Birzman's Clam Disc Alignment Tool is an ingenious bit of kit that allows you to perfectly align your disc brake calipers to your rotors every time. Made of stainless steel, you simply slide the Clam onto the rotor, spin the wheel so the clam aligns with the caliper, pull the brake lever and tighten the caliper bolts and there you have it; a perfectly aligned disc and caliper! 3 Clams are included to suit a range of caliper shapes.
This Gear Hanger Alignment Tool is made from strong, high-quality nickel plated steel and comes with a mounting bolt set in nylon bush to make usage simple and easy.
Giving you your best positioning and shaping in the pool ever, the Alignment Kickboard trains the body to give you every advantage possible in competition. The hydrodynamic profile of the board keeps you as streamlined as possible from head to toe, using any of the four main strokes, one arm drills or side kicking. Sitting just below the water line to lengthen your body to perfection to prevent kicking at the wrong angle while also relieving pressure on the shoulders for a more comfortable experience. A lightweight structure makes it perfect for travel, while its sturdy coated foam works hard to resist the wearing effects of chlorine.
Set the correct gap for any hydraulic brake caliper with the Lifeline Pro Disc Brake Caliper Alignment Tool. Easy to use and prevents brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor.Follow the simple steps below:Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side.Insert the Caliper Alignment Tool between the pads and the rotor.Pull the brake lever- forcing the pads against the alignment tool and in turn against the rotorWhile still holding on to the brake lever, tighten the bolts on the brake caliper.Release the brake lever and remove the tool and your pads should now be cantered to the rotor with an equal distance either side.Weight: 33gSize: 15cm x 3.5cmBlade length: 13cm
LifeLine Pro Disc Brake Caliper Alignment ToolLifeLine's disc brakes caliper alignment tool enables you to get optimum disc brake performance and equal brake pad spacing while reducing pad rubbing and brake squeal. This easy to use tool sets the correct clearance so that both brake pads connect with the rotor at the same time when you're applying pressure to the brake lever. Providing more efficient braking power and a greater pad-life, this essential maintenance tool should be in every disc brake user's toolbox.Follow the simple steps below: Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side Insert the Caliper Alignment Tool between the pads and the rotor Pull the brake lever, forcing the pads against the alignment tool and against the rotor While still holding on to the brake lever, tighten the bolts on the brake caliper Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either sideFeatures: Size: 15cm x 3.5cm Blade Length: 13cm Weight: 33gBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
The LifeLine Pro Gear Hanger Alignment Tool is designed to check and adjust the alignment of your rear derailleur hanger and solve most shifting problems, especially those with index shifting systems. If you cannot get your gears working 100% then your hanger alignment is most probably the reason and it is the first thing you should check.Threaded end threads into hanger threadsMeasuring pointer checks for parallelism against rear wheel
LifeLine Pro Gear Hanger Alignment ToolIf you're encountering shifting problems, your gear hanger may only need a slight adjustment to get your rear derailleur changing gear cleaning and efficiently again. Lifeline's alignment tool will help you to carefully and precisely make the required adjustments to your gear hanger, without damaging your hanger or the bike's frame.Reasons to Buy: Make careful and precise adjustments to your gear hanger. Resolve shifting problems easier. Won't cause damage to your hanger or frame.Features: Threaded end threads into hanger threads Measuring pointer checks for parallelism against rear wheelBuy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.
Thread the tool directly into your derailleur/mech hanger and use measuring bar to locate and mark the distance to the wheel at multiple points. Alignment is corrected by applying pressure to the arm of the tool at multiple intervals (90°, 180°, 270°, 360°) to give the best results.
An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problemsThe DAG-3 features an all-new design, engineered and built to be light, accurate and versatile,The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size being compatible with 16" to 29"+ wheels, whilst rotating out of the way to clear seat stays, racks, and other obstacles, allowing 360 degree measurement,The long, precision-extruded aluminium body is built to exacting tolerances and provides ample leverage for making adjustments,Thanks to the low-profile head, it fits low clearance thru-axle derailleur hangers and Shimano® Direct Mount hangers,Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
The Park Tool DAG2.2 Derailleur Hanger Alignment Gauge can help solve a multitude of derailleur shifting problems, most notably with index shifting systems. Updated over the longstanding DAG-1, the DAG-2.2 utilises a longer measuring pointer, longer threaded stud and a longer, narrower alignment boss to fit a wider variety of bikes. This tool is extremely steady in operation and is simple to use. The tool threads directly into the derailleur hanger. The gauge bar holds a gauge which marks the distance to the wheel. The gauge then is rotated with the wheel to the 3, 6, 9, and 12 o clock positions, noting any differences in measurements. The alignment of the derailleur hanger is accomplished by applying pressure to the tool s arm. The results can be checked instantly. The DAG-2.2 is made of heavy-gauge steel and is chrome plated for long shop life.
Park Tool Derailleur Hanger Alignment Gauge DAG2.2An essential tool for your workshop, this Derailleur Hanger Alignment Gauge from Park Tool makes quick work of the task at hand. Constructed from heavy-gauge, chrome-plated steel, this is a hard-wearing tool that is suitable for wheel sizes from 20" to 29" inch and works with all bicycles that feature a derailleur. Features:Gauge Bar Material: Heavy gauge, chrome-plated steelCompatibility: Compatible with virtually all derailleur-equipped bicycles including Shimano® Direct Mount hangersLength: 16 inches (41cm)Adjusts to fit 20" to 29"+ wheelsReplaceable threaded tipUpgraded large inner shaft for added strength*Tighter tolerances for improved accuracy*Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers**Compared to DAG-2Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.