Birzman's Clam Disc Alignment Tool is an ingenious bit of kit that allows you to perfectly align your disc brake calipers to your rotors every time. Made of stainless steel, you simply slide the Clam onto the rotor, spin the wheel so the clam aligns with the caliper, pull the brake lever and tighten the caliper bolts and there you have it; a perfectly aligned disc and caliper! 3 Clams are included to suit a range of caliper shapes.
Set the correct gap for any hydraulic brake caliper with the Lifeline Pro Disc Brake Caliper Alignment Tool. Easy to use and prevents brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor.Follow the simple steps below:Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side.Insert the Caliper Alignment Tool between the pads and the rotor.Pull the brake lever- forcing the pads against the alignment tool and in turn against the rotorWhile still holding on to the brake lever, tighten the bolts on the brake caliper.Release the brake lever and remove the tool and your pads should now be cantered to the rotor with an equal distance either side.Weight: 33gSize: 15cm x 3.5cmBlade length: 13cm
LifeLine Pro Disc Brake Caliper Alignment ToolLifeLine's disc brakes caliper alignment tool enables you to get optimum disc brake performance and equal brake pad spacing while reducing pad rubbing and brake squeal. This easy to use tool sets the correct clearance so that both brake pads connect with the rotor at the same time when you're applying pressure to the brake lever. Providing more efficient braking power and a greater pad-life, this essential maintenance tool should be in every disc brake user's toolbox.Follow the simple steps below: Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side Insert the Caliper Alignment Tool between the pads and the rotor Pull the brake lever, forcing the pads against the alignment tool and against the rotor While still holding on to the brake lever, tighten the bolts on the brake caliper Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either sideFeatures: Size: 15cm x 3.5cm Blade Length: 13cm Weight: 33gBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.,Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.,Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required..
Giving you your best positioning and shaping in the pool ever, the Alignment Kickboard trains the body to give you every advantage possible in competition. The hydrodynamic profile of the board keeps you as streamlined as possible from head to toe, using any of the four main strokes, one arm drills or side kicking. Sitting just below the water line to lengthen your body to perfection to prevent kicking at the wrong angle while also relieving pressure on the shoulders for a more comfortable experience. A lightweight structure makes it perfect for travel, while its sturdy coated foam works hard to resist the wearing effects of chlorine.
Thread the tool directly into your derailleur/mech hanger and use measuring bar to locate and mark the distance to the wheel at multiple points. Alignment is corrected by applying pressure to the arm of the tool at multiple intervals (90°, 180°, 270°, 360°) to give the best results.
LifeLine Pro Gear Hanger Alignment ToolIf you're encountering shifting problems, your gear hanger may only need a slight adjustment to get your rear derailleur changing gear cleaning and efficiently again. Lifeline's alignment tool will help you to carefully and precisely make the required adjustments to your gear hanger, without damaging your hanger or the bike's frame.Reasons to Buy: Make careful and precise adjustments to your gear hanger. Resolve shifting problems easier. Won't cause damage to your hanger or frame.Features: Threaded end threads into hanger threads Measuring pointer checks for parallelism against rear wheelBuy LifeLine from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine Pro Gear Hanger Alignment Tool is designed to check and adjust the alignment of your rear derailleur hanger and solve most shifting problems, especially those with index shifting systems. If you cannot get your gears working 100% then your hanger alignment is most probably the reason and it is the first thing you should check.Threaded end threads into hanger threadsMeasuring pointer checks for parallelism against rear wheel
Park Tool Wheel Alignment Gauge (WAG-5)To get the best performance from your wheels and bike, correctly dished wheels are vital. The Part Tool Portable wheel Dishing Tool makes the checking of wheel dish quick and accurate. You can easily ascertain how centrally the rim sits over the hub, avoiding the issues surrounding a poorly dished wheel, such as frame rub. Features:A sturdy yet portable wheel dishing toolFits wheels from 24 inches - 29 inches in diameter, including 700C road wheelsDisassembles quickly for storage or travelMade in the USALimited lifetime warrantyBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Taking it's reading directly from the dropout, the FAG-2 will precisely tell you what level of realignment is required to get your bike back to its peak performance. Off-kilter frames often have a detrimental impact on how your bike rides and even after wheel and derailleur adjustments, your wheels may still not be lined up properly. However, with this Frame Alignment Gauge and its retractable pointer, the exact realignment can be pin-pointed quickly and precisely for any size of bike. The FAG-2 is an ideal device to help make sure your bike and wheels are perfectly aligned for optimum performance.
Park Tool Frame Alignment Gauge (FAG-2) The Frame Alignment Gauge FAG-2 from Park Tool is a specifically designed device for accurate measurement of your frame's positioning, taking its reading with precision, direct from the drop out.Quick and Easy Alignment Measurement When your frame is off kilter with your wheels, shifting and tracking can often be impacted, lowering you and your bike's performance. Even after adjusting wheels and derailleurs, your frame may still not be in the right position. With the Frame Alignment Gauge FAG-2, you can quickly and accurately see exactly what realignment is required to straighten out the issue. Suitable for use on all types of bikes, the FAG-2 has a retractable pointer for making sure alignment is properly achieved on any size of bicycle. Features: Retractable pointer for use on all sizes and types of bike Accurate and precise alignment measurement, direct from the drop out Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.