An essential tool for measuring and straightening off-kilter hangers, the Park Tool derailleur hanger alignment tool has improved upon its predecessor, the DAG-2, with increased strength, tighter tolerances for greater accuracy and improved clearance and reach for a wider range of frame/hanger combinations. Adjustable to allow you to work on wheels ranging from 20" to 29" +, the heavy gauge steel and chrome plated Park Tool DAG-2.2 will also fit Shimano Direct Mount hangers, making it a fantastically versatile, must-have tool for anyone serious about maintaining their bike.
The Park Tool FAG2 Frame Alignment Gauge helps solve the problem of many bicycles not shifting or tracking properly. This can be the result of the front and rear wheels not being in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop-outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.
The Park Tool FFG2 Frame And Fork End Alignment Gauge Set helps to eliminate improperly aligned frame and fork dropouts. Such issues can cause bent axles and quick release skewers, as well as tracking and shifting problems. The updated FFG-2 quickly determines whether dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. Works on frames and forks with dropout spacing up to 160mm.
Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers, as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected, long handles and comfortable moulded grips afford plenty of leverage for straighteningWorks on frames and forks with dropout spacing up to 160 mm
Park Tool Frame & Fork Alignment Gauge Set (FFG-2)The Park Tool Frame & Fork Alignment Gauge Set FFG-2 is the ultimate toolset to determine if your bike/fork dropouts are out of alignment. Badly aligned dropouts, which are usually caused by frame bending can cause bent axles and skewers, and can also cause tracking, shifting and steering issues. Grip and Leverage for Dropout Re-AlignmentThe FFG-2 quickly and accurately enables you to determine if your bike frame or fork needs re-aligned. If there is an alignment error, the long leverage handles and comfortable moulded grips provide plenty of grip and leverage for straightening and re-aligning the dropouts.Features: Material: Chrome-Plated Steel Compatible Hub Widths: From 100 to 160mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
These T-shaped, long-levered tools are ideal for accurately determining bike/fork dropout misalignment and straightening them back to their optimum fitting. Comfortable moulded grips make the job of realignment quick and easy, preventing potential shifting, tracking and steering problems and damage to axles and quick-release skewers. A fantastic tool for an essential piece of maintenance, the Frame & Fork Alignment Gauge Set FFG-2 will keep you on the straight and narrow.
Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected long handles and comfortable moulded grips afford plenty of leverage for straighteningWorks on frames and forks with dropout spacing up to 160 mm
Park Tool Frame Alignment Gauge (FAG-2) The Frame Alignment Gauge FAG-2 from Park Tool is a specifically designed device for accurate measurement of your frame's positioning, taking its reading with precision, direct from the drop out.Quick and Easy Alignment Measurement When your frame is off kilter with your wheels, shifting and tracking can often be impacted, lowering you and your bike's performance. Even after adjusting wheels and derailleurs, your frame may still not be in the right position. With the Frame Alignment Gauge FAG-2, you can quickly and accurately see exactly what realignment is required to straighten out the issue. Suitable for use on all types of bikes, the FAG-2 has a retractable pointer for making sure alignment is properly achieved on any size of bicycle. Features: Retractable pointer for use on all sizes and types of bike Accurate and precise alignment measurement, direct from the drop out Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Taking it's reading directly from the dropout, the FAG-2 will precisely tell you what level of realignment is required to get your bike back to its peak performance. Off-kilter frames often have a detrimental impact on how your bike rides and even after wheel and derailleur adjustments, your wheels may still not be lined up properly. However, with this Frame Alignment Gauge and its retractable pointer, the exact realignment can be pin-pointed quickly and precisely for any size of bike. The FAG-2 is an ideal device to help make sure your bike and wheels are perfectly aligned for optimum performance.
Park Tool Professional Wheel Alignment Gauge WAG-4For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must.An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.Features:The WAG-4 allows easy checking of the dish on road, mountain, or BMX wheels from 16” to 29” (ETRTO or ISO rim sizing of 305-630)Works with any hub widthCan be accurately used with the tire still on the wheelWeight: 1.7lbs. (0.77 kilograms) Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Never let accuracy be your nemesis with this simple yet highly effective toolCan be used with or without the tyre fitted to the wheel, thanks to its innovative designEnsures the rim is centred between the locknuts of the wheel hubAny hub width can be accommodatedFits wheels from 16 to 29 inches
Park Tool Wheel Alignment Gauge (WAG-5)To get the best performance from your wheels and bike, correctly dished wheels are vital. The Part Tool Portable wheel Dishing Tool makes the checking of wheel dish quick and accurate. You can easily ascertain how centrally the rim sits over the hub, avoiding the issues surrounding a poorly dished wheel, such as frame rub. Features:A sturdy yet portable wheel dishing toolFits wheels from 24 inches - 29 inches in diameter, including 700C road wheelsDisassembles quickly for storage or travelMade in the USALimited lifetime warrantyBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.