-185 Integrated, Bar Bore 31.8mm, - 6 degrees, XS:100mm, S:100mm, M:110mm, L:110mm, XL:120mm, XXL:120mm Grip(Tape): Vitus Super Grip, Anti Slip Wheelset: Reynolds AR58/AR62 DB Carbon Clincher Wheelset, 700c, Tubeless Ready, 24 Hole, 100 x 12mm Front, 142 x 12mm Rear, Centre Lock, HG Freehub Front Rim: Reynolds AR58, Carbon, Tubeless Ready, Disc Brake, Rim Depth: 58mm, Inner Rim Width: 19mm, Outer Rim Width: 28mm Rear Rim: Reynolds AR62 , Carbon, Tubeless Ready, Disc Brake, Rim Depth: 62mm, Inner Rim Width: 21mm, Outer Rim Width: 30mm Front Hub: Reynolds GW TR3, 100 x 12mm, Centre Lock Rear Hub: Reynolds GW TR3, 142 x 12mm, Centre Lock, HG Freehub Front Tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Rear Tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Spoke: Reynolds Sprint 2x Lacing, External Brass Nipples Chain: KMC X11, 11 Speed Crankset: Shimano Ultegra R8000, FC-R8000, 52/36T, XS:165mm S:170mm M:172.5mm L:172.5mm XL:175mm XXL: 175mm Bottom Bracket: TRiPEAK 386-24, BB 386EVO for 24mm axle Front Brake: Shimano Ultegra R8000 Disc, BR-R8070, Hydraulic Disc, Flat Mount Rear Brake: Shimano Ultegra R8000 Disc, BR-R8070, Hydraulic Disc, Flat Mount Rotors: Shimano MT800, Front:160mm, Rear:140mm Front Derailleur: Shimano Ultegra R8000, FD-R8000-F Rear Derailleur: Shimano Ultegra R8000, RD-R8000-GS, 11-Speed, Long Cage, Shadow Left Shifter: Shimano Ultegra R8000, ST-R8020 Right Shifter: Shimano Ultegra R8000, ST-R8020, 11-Speed Freewheel: Shimano Ultegra R8000, 11-32T Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: ZX-1 EVO Aero, +20mm/-2mm Offset, XS/S: 300mm M/L: 350mm XL/XXL: 400mm Seat Screw: ZX-1 EVO Integrated, Internal Wedge System Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Vitesse EVO CRS eTap Force features an ultra-strong, stiff and lightweight full-carbon frameset that's suited to Grand Tour-style events, high-adrenaline group races and fast-paced Sportives. Vitus has kitted it out with a SRAM Force eTap AXS 12-Speed groupset that incorporates modern wireless technology for outstanding electronic gear shifting performance. This groupset also features SRAM's Force D1 hydraulic disc brakes that offer superb braking power in all weather conditions. This fantastic road race bike rolls upon tubeless-ready Reynolds AR29 carbon wheels wrapped in Michelin Power Road TLR Tubeless Ready tyres. And the finishing kit includes a Prime Primavera Carbon handlebar and seatpost. SRAM Force eTap AXS Wireless Electronic Groupset The Vitus Vitesse EVO CRS, with SRAM Force eTap AXS components, is a lightweight racing road bike. But this isn’t just a bike for the rising road, because what goes up must come down. Sharp on the climbs, but also agile on descents and capable of holding speed on the flat. To be a great all-around road bike, to win a Grand Tour even, it has to perform everywhere. One-Piece Full-Carbon Road Bike Race Frame The Vitesse has been on a redesign journey, and this new EVO features the latest one-piece carbon frame construction from Vitus. Not only does it look sleek and stylish, but the seamless design also has no joins and there is no extra material being used to bond the frame together. This carbon frame is ultra-stiff, strong and lightweight. From the first pedal rotation, you will realise that the Vitesse EVO will greatly benefit your road riding experience. Stable and Efficient Race Optimised Geometry The EVO geometry is optimised to give you control through turns while also being responsive to bursts of acceleration and offering outstanding efficiency on steep climbs. Stiffness is engineered into the frame where you need it most, so precious energy won’t be wasted - something every road cyclist appreciates. It also features modern frame clearance that provides space for wider, larger volume tyres. Wider tyres help to smooth out rough and unstable road surfaces, roll faster and ensure more grip in all riding conditions. Fast, Agile and Responsive Road Race Bike The Vitesse EVO is a masterful climber. When you dream of dancing on the pedals, floating up legendary climbs and scorching personal bests, this is the bike you do it on. And when you roll over the top and hit the descent, this bike inspires confidence and lets you relax as you race the perfect route to the bottom. Features: Frame: Vitesse EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, 12mm x 142mm axle, Flat Mount Fork: Vitesse EVO Carbon, SL UD Carbon, UCI Approved, Tapered Steerer, 100 x 12mm, Flat Mount, Size Specific Offset Headset: ACROS Aix-Low R3, Sealed Bearings, OD46, 1 1/8” – 1 ½”, 41.8 / 28.6 – 52 / 40 Handlebar: Prime Primavera Carbon Aero, UD Carbon, Rise: 78mm, XS:380mm S:400mm M:420mm L:420mm XL:440mm XXL:440mm Stem: Prime Doyenne Lightweight Aluminium, Bar Bore 31.8mm, +/- 5 degrees, XS:90mm S:100mm M:110mm L:110mm XL:120mm XXL:120mm Grip(Tape): Vitus Super Grip, Anti Slip Wheelset: Reynolds AR29 DB Carbon Carbon Clincher Wheelset, 700c, Tubeless Ready, 100 x 12mm Front, 142 x 12mm Rear, Centre Lock, HG Freehub Front Rim: Reynolds AR29, Carbon, TubelessReady, Disc Brake, 20 Hole, Rim Depth: 29mm, Inner Rim Width: 19mm, Outer Rim Width: 27mm Rear Rim: Reynolds AR29, Carbon, TubelessReady, Disc Brake, 24 Hole, Rim Depth: 29mm, Inner Rim Width: 19mm, Outer Rim Width: 27mm Front Hub: Reynolds GW RRB, 100 x 12mm, Centre Lock Rear Hub: Reynolds GW RRB, 142 x 12mm, Centre Lock, HG Freehub Front Tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Rear Tyre: Michelin Power Road TLR, 700c x 25c, Tubeless Ready Spoke: Reynolds, External Brass Nipples Chain: SRAM Force D1, 12 Speed Crankset: SRAM Force D1 DUB, 48/35T, XS:165mm S:170mm M:172.5mm L:172.5mm XL:175mm XXL: 175mm Bottom Bracket: SRAM DUB BB386, DUB for BB386EVO Front Brake: SRAM Force eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rear Brake: SRAM Force eTap AXS D1 Disc, Hydraulic Disc, Flat Mount Rotors: SRAM Paceline, Front:160mm, Rear:140mm Front Derailleur: SRAM Force eTap AXS, 2x12 Speed, Braze-On Rear Derailleur: SRAM Force eTap AXS, 12 Speed, Short Cage Left Shifter: SRAM Force eTap AXS, 2x12 Speed Right Shifter: SRAM Force eTap AXS, 12 Speed Freewheel: SRAM XG 1270 D1, 10-33T Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: Prime Primavera Carbon, 27.2mm, 10mm Offset, XS/S: 300mm M/L: 350mm XL/XXL: 400mm Seat Screw: Vitesse EVO Integrated, Internal Wedge System Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.